Results for "adora taps"

Filter by:

  • £  49.99 P & P: £  0.00
    at eBay.co.uk
    help odeco adora massager in a bright refreshing turqoise made of the smoothest bodysafe silicone the rechargeable odeco adora arms you with 2 whole hours of nonstop orgasmic sensations it is charged via usb so you can even plug into your laptop and have it ready to use wherever you go switch between 7 different pulsation modes powered by an incredibly strong yet delightfully quiet motor the adora is a nice petite length of 8 inches making it nice and discreet to travel with it is also fully waterpro heart
  • £  81.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 29cms long with 'easy-clean' rubber nozzles & on/off switch). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  350.00 P & P: £  0.00
    at House of Fraser
    help Sizes: 16,18 From Collection 8 - a range of beautiful limited edition evening dresses. This full length evening dress with a sheer mesh top is beautifully embellished with 3D floral appliqué. This dress is fitted and flows into a soft fishtail skirt for a lovely feminine silhouette. Fully lined with a side zip fastening. , Gowns , Sleeveless , 100% Polyester, Lining: 100% Polyester.. heart
  • £  56.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  70.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL STYLE VICTORIAN BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH SHOWER MIXER TAPS: Traditional Victorian Style Wall-mounted Bath/Shower Mixer Taps. The Body is Made from Brass with a polished 'mirror' chrome finish. The taps come with a Chrome handheld Shower Head with White handle & 1.5m Flexible Hose. It includes wall-mounting fittings (S Tails, Chrome cover plates & washers). The taps can either be fitted to a wall or vertical surface of a bath. Secure copper pipework is recommended, or alternatively a fixing plate kit may be required. The Distance between centres of the hot & cold inlets is 150mm (UK standard). From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The taps use 1/4 Turn Ceramic disc technology. The minimum water pressure recommendedis 1 bar. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  209.95 P & P: £  0.00
    at eBay.co.uk
    help volkl adora women s skis 159 cm white green marker 3 motion 2013 209 95 rrp 299 95 30 off save 90 00 a great all mountain ski for beginner to intermediate level female skiers comes with marker 3 motion 10 0 lady bindings mounted on a track system volkl take their women s ski range very seriously instead of painting short men s skis in pink they design them from the ground up for a women s specific design giving you the very best available technology and performance the volkl adora drops right in heart
  • £  36.95 P & P: £  2.96
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  209.95 P & P: £  0.00
    at eBay.co.uk
    help volkl adora women s skis 153 cm white green marker 3 motion 2013 209 95 rrp 299 95 30 off save 90 00 a great all mountain ski for beginner to intermediate level female skiers comes with marker 3 motion 10 0 lady bindings mounted on a track system volkl take their women s ski range very seriously instead of painting short men s skis in pink they design them from the ground up for a women s specific design giving you the very best available technology and performance the volkl adora drops right in heart
  • £  48.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting connections kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 16 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  239.95 P & P: £  0.00
    at eBay.co.uk
    help volkl adora women s skis 159 cm white marker 3 motion 10 0 2015 239 95 rrp 299 95 20 off save 60 00 a great all mountain ski for beginner to intermediate level female skiers comes with marker 3 motion 10 0 bindings mounted on a track system volkl take their women s ski range very seriously instead of painting short men s skis in pink they design them from the ground up for a women s specific design giving you the very best available technology and performance the adora is back again as the entry heart
  • £  74.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  80.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE DECK-MOUNTED BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface or ledge around a bath). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The recommended operating water pressure is 1 to 5 bars. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  209.95 P & P: £  0.00
    at eBay.co.uk
    help volkl adora women s skis 166 cm white green marker 3 motion 2013 209 95 rrp 299 95 30 off save 90 00 a great all mountain ski for beginner to intermediate level female skiers comes with marker 3 motion 10 0 lady bindings mounted on a track system volkl take their women s ski range very seriously instead of painting short men s skis in pink they design them from the ground up for a women s specific design giving you the very best available technology and performance the volkl adora drops right in heart
  • £  78.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  74.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface around the edge of a bath). The body and fittings are solidly made from Brass with a polished 'mirror' Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  69.99 P & P: £  0.00
    at eBay.co.uk
    help authorised dealer of milkyway saga freetress and equal the largest suppliers of shake n go products on ebay buy with confidence at envisage wholesale colour available 1 1 b and 2 click here for colour chart please contact us for colour availability before you place an order you at envisage we have plenty more wigs and beauty products on offer that we don t sell on ebay email us if your after something you don t see as we may already have it in stock we are a sister company of one of the main dis heart
  • £  86.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET: 1. '5 HOLE' DECK-MOUNTED DESIGNER BATH TAPS WITH PULL-OUT HAND SHOWER. Specification and Features: The set is solidly made from Brass with a polished Mirror Chrome finish. Individual hot and cold controls with 1/4 turn ceramic disc technology. Diverter control to enable switching between the bath spout and the hand shower. The height of the spout is some 26 cms and it has a reach of some 16 cms. There is a Pull out hand shower head on a 1.5m flexi hose. The hand shower is a Square 'Pencil' style one measuring some 20 cms long by 3 X 1 cms. The set comes with flexi hose connections. The minimum recommended water pressure 1 bar. 2. MONO MIXER BASIN TAP: The body is very solidly made from Brass with a highly polished Chrome Finish. The spout has a Swivel action, so it can be used with a dual sink/basin. It has Dual levers which use 1/4 Turn Ceramic Disc Technology. The overall height is approx 34 cms & the spout has a reach of some 17 cms. The tip of the spout is some 27 cms high from the base. The widest part of the body section is 12cms by 5.5 cms deep. It comes with flexible hoses and fittings. The recommended water operation pressure is between 1 to 5 bars. heart
  • £  26.50 P & P: £  0.00
    at eBay.co.uk
    help dvs adora womens black nubuck 4 5 uk sku 355933 description the dvs adora are a pair of high impact women s skate shoes from dvs dvs was founded in 1995 by kevin dunlap and tim gavin and is based in torrance california sizing information dvs footwear sizing varies from other brands click here for more info features nubuck upper large dvs logo at side panel highly flexible lasting board feel padded tongue and collar sticky rubber outsole sure fit tongue straps open cell mesh tongue high impact in heart
  • £  51.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  229.95 P & P: £  0.00
    at Furniture In Fashion
    help • High Gloss White dining room storage furniture can also be used for a TV stand • Stylish Modern sideboard with chromed supports ideal for your home • Lots of storage with 2 doors & 1 drawers • Gloss white & silver handles look great in any home decor • Melamine surface provides the ultimate in protection against heat & scratches • Quality furniture from a respected german manufacturer • For your piece of mind know only the best materials & construction methods were used • At an affordable price and matching items available ,arrielle sideboard, ailee chest of drawers and the alexa chest of drawers. Dimensions: W160cm x D44cm x H75cm Our company philosophy is to carry 90% of our items in stock, however, there may be certain times in the year where demand has exceeded the supply and therefore our lead times for delivery may be extended. We would highly appreciate your cooperation and patience at all times. Where we are unable to deliver the items to yourself in a reasonable time, we will always keep you informed. Please regularly log into your account for regular updates. heart
  • £  51.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  12.15 P & P: £  3.00
    at eBay.co.uk
    help the adora details include high quality pu leather heeled ankle boots heel height approx 4 inches slip on fit please note return of this product is not acceptable in case of any problem do contact us first clearance product on sale about us payment shipping returns contact us la moda is an online accessories brand specialising in on trend fashionable products we re famous for our selection of arm candy shop our handbag collection from on trend studded tote bags to mini messenger bags backpacks an heart
  • £  56.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  84.95 P & P: see site
    at OurTaps
    help Modern style Deck-mounted/Pillar Bath/Shower Mixer Taps with Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. These taps use 1/4 Turn Ceramic Disc Technology. The Taps come with a slimline 'Pencil' Handheld Head (plastichrome) & Flexible Hose. The spout swivels and has a mesh filter for smoother water flow. There is a 'diverter' lever on the lower central section of the body so you can switch the water between the spout and the shower hose. The required minimum water pressure is 0.5 bar, although 1+ bars is recommended (max 5 bars). The distance between the inlet centres is the UK standard 18 cms (180mm). The Tap handles are some 130mm high. The overall height is some 29 cms and centre of the tip of the spout is approx 15 cms from the centre of the body. The metal flexi hose measures 1.5 metres and there is a fixed wall mounted bracket (plastichrome) for the 'Pencil' shower head. The threaded base sections are approx 48mm long and are 3/4" BSP size (measure 1" diameter outside). Securing nuts/washers are supplied. heart
  • £  300.00 P & P: £  7.50
    at eBay.co.uk
    help scroll to the bottom of our listing for our international shipping notes and delivery times international customers please only use express shipping due to the size of this item international kunden nur bitte express sbeförderung aufrgund der größe dieses skis clientes internacionales solamente el envío express por el tamaño de este skis clients internationaux utiliser uniquement livraison express en raison de la taille du présent skis master the first runs down the hill without fear and learn t heart
  • £  56.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  65.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER MIXER WITH HAND SHOWER SET AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. Included with this is a Chrome Handheld Shower Head (3 spray positions, 'plastichrome'), a 1.5m Flexible hose and a wall-mounted bracket ('plastichrome') for the shower head. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  77.00 P & P: £  0.00
    at eBay.co.uk
    help remonte r 9170 35 adora womens ladies red leather lace up boot returns accepted heart
  • £  63.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  99.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a matching Extra Large 'Multi-Spray' Handheld Shower Head (6" diameter, 29cms long, rubber nozzles, on/off switch, and made from 'plastichrome'), a 1.7m Flexi hose and an adjustable shower rail with sliding holder for the shower head. The Adjustable Shower Rail measures approx 58cms in length and the body is made of brass with a chrome finish. The ends, sliding holder and soap dish are plastichrome. It comes with fittings. heart
  • £  7.00 P & P: £  0.00
    at eBay.co.uk
    help 30 mm scale high quality metal cast miniature from terry pratchett discworld the miniature kit has 1 piece all miniatures supplied unpainted may require preparation and assembly provided with a 30 mm premium plastic round base created by kul asyrk payment within the uk payment by paypal credit debit card postal order or cheque outside of the uk payment by paypal credit debit card pos tage and packaging i pack my items as well as i can to try and ensure they reach you in good condition uk postage heart
  • £  141.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 23cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  74.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  46.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Again, see accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  78.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Adora. heart
  • £  46.95 P & P: see site
    at OurTaps
    help 'COMBO' WITH A SET OF MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A MATCHING SINGLE LEVER BASIN MONOBLOC MIXER. 1. BATH/SHOWER TAPS: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. NB. It is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. It is also possible to convert these bath taps into Deck-mounted ones by purchasing a set of Chrome Deck-mounting 'legs'. The distance between the centres at the base of the legs is approx 180mm / 18cms. They are solidly made from brass/chrome. To purchase, please see the Accessories section. 2. BASIN MONOBLOC MIXER TAPS: This Tap uses 1/4 Turn Ceramic Disc Technology with a single lever operation. The lever moves left/right for the temperature and up/down for on/off. The body is made from Brass with a polished 'mirror' Chrome Finish and the spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height is some 17 cms and the spout reaches some 9.5 cms from the body. The height from the base to the spout is 8.5 cms and the diameter of the body is 4.8 cms (the 'plinth' section is 5.2 cms). 0.5 bar water pressure is recommended. It includes 2 flexible hoses (BS Standard connections) along with fittings. There is a red/blue hot/cold indicator underneath the lever. heart
  • £  64.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are wall-mounted (i.e. they fit against a vertical surface). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a wall-mounting kit with BS Standard size 'S Tail' Connectors and Chrome Cover plates . The distance between inlet centres is the UK standard 150mm/15cms. The Tails allow a variation of approx +/- 2 cms to this to assist with fitting. These Taps can also usually be used with the vertical surface of a free standing bath. Secure pipework is necessary for fitting, or a wall fixing plate kit may be required. From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  75.00 P & P: see site
    at OurTaps
    help MATCHING 'COMBO' SET WITH QUALITY BATH PILLAR MIXER TAPS AND A PAIR OF BASIN HOT AND COLD TAPS. Specification & Features: 1. BATH PILLAR MIXER TAPS. Modern style Deck-mounted (Pillar style) Bath Mixer Taps which use 1/4 Turn Ceramic Disc Technology. The body is solidly made of brass and finished with highly polished Chrome. The 'Cross' style handles are Zinc Alloy. The spout has a mesh filter for smoother water flow. The recommended minimum water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. 2. BASIN TAPS: This is a pair of quality modern style bathroom basin Taps with 'X' handles. They are deck-mounted and they have a securing nut and washer on the threaded 'Tail' connections at the base (1/2" BSP). The bodies are solidly made of brass and finished with highly polished Chrome. The handles are zinc alloy, again finished in polished chrome. There is a diffuser in the end of the spouts for smooth water flow. The recommended minimum water pressure is 0.5 bars. The overall height of each tap is 11.5 cms and the spout reaches some 8.5 cms. They are operated using 1/4 Turn Ceramic Disc Technology. heart
  • £  90.00 P & P: see site
    at OurTaps
    help MATCHING 'COMBO' SET WITH QUALITY BATH/SHOWER MIXER TAPS AND A PAIR OF BASIN HOT AND COLD TAPS. Specification & Features: 1. BATH / SHOWER PILLAR MIXER TAPS. Modern style Deck-mounted (Pillar style) Bath / Shower Mixer Taps which use 1/4 Turn Ceramic Disc Technology. They come with a Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The 'Cross' style handles are Zinc Alloy. The spout has a mesh filter for smoother water flow. There is a 'diverter' lever on the front of the body so you can switch the water between the spout and the shower hose. The recommended minimum water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. The hose measures 1.5 metres and there is a fixed wall mounted bracket for the 'Pencil' shower head. 2. BASIN TAPS: This is a pair of quality modern style bathroom basin Taps with 'X' handles. They are deck-mounted and they have a securing nut and washer on the threaded 'Tail' connections at the base (1/2" BSP). The bodies are solidly made of brass and finished with highly polished Chrome. The handles are zinc alloy, again finished in polished chrome. There is a diffuser in the end of the spouts for smooth water flow. The recommended minimum water pressure is 0.5 bars. The overall height of each tap is 11.5 cms and the spout reaches some 8.5 cms. They are operated using 1/4 Turn Ceramic Disc Technology. heart
  • £  25.00 P & P: see site
    at OurTaps
    help PAIR OF BASIN TAPS: Specification & Features: This is a pair of quality modern style bathroom basin Taps with 'X' handles. They are deck-mounted and they have a securing nut and washer on the threaded 'Tail' connections at the base (1/2" BSP). The bodies are solidly made of brass and finished with highly polished Chrome. The handles are zinc alloy, again finished in polished chrome. There is a diffuser in the end of the spouts for smooth water flow. The recommended minimum water pressure is 0.5 bars. The overall height of each tap is 11.5 cms and the spout reaches some 8.5 cms. They are operated using 1/4 Turn Ceramic Disc Technology. heart
  • £  39.95 P & P: see site
    at OurTaps
    help MODERN STYLE DECK MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished 'mirror' Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Deck-mounting legs which have a distance between the centres at the base of the legs of 180mm/18cms. A minimum of 0.5 bar water pressure is recommended. It is also possible to purchase a Chrome Handheld Shower Head), a 1.5m Flexible hose and a wall-mounted bracket for the shower head for this item. Please see the Accessories Section. heart
  • £  75.00 P & P: see site
    at OurTaps
    help This is a 'Combo' set of quality modern style Deck-mounted 'Pillar' Bath Mixer Taps with a matching set of Monobloc Basin Mixer Taps. The Bath Pillar Taps are solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. They come with securing nuts. The recommended water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. The Monobloc Basin Mixer has dual 'X' handles. This Tap is deck-mounted and comes with a Pop-up waste, hoses/fittings. The body is solidly made of brass and finished with highly polished Chrome. There is a diffuser in the end of the spout for smooth water flow. The overall height is 22 cms and the spout reaches some 14 cms. Both Taps use Ceramic Disc Technology. heart
  • £  59.95 P & P: see site
    at OurTaps
    help Modern and Stylish Wall-mounted Bath/Shower Mixer Taps with the connection for a shower hose underneath the spout. The tap uses Ceramic Disc Technology and its Body is solidly made from Brass with polished Chrome Finish. The spout has a diffuser mesh at the end for smooth water flow. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The recommended water pressure is 1 bar. The distance between the inlet centres is the UK standard 15cms (150mm). The spout has a reach of some 16 cms from where the taps join the wall. There is an adjustable shower rail with 1.5m Flexible Shower Hose and Handheld Head (3 Spray positions). The Rail itself measures approx 64 cms in height and is made of brass with a chrome finish. It comes with a soap dish. We also sell Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. See the Accessories section. heart
  • £  38.95 P & P: see site
    at OurTaps
    help Single Lever Deck Mounted Bath/Shower Mixer tap. This tap uses Ceramic Disc Technology. It has a connection for Flexible Shower Hose under the spout. It is made from Brass with Chrome Finish. The distance between centres of the inlets at the back of the taps is 15cms. With the deck-mounting legs fitted, the overall gap at the base where they fit to a bath is 18cms (centre to centre). The main body height is 10cms and the spout reaches out approx 9cms. The recommended minimum water pressure is 1.0 bar. We do sell Flexible Hoses and Handheld Heads in the Shower Accessories section. heart
  • £  49.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  19.50 P & P: see site
    at OurTaps
    help A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  56.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Deck-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes a pair of Deck-mounting legs ('pillars') and 2 washers. The distance between the inlet centres where the legs fit onto the bath is the UK standard 18cms (180mm). From the tip of the spout to rear of the legs is some 19 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  84.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and 'Pencil' style Handheld Shower Head approx 20cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  94.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and 'Pencil' style Handheld Shower Head approx 20cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  69.95 P & P: see site
    at OurTaps
    help DECK-MOUNTED THERMOSTATIC BATH SHOWER MIXER TAPS. Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Deck-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. NB: To achieve 0.5 bars of pressure with a gravity tank you need a height drop of some 5 metres. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with Deck-mounting 'legs' which are attached to the rear of the taps using the nuts on the back of the taps. The distance between the centres of the 2 nuts is 150mm, however the distance between the inlet centres at the base of the 'pillar' legs is some 180mm (UK standard). The legs come with securing nuts/washers. The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  59.95 P & P: see site
    at OurTaps
    help Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Wall-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with standard wall-mounting connections including two 'S Tails', two Chrome Cover Plates and 2 filter washers. The distance between the inlet centres at the back of the taps is the UK standard 150mm / 15cms. The centre of the shower outlet, with the chrome cover plates attached, is some 65mm from the wall. The left control knob (as you look at the front of the taps) controls the water on/off. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap/Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  40.00 P & P: £  0.00
    at uktilesnwetrooms
    heart
  • £  49.99 P & P: £  0.00
    at plumbingsuppliesdirect24-7
    heart
  • £  99.99 P & P: £  0.00
    at tecazltd
    heart
  • £  28.50 P & P: £  0.00
    at comparethebathroom
    heart
  • £  82.00 P & P: £  0.00
    at pheonixrising77
    heart
  • £  130.00 P & P: £  0.00
    at pheonixrising77
    heart
  • £  160.00 P & P: £  0.00
    at pheonixrising77
    heart
  • £  161.00 P & P: £  0.00
    at pheonixrising77
    heart
  • £  225.00 P & P: £  0.00
    at pheonixrising77
    heart
  • £  52.00 P & P: £  0.00
    at pheonixrising77
    heart
  • £  80.00 P & P: £  0.00
    at pheonixrising77
    heart
  • £  29.99 P & P: £  5.00
    at tecazltd
    heart
  • £  34.99 P & P: £  5.00
    at tecazltd
    heart
  • £  42.49 P & P: £  5.00
    at tecazltd
    heart
  • £  67.00 P & P: £  0.00
    at comparethebathroom
    heart
  • £  98.80 P & P: £  0.00
    at comparethebathroom
    heart
  • £  26.99 P & P: £  0.00
    at comparethebathroom
    heart
  • £  99.90 P & P: £  0.00
    at comparethebathroom
    heart
  • £  97.00 P & P: £  0.00
    at comparethebathroom
    heart
  • £  50.00 P & P: £  10.00
    heart
  • £  39.52 P & P: £  0.00
    at Amazon UK
    help Vans G Adora Women's Multi Strap Bag Black Black Cross Size:30 X 16.5 X 34 cm heart
  • £  812.32 P & P: £  0.00
    at Amazon UK
    help Type:Microphone, Compliant Standards:Sound Blaster Cinema, Speakers:2 x right / left channel, Sound Output Mode:Stereo, Type:Integrated, Installed Size:2 MB, Cache Per Processor:2 MB, Form Factor:Integrated, Sensor Resolution:2 Megapixel, Type:3 in 1 card reader, Supported Flash Memory Cards:Memory Stick, heart
Page: 1 2 3 NEXT

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on adora taps

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.