Results for "1900 x 800 bath"

Filter by:

  • £  130.00 P & P: see site
    at Amazon
    help Shower tray; 900mm x 800mm x 40mm. Designed for 90mm High Flow Waste; waste fittings included; Hinged door: 6mm toughened safety glass to EN12150 standard. Fully opening access.; 1850mm to 1900mm high. Easyclean protective coating on glass. Power shower proof; Independently performance tested to EN14428 standard. Life Time Guarantee; Easy to assemble for both experienced builders and novice DIY home owners heart
  • £  289.84 P & P: £  7.92
    at Thomann
    help WHD KL 1900-T25, 2-Way ball speaker system, 50/70 W, 50-20.000 Hz, RAL 9016 white, 25W-ring transformer, 2500 mm steel cable/pull proof, 330 mm cicumfrance. Comments: High quality low-freq. response, high voice clarity through 360° sonic radiation. PA/Live Equipment / Speaker Cabinets for Installation (100V) heart
  • £  289.84 P & P: see site
    at Thomann
    help WHD KL 1900-T25, 2-Way ball speaker system, 50/70 W, 50-20.000 Hz, RAL 9016 white, 25W-ring transformer, 2500 mm steel cable/pull proof, 330 mm cicumfrance. Comments: High quality low-freq. response, high voice clarity through 360° sonic radiation. heart
  • £  148.00 P & P: see site
    at Amazon
    help Shower tray; 800mm x 800mm x 40mm. Designed for 90mm High Flow Waste; waste fittings included; Pivot shower door & Side panel: 6mm toughened safety glass to EN12150 standard.; 1900mm high. Easyclean protective coating on glass, power shower proof; Independently performance tested to EN14428 standard. Life Time Guarantee; Easy to assemble for both experienced builders and novice DIY home owners heart
  • £  45.95 P & P: £  0.00
    at feelunique.com
    help An uplifting and deeply relaxing bath oil. It leaves the skin incredibly soft and nourished and can relieve stress. Makes a brilliant bed-time bath ritual. A sensual bath oil with cold pressed oils of Jojoba, Rose Hip, Wheatgerm and Sunflower. Uplifting Jasmine lifts the spirits and relaxes the body, wonderful if suffering from stress or nervous exhaustion. A totally luxurious experience. Ingredients: Jojoba (Simmondsia Chinensis), Polyglyceryl-3 Diisostearate, Rose Hip (Rosa Canina), Sunflower Oil (Helianthus Annus), Jasmine (Jasminum Officinalis), Ylang Ylang (Cangadora odorata), Marigold (Calendula Officinalis), Carrot (Daucus Carrota), Vitamin E (Tochopherol). Directions: Add one or two capfuls of The Organic Pharmacy Jasmine Bath Oil to a warm bath and relax. heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 29cms long with 'easy-clean' rubber nozzles & on/off switch). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  160.00 P & P: see site
    at Amazon
    help Shower tray; 800mm x 760mm x 40mm. Designed for 90mm High Flow Waste; waste fittings included; Pivot door & Side panel: 5mm toughened safety glass to EN12150 standard.; 1900mm high. Easyclean protective coating on glass, power shower proof; Independently performance tested to EN14428 standard. Life Time Guarantee; Easy to assemble for both experienced builders and novice DIY home owners heart
  • £  299.99 P & P: £  0.00
    at BathEmpire
    help 10 Year Warranty,5mm of high gloss acrylic,Length: 1700mm,This bath comes complete with bath panel,Bath has no pre-drilled holes to give you the choice of wall, freestanding or deck mounted taps, heart
  • £  55.00 P & P: £  4.90
    at Made in Design
    help Fermob Seat cushion Mandarine Textile Ø 39 cm As a trompe-l'oeil effect, the cushion uses the pattern of the 1900® seats, hiding nothing of the subtle perforations: quite the reverse! A flashback to the mat of yesteryear, a vintage fantasy in a graphic two-tone. Guaranteed for outdoor use - Removable cover, machine washable at 30°C - 1 year guarantee - Magnetic fastening system for an optimum fit of the cushion onto the seat heart
  • £  179.99 P & P: £  34.95
    at BathEmpire
    help Bath has no pre-drilled holes to give you the choice of wall, freestanding or deck mounted taps, heart
  • £  70.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL STYLE VICTORIAN BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH SHOWER MIXER TAPS: Traditional Victorian Style Wall-mounted Bath/Shower Mixer Taps. The Body is Made from Brass with a polished 'mirror' chrome finish. The taps come with a Chrome handheld Shower Head with White handle & 1.5m Flexible Hose. It includes wall-mounting fittings (S Tails, Chrome cover plates & washers). The taps can either be fitted to a wall or vertical surface of a bath. Secure copper pipework is recommended, or alternatively a fixing plate kit may be required. The Distance between centres of the hot & cold inlets is 150mm (UK standard). From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The taps use 1/4 Turn Ceramic disc technology. The minimum water pressure recommendedis 1 bar. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  899.99 P & P: £  0.00
    at BathEmpire
    help 10 Year Warranty,25mm thick Composite Stone,Please note: This bath has a high quality 162kg Composite Stone build,Length: 1600mm,Bath is only suitable for wall-mounted or freestanding taps, heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  159.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty,Manufactured in the UK,Sanitary grade cell cast re-enforcement,Length: 1800mm,This bath requires side and end panels (sold separately), heart
  • £  80.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE DECK-MOUNTED BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface or ledge around a bath). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The recommended operating water pressure is 1 to 5 bars. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  39.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty,Thick durable MDF board,Suitable for BathEmpire straight baths,Gloss white finish,Width: 800mm, heart
  • £  74.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface around the edge of a bath). The body and fittings are solidly made from Brass with a polished 'mirror' Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  584.99 P & P: £  0.00
    at BathEmpire
    help 10 Year Warranty,Made with 5mm Acrylic,High gloss acrylic finish,Length: 1690mm,Bath has no pre-drilled holes to give you the choice of wall, freestanding or deck mounted taps, heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  79.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty, 4mm Tempered Safety Glass ,Reversible fitting,Polished Aluminium Frame, 10mm adjustment for out of line walls , heart
  • £  1,883.93 P & P: see site
    at Thomann
    help Larson Bros Stetson Style 2 VS 1900 acoustic steel guitar, made in europe france, dreadnought, calibrated carved solid alpin spruce top with laminated larson bracing, back and sides rosewood solid, dove-tail mahogany neck, ebony fretboard, 45mm nut width, scale 650mm, larson floral inlays, ebony bridge, finish nitro natural high polish, incl. case heart
  • £  549.99 P & P: £  0.00
    at BathEmpire
    help 10 Year Warranty,Made with 5mm Acrylic,High gloss acrylic finish,Length: 1815mm,Bath has no pre-drilled holes to give you the choice of wall, freestanding or deck mounted taps, heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting connections kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 16 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  129.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty, 8mm Tempered Safety Glass ,Double-sided EasyClean surface,Polished Aluminium Frame,20mm adjustment for out of line walls, heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  65.84 P & P: £  2.97
    at Plumbworld
    help Ideal Standard White 800mm End Bath Panel White Acrylic panel heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET: 1. '5 HOLE' DECK-MOUNTED DESIGNER BATH TAPS WITH PULL-OUT HAND SHOWER. Specification and Features: The set is solidly made from Brass with a polished Mirror Chrome finish. Individual hot and cold controls with 1/4 turn ceramic disc technology. Diverter control to enable switching between the bath spout and the hand shower. The height of the spout is some 26 cms and it has a reach of some 16 cms. There is a Pull out hand shower head on a 1.5m flexi hose. The hand shower is a Square 'Pencil' style one measuring some 20 cms long by 3 X 1 cms. The set comes with flexi hose connections. The minimum recommended water pressure 1 bar. 2. MONO MIXER BASIN TAP: The body is very solidly made from Brass with a highly polished Chrome Finish. The spout has a Swivel action, so it can be used with a dual sink/basin. It has Dual levers which use 1/4 Turn Ceramic Disc Technology. The overall height is approx 34 cms & the spout has a reach of some 17 cms. The tip of the spout is some 27 cms high from the base. The widest part of the body section is 12cms by 5.5 cms deep. It comes with flexible hoses and fittings. The recommended water operation pressure is between 1 to 5 bars. heart
  • £  79.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty,6mm Tempered Safety Glass,Double-sided EasyClean surface,Polished Aluminium Frame,Reversible fitting, heart
  • £  84.95 P & P: see site
    at OurTaps
    help Modern style Deck-mounted/Pillar Bath/Shower Mixer Taps with Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. These taps use 1/4 Turn Ceramic Disc Technology. The Taps come with a slimline 'Pencil' Handheld Head (plastichrome) & Flexible Hose. The spout swivels and has a mesh filter for smoother water flow. There is a 'diverter' lever on the lower central section of the body so you can switch the water between the spout and the shower hose. The required minimum water pressure is 0.5 bar, although 1+ bars is recommended (max 5 bars). The distance between the inlet centres is the UK standard 18 cms (180mm). The Tap handles are some 130mm high. The overall height is some 29 cms and centre of the tip of the spout is approx 15 cms from the centre of the body. The metal flexi hose measures 1.5 metres and there is a fixed wall mounted bracket (plastichrome) for the 'Pencil' shower head. The threaded base sections are approx 48mm long and are 3/4" BSP size (measure 1" diameter outside). Securing nuts/washers are supplied. heart
  • £  41.66 P & P: £  2.97
    at Plumbworld
    help Ideal Standard First End Bath Panel White Acrylic panel heart
  • £  65.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER MIXER WITH HAND SHOWER SET AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. Included with this is a Chrome Handheld Shower Head (3 spray positions, 'plastichrome'), a 1.5m Flexible hose and a wall-mounted bracket ('plastichrome') for the shower head. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  34.97 P & P: £  2.97
    at Plumbworld
    help Vasari MDF Gloss White Bath Panel 800mm Features & Benefits: Complete the look of your new bath with a Vasari Hi-gloss wooden bath panel. Vasari MDF White Bath End Panel Extremely hardwearing impact resistant surfaces MDF construction with a veneer finish Please note that due to the thickness of these panels they can not be used with Whirlpool Baths Length: 800 mm Height: 480 mm Thickness : 15 mm Weight: 1 kg Adjustable plinth height: 100mm 2 piece with adjustable height plinth heart
  • £  99.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a matching Extra Large 'Multi-Spray' Handheld Shower Head (6" diameter, 29cms long, rubber nozzles, on/off switch, and made from 'plastichrome'), a 1.7m Flexi hose and an adjustable shower rail with sliding holder for the shower head. The Adjustable Shower Rail measures approx 58cms in length and the body is made of brass with a chrome finish. The ends, sliding holder and soap dish are plastichrome. It comes with fittings. heart
  • £  27.99 P & P: £  0.00
    at Argos.co.uk
    help Prepare the perfect cup of tea with this 1900ml teapot that has a classic shape with a modern twist. The spout it designed for perfect pouring and will make a great addition to any kitchen décor. Enjoy the perfect cup of tea with Sabichi's wide range of teapots. Stainless steel. 1.9 litre capacity. Size H16.5cm. EAN: 5021961095282. heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 23cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  29.17 P & P: £  0.00
    at eBay.co.uk
    help shop categories carpet fitters tools carbon brushes engineering tools hand tools home garden tools padlocks power tools power tool accessories mechanics tools sockets spanners tool bag organisers soldering irons woodworking tools car care shop pages home shipping returns contact us terms conditions special offers helpful links add to favorite sellers sign up to newsletter view feedback visit ebay shop draper small patio set cover 1900 x 800 mm 76232 item description draper small patio set cover heart
  • £  69.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a Multi function 'plastichrome' Handheld Shower Head, a 1.7m Stainless Steel Flexi hose and a 'plastichrome' adjustable/pivoting wall mounted bracket/holder for the shower head. heart
  • £  59.99 P & P: £  3.95
    at eBay.co.uk
    help earlex hv 1900 diy spray station 3 spray settings vertical horizontal spots garden decorating diy homeware lighting furniture bathroom kitchen christmas click hover to zoom earlex hv 1900 diy spray station 3 spray settings vertical horizontal spots 59 99 product details the earlex hv 1900 diy spray station is a complete paint spraying system for paints and varnishes and is suitable for all manner of tasks material plastic and metal features 3 spray patterns vertical horizontal and spots wattage heart
  • £  69.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a 'Pencil' style Handheld Shower Head, a 1.7m Stainless Steel Flexi hose and a 'plastichrome' adjustable/pivoting wall mounted bracket/holder for the shower head. heart
  • £  38.32 P & P: £  2.97
    at Plumbworld
    help Ideal Standard Uniliux Idealform+ End Bath Panel White Acrylic panel heart
  • £  84.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and 'Pencil' style Handheld Shower Head (approx 20cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  24.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty,Manufactured in the UK,Sanitary grade cell cast acrylic re-enforcement,Length: 800mm,Bath has no pre-drilled holes to give you the choice of wall, freestanding or deck mounted taps, heart
  • £  155.03 P & P: see site
    at Rubber Sole
    help Camper 1900 LAND men Mid Boots in BLACK Leather, Available in men's sizes. 5,7,8,9,10. Free Next Day Delivery and Free Returns on all orders! heart
  • £  59.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty, 5mm Tempered Safety Glass ,Reversible fitting,Polished Aluminium Frame, 25mm adjustment for out of line walls , heart
  • £  175.99 P & P: see site
    at Rubber Sole
    help Camper 1900 LAND men Mid Boots in Black Leather, Available in men's sizes. 11,12,6,7,8,9,10. Free Next Day Delivery and Free Returns on all orders! heart
  • £  24.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty,Manufactured in the UK,Sanitary grade cell cast acrylic re-enforcement,Width: 800mm,Bath has no pre-drilled holes to give you the choice of wall, freestanding or deck mounted taps, heart
  • £  150.99 P & P: see site
    at Rubber Sole
    help Camper 1900 LAND men Mid Boots in Black Leather, Available in men's sizes. 11,12,5,6,7,8,9,10. Free Next Day Delivery and Free Returns on all orders! heart
  • £  69.99 P & P: £  34.95
    at BathEmpire
    help 10 Year Warranty, 5mm Tempered Safety Glass ,Reversible fitting,Polished Aluminium Frame, 25mm adjustment for out of line walls , heart
  • £  155.03 P & P: see site
    at Rubber Sole
    help Camper 1900 LAND women Mid Boots in MEDIUM / Brown Leather, Available in women's sizes. 3,4,5,6,7,8. Free Next Day Delivery and Free Returns on all orders! heart
  • £  5.99 P & P: £  0.99
    at ebay.co.uk
    help daf 1900 copper washers x 10 application daf 1900 engines please check size with original you have these washers are supplied in a pack of ten as we find its better value for your money size 15 x 8 x 2 mm if you have any questions please ask please see our range of diesel and automotive parts in the merlin diesel ebay shop thank you for looking we will post worldwide all payments via paypal please heart
  • £  194.89 P & P: see site
    at Rubber Sole
    help Camper 1900 LAND women High Boots in Rust Leather, Available in women's sizes. 3,4,5,6,7,8. Free Next Day Delivery and Free Returns on all orders! heart
  • £  185.91 P & P: £  0.00
    at eBay.co.uk
    help visit our shop product description portable pressure washer for domestic use ensures efficient cleaning of vehicles caravans motor vans driveways boats etc the total stop valve automatically activates and deactivates the high pressure cleaner every time the trigger is operated thus increasing the life of the motor and reducing electricity consumption fitted with anti kink hose connector and supplied with 6 m of high pressure hose on hose cart wheel lance with interchangeable turbo or fixed jet h heart
  • £  68.10 P & P: see site
    at Thomann
    help Thon Case for Pioneer CDJ-800 CD Player, 7 mm Birchply, 1 Carry Handle, 4 rubber feet, fitted with 20mm Thick Foam, 380 x 200 x 430 mm, Weight 5,1 kg heart
  • £  46.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Again, see accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  1,740.60 P & P: see site
    at Thomann
    help Roland RD-800, Stage Piano, PHA-4 Concert Keyboard with Escapement and Ebony/Ivory Feel, equipped with touch-detection technology, SuperNATURAL Piano engine with Individual Note Voicing, Maximum Polyphony of 128 voices, 16 parts (4 parts are used in the live set), wide selection of acoustic pianos voiced for live playing, including a new Concert Grand tone derived from the V-Piano Grand, upright tones, and more, enhanced SuperNATURAL-based electric pianos and clavs with authentic vintage sound and feel, Over 1100 additional sounds for on stage, including Virtual Tone Wheel organs, vintage keys, modern synths, and many others, Intuitive interface designed for quick operation while performing, with fast access to essential functions such as tone layering, keyboard split point, and more, dedicated controls for Live Set selection, part levels, Modulation FX, Tremolo, Amp Simulator, and more, Tone Colour knob provides complex tonal manipulation in real time with a single control, Colour LCD and panel knobs with LED indicators provide easy visibility on dark stages, WAV recording/song playback and user memory backup with optional USB flash memory, Master MIDI keyboard controller features; four external pedal connections (Damper, FC1, FC2, and EXT), 1/4-inch and balanced XLR stereo output jacks; convenient 1/8-inch stereo input for connecting a music player or other device, Connector details: OUTPUT (L/MONO, R) jacks: 6,3mm phone type, OUTPUT (L, R) jacks: XLR type, INPUT jack: Stereo 3,5mm phone type, Pedal (DAMPER, FC1, FC2, EXT) jacks: TRS phone type, MIDI (IN, OUT1, THRU/OUT2) connectors, USB (COMPUTER) port: USB type B, USB (MEMORY/WLAN ADAPTOR) port: USB type A, PHONES jack: Stereo 6,3mm phone type, AC In jack, Included accessories: Owner's manual, Power cord, Damper pedal (capable of continuous detection), Cord clamp, Dimensions: 1400 x 367 x 138 mm, Weight 21,7 kg heart
  • £  46.95 P & P: see site
    at OurTaps
    help 'COMBO' WITH A SET OF MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A MATCHING SINGLE LEVER BASIN MONOBLOC MIXER. 1. BATH/SHOWER TAPS: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. NB. It is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. It is also possible to convert these bath taps into Deck-mounted ones by purchasing a set of Chrome Deck-mounting 'legs'. The distance between the centres at the base of the legs is approx 180mm / 18cms. They are solidly made from brass/chrome. To purchase, please see the Accessories section. 2. BASIN MONOBLOC MIXER TAPS: This Tap uses 1/4 Turn Ceramic Disc Technology with a single lever operation. The lever moves left/right for the temperature and up/down for on/off. The body is made from Brass with a polished 'mirror' Chrome Finish and the spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height is some 17 cms and the spout reaches some 9.5 cms from the body. The height from the base to the spout is 8.5 cms and the diameter of the body is 4.8 cms (the 'plinth' section is 5.2 cms). 0.5 bar water pressure is recommended. It includes 2 flexible hoses (BS Standard connections) along with fittings. There is a red/blue hot/cold indicator underneath the lever. heart
  • £  75.23 P & P: see site
    at Thomann
    help Thon mixer case for Pioneer DJM 800/850 - 2x butterfly locks, 1x folding handle. Dimensions: 400 x 180 x 490 mm (WxHxD). Weight: 5.36 kg heart
  • £  64.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are wall-mounted (i.e. they fit against a vertical surface). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a wall-mounting kit with BS Standard size 'S Tail' Connectors and Chrome Cover plates . The distance between inlet centres is the UK standard 150mm/15cms. The Tails allow a variation of approx +/- 2 cms to this to assist with fitting. These Taps can also usually be used with the vertical surface of a free standing bath. Secure pipework is necessary for fitting, or a wall fixing plate kit may be required. From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  145.00 P & P: £  0.00
    at a-r-bathrooms-ceramics
    heart
  • £  357.50 P & P: £  40.00
    at plumbprice07
    heart
  • £  286.88 P & P: £  40.00
    at plumbprice07
    heart
  • £  283.50 P & P: £  40.00
    at plumbprice07
    heart
  • £  95.00 P & P: £  18.00
    at showertraysanddoors
    heart
  • £  242.00 P & P: £  0.00
    at inspirationbathrooms2013
    heart
  • £  220.00 P & P: £  0.00
    at inspirationbathrooms2013
    heart
  • £  98.00 P & P: £  0.00
    at inspirationbathrooms2013
    heart
  • £  192.00 P & P: £  0.00
    at inspirationbathrooms2013
    heart
  • £  282.00 P & P: £  25.00
    at theshoweringshop
    heart
  • £  134.95 P & P: £  0.00
    at bathrooms2buy
    heart
  • £  278.33 P & P: £  0.00
    at Amazon UK
    help Manufacturer: Aqualux heart
  • £  249.32 P & P: £  0.00
    at Amazon UK
    help Manufacturer: Aqualux heart
  • £  164.25 P & P: see site
    at Amazon
    heart
  • £  998.99 P & P: see site
    at Amazon
    help Height: 1900mm; 6mm Toughened Glass; Mershield Stayclear Easy Clean Protected Glass; Includes FREE Merlyn MStone Tray and Waste; Lifetime Guarantee heart
  • £  1,008.99 P & P: see site
    at Amazon
    help Height: 1900mm; 6mm Toughened Glass; Mershield Stayclear Easy Clean Protected Glass; Includes FREE Merlyn MStone Tray and Waste; Lifetime Guarantee heart
  • £  440.25 P & P: see site
    at Amazon
    heart
  • £  140.00 P & P: see site
    at Amazon
    help Pivot Shower Door; 800mm x 5mm, 1900mm high; Pivot Door; 5mm toughened safety glass to EN12150 standard. Fully opening access.; 1850/1900mm high. Easyclean protective coating on glass. Power shower proof; Independently performance tested to EN14428 standard. Life Time Guarantee; Easy to assemble for both experienced builders and novice DIY home owners heart
  • £  189.75 P & P: see site
    at Amazon
    help Modern quadrant shower enclosures are ideal for family bathrooms, as they feature 6mm thick toughened safety glass, feature cushioned, quiet sliding doors with easy release rollers for quick installation and easy cleaning. heart
Page: 1 2 3 4 5 6 7 8 9 NEXT

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on 1900 x 800 bath

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.