Results for "wholesale blown glass"

Filter by:

  • £  6.95 P & P: £  0.00
    at g.htrading
    heart
  • £  82.50 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  29.00 P & P: £  4.99
    at decanted
    heart
  • £  99.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  35.00 P & P: £  4.00
    at grannnys-attic
    heart
  • £  100.00 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  10.00 P & P: £  3.90
    at whitneymae123
    heart
  • £  100.00 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  4.00 P & P: £  3.90
    at whitneymae123
    heart
  • £  56.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  8.99 P & P: £  3.90
    at carmella458
    heart
  • £  56.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  5.00 P & P: £  3.00
    at epicollectables
    heart
  • £  51.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  10.00 P & P: £  3.90
    at carmella458
    heart
  • £  9.99 P & P: £  1.00
    at gingerclive
    heart
  • £  15.00 P & P: £  3.00
    at grannnys-attic
    heart
  • £  0.99 P & P: £  3.89
    at micandmarv
    heart
  • £  6.00 P & P: £  3.90
    at whitneymae123
    heart
  • £  7.00 P & P: £  0.00
    at rozismundo
    heart
  • £  10.50 P & P: £  7.99
    at everlasting-designs-arte
    heart
  • £  16.02 P & P: £  0.00
    at granteaks
    heart
  • £  8.00 P & P: £  2.95
    at hobbie0
    heart
  • £  10.00 P & P: £  3.99
    at bigpjretail
    heart
  • £  6.99 P & P: £  2.90
    at brendpalme_9
    heart
  • £  0.99 P & P: £  2.90
    at billoddie2000
    heart
  • £  2.99 P & P: £  2.90
    at arud1228
    heart
  • £  4.99 P & P: £  3.95
    at chubbs444
    heart
  • £  0.99 P & P: £  3.80
    at k-heaton
    heart
  • £  16.00 P & P: £  6.99
    at everlasting-designs-arte
    heart
  • £  17.00 P & P: £  9.95
    at everlasting-designs-arte
    heart
  • £  34.00 P & P: £  8.95
    at everlasting-designs-arte
    heart
  • £  4.95 P & P: £  3.50
    at eileen_dover_it
    heart
  • £  16.96 P & P: £  3.95
    at paul_lower
    heart
  • £  7.95 P & P: £  3.20
    at mrsgold
    heart
  • £  4.20 P & P: £  4.90
    at uklondoneye
    heart
  • £  1.99 P & P: £  5.99
    at everlasting-designs-arte
    heart
  • £  4.19 P & P: £  3.25
    at rowanshospice
    heart
  • £  51.00 P & P: £  5.75
    at k.hodgkins
    heart
  • £  1.99 P & P: £  8.45
    at everlasting-designs-arte
    heart
  • £  1.99 P & P: £  7.99
    at everlasting-designs-arte
    heart
  • £  2.99 P & P: £  2.99
    at lceman45
    heart
  • £  11.50 P & P: £  6.99
    at everlasting-designs-arte
    heart
  • £  1.99 P & P: £  8.45
    at everlasting-designs-arte
    heart
  • £  1.99 P & P: £  7.99
    at everlasting-designs-arte
    heart
  • £  22.59 P & P: £  6.99
    at everlasting-designs-arte
    heart
  • £  0.99 P & P: £  4.00
    at nei_mcge
    heart
  • £  6.95 P & P: £  0.00
    at g.htrading
    heart
  • £  82.50 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  29.00 P & P: £  4.99
    at decanted
    heart
  • £  99.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
Page: 1 2 3 4 5 6 NEXT

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on wholesale blown glass

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.