Water Butt Pump

  
£59.99
Delivery Supplement:
(1)
  • No need to lug watering cans around
  • Powerful 400W pump filters out large particles
  • Also suitable for garden pond water changes
Product Information
Pump rainwater from your water butt straight to your hose

No need to lug watering cans around. Now you can pump the nutrient-rich rainwater in your water butt (or your used bath water) directly to your hosepipe or sprinkler. Powerful 400W pump filters out large particles, connects to a standard push-fit hose and delivers up to 5,200L per hour. Works on depth of 5cm-7m. Also suitable for garden pond water changes and in an emergency, pumping out floodwater. H130cm, with 10m mains cord.
Instruction
Reviews (1)
Write a review Write a service review
"Good Pump, Poor Instructions"
The only adjustment is the cut-in and cut-out levels and the instructions are very misleading. They refer to shortening the length of the cable between the pump and float. The float is connected by a sealed flexible tube (ie not a visible cable). Any attempt to shorten it would allow water ingress and ruin the pump. What they mean is that to reduce the range from 5cm / 50cm you push the tube into the clip on the side of the pump then adjust the length of tube protruding from the clip to the float. The more tube protruding the greater the range (but less than the 5/50 with the unclipped tube)
By Anonymous,  12 Mar 2024
Delivery