Dual-Band Wireless Range Extender extends the range of your router Eliminates most dead spots and provides the coverage you need for all your device... Dual-Band Wireless Range Extender extends the range of your router Eliminates most dead spots and provides the coverage you need for all your devices Multiple Ethernet ports allow you to connect up to four Internet-enabled AV devices Get greater WiFi range throughout your homeThe Dual-Band Wireless Range Extender extends the range of your router providing greater WiFi coverageeven in your backyard. It eliminates most dead spots and provides the coverage you need for all your devices.Connect 4 devicesMultiple Ethernet ports allow you to connect up to four Internet-enabled AV devices to bring the Web to your home theater.Dual-Band TechnologySimultaneous Dual-Band technology provides speeds of up to 300Mbps and extends the WiFi coverage of your existing router not included so you get coverage wherever you are in your home even in your backyard.Easy set upIts easy to set up and there is nothing to install so you can be up and running in just minutes. more...

Cabling: Ethernet Dell SFP Transceiver 1000BASE-SX for PowerConnect LC Connector The Dell™ SFP Transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with SFP (Small Form Factor Pluggable) footprint provides a full-duplex mode with bi-directional data transfer rate. The transceiver complies with Gigabit Ethernet and 1000GBase-SX standards such as IEEE STD 802.3z and IEEE Std 802.3ab. This product has been tested and validated on Dell systems to ensure it will work with your computer. It is supported by Dell Technical Support when used with a Dell system. more...

Cabling: Fiber Optic, Ethernet This easy-to-install Mini-GBIC (or SFP) module provides a simple way to add Gigabit functionality to your Linksys switch. Gigabit fiber is often used to connect two switches together. The technology used depends on the distance between the two switches. The LH module uses 1310 nanometer wavelength light in multimode or single-mode fiber optic cables, and can achieve distances up to 500 meters or 40 kilometers, depending on the fiber used. more...

5120 Mbps, GBIC Cabling: Network Package Qty: 1 Add, replace or upgrade SFP modules on Gigabit fiber equipment. The SFPG1580C Single-Mode Fiber Transceiver LC SFP w/ DDM (80km, 1550nm) offers a cost-effective way to add, replace or upgrade a Single-Mode LC port on your Gigabit fiber networking equipment or fiber media converter.Supporting data rates up to 1.25 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP/Mini-GBIC module can be installed into any networking device with an SFP Multi-Sourcing Agreement (MSA) compliant, or Cisco compliant mini GBIC port.Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot. more...

10240 Mbps, SFP (Mini GBIC) Cabling: Network Dell PCT 62xx/M6220/M8024 LC-LC Transceiver SFP+ Long-Reach Single-Mode for PowerConnect / PowerEdge M1000 Switch - Kit 10GbE optics are capable of up to 300M (short range) over multimode and 10km (long range) over single-mode fiber-optic cable. This SFP+ optic requires a module in the switch for it to work properly. This product has been tested and validated on Dell systems and is compatible with Dell systems. more...

10240 Mbps, GBIC Cabling: Serial, Ethernet Package Qty: 1 The industry-standard Cisco Gigabit Interface Converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. Cisco GBICs can be interchanged on a wide variety of Cisco products and can be intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, or 1000BASE-CWDM interfaces on a port-by-port basis. The Cisco 1000BASE-SX GBIC (WS-G5484) operates on ordinary multimode fiber (MMF) optic link spans up to 1815 feet (550 m) long. more...

Cabling: Network, Ethernet The ET91000LC2 1000 Mbps Gigabit Multimode Fiber Media Converter (LC, 550m) lets you extend a Gigabit Ethernet network over multimode fiber, at distances up to 550m (1804 ft).A cost-effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-LX/SX) fiber backbone, this GbE to MM fiber converter supports full Gigabit speeds for ideal network performance and scalability. Designed to offer a durable and convenient Ethernet-to-fiber solution, the Ethernet to LC Fiber converter features an all-steel chassis, and a simple plug-and-play installation with minimal configuration required.For added versatility, this fiber media converter supports standalone operation, or installation into the 20 Slot, 2U Rackmount Chassis (ETCHS2U), as well as a replaceable SFP slot. more...

10240 Mbps, SFP (Mini GBIC) Cabling: Ethernet Package Qty: 1 ProCurve Gigabit Ethernet Transceiver Module is a 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 m on multimode fiber. more...

2000 Mbps, Cabling: RJ-45 TRENDnet's TFC-1000 series Fiber Media Converter transforms 1000Base-T (Copper Gigabit) media to 1000Base-SX/LX (Fiber Gigabit) media and vice versa. TRENDnet Intelligent 1000Base-T to 1000Base-FX Multi-Mode SC Fiber Converter (550M; 1;800Ft.) - TFC-1000MSC TRENDnet's TFC-1000 series Fiber Media Converter transforms 1000Base-T (Copper Gigabit) media to 1000Base-SX/LX (Fiber Gigabit) media and vice versa. more...

Cabling: Antenna Watch DVD's/ cable on any TV in your home. Simple set-up and easy to use. Clear picture and sound quality via the use of an ultra high frequency (2.4GHz). Includes a remote control extender that enables you to control your device from the viewing location. Suitable for devices using Infra Red from 30kHz to 60kHz. more...

100 Mbps, Cabling: Fiber Optic, Ethernet Package Qty: 1 The Allied Telesis' range of Fast Ethernet Media converters provides a complete series of conversion devices, allowing users to extend the size of UTP and multi-mode fiber networks with the use of single-mode fiber cabling. Supporting SC-connected single-mode fiber, these converters can be used to extend networks up to a distance of 2km. All these media converters feature an internal MDI/MDIX switch, allowing the converter to be connected to PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This Link Test feature allows installers to check for cable faults without the need for expensive fiber optic test equipment. more...

2000 Mbps, Cabling: Network, Ethernet, RJ-45

2000 Mbps, Cabling: Network, Ethernet, RJ-45

1000 Mbps, SFP (Mini GBIC) Cabling: Fiber Optic, Ethernet inksys Gigabit Ethernet SX Mini-GBIC SFP Transceiver This easy-to-install Mini-GBIC (or SFP) module provides a simple way to add Gigabit functionality to your Linksys switch. Gigabit fiber is often used to connect two switches together. The technology used depends on the distance between the two switches. The SX module uses 850 nanometer wavelength light in multimode fiber optic cables, and can achieve distances up to 220 or 550 meters, depending on the fiber used. more...