Results for "bath click clack waste"

Filter by:

  • £  10.99 P & P: £  0.00
    at eBay.co.uk
    help bike repair stand bath click clack push up down waste with overflow free uk delivery description free mainland uk delivery bath waste with click clack plug chrome colour finish easy to use simply press and the waste pops up to allow drainage 5 year guarantee bath waste general information professionally packaged and shipped strong durable and easy to install 30 years trade experience unrivalled feedback order now to avoid disappointment wa 90 heart
  • £  183.20 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Crosswater. heart
  • £  9.50 P & P: see site
    at OurTaps
    help Clicker 'Click Clack' Slotted Pop-up Waste. The length of the body of the waste is some 75mm. The diameter of the body and threaded section at the bottom is 40mm so it fits a UK standard 'P' trap, etc. The top 'Plug' section measures 62mm across in diameter. The centre section pushes in by hand and springs up to open. It then pushes in again to close. The waste is solidly made from brass with a chrome finish. It comes with securing nut and rubber seals. heart
  • £  12.99 P & P: £  0.00
    at eBay.co.uk
    help bike repair stand bath click clack push up down waste with overflow free uk delivery description free mainland uk delivery bath waste with click clack plug chrome colour finish easy to use simply press and the waste pops up to allow drainage 5 year guarantee bath waste general information professionally packaged and shipped strong durable and easy to install 30 years trade experience unrivalled feedback order now to avoid disappointment wa 90 heart
  • £  39.95 P & P: £  2.96
    at Victorian Plumbing
    help Home Improvement from Victorian Plumbing. heart
  • £  70.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL STYLE VICTORIAN BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH SHOWER MIXER TAPS: Traditional Victorian Style Wall-mounted Bath/Shower Mixer Taps. The Body is Made from Brass with a polished 'mirror' chrome finish. The taps come with a Chrome handheld Shower Head with White handle & 1.5m Flexible Hose. It includes wall-mounting fittings (S Tails, Chrome cover plates & washers). The taps can either be fitted to a wall or vertical surface of a bath. Secure copper pipework is recommended, or alternatively a fixing plate kit may be required. The Distance between centres of the hot & cold inlets is 150mm (UK standard). From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The taps use 1/4 Turn Ceramic disc technology. The minimum water pressure recommendedis 1 bar. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  11.49 P & P: £  0.00
    at eBay.co.uk
    help bike repair stand bath pop up waste with overflow free uk delivery description free mainland uk delivery bath waste with clicker plug chrome colour finish easy to use simply press and the waste pops up to allow drainage 5 year guarantee bath waste general information professionally packaged and shipped strong durable and easy to install 30 years trade experience unrivalled feedback order now to avoid disappointment wa 96 heart
  • £  44.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Victorian Plumbing. heart
  • £  80.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE DECK-MOUNTED BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface or ledge around a bath). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The recommended operating water pressure is 1 to 5 bars. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  13.49 P & P: £  0.00
    at eBay.co.uk
    help bike repair stand bath pop up waste with overflow free uk delivery description free mainland uk delivery bath waste with clicker plug chrome colour finish easy to use simply press and the waste pops up to allow drainage 5 year guarantee bath waste general information professionally packaged and shipped strong durable and easy to install 30 years trade experience unrivalled feedback order now to avoid disappointment wa 96 heart
  • £  124.94 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Mayfair Toilet Seats. heart
  • £  8.00 P & P: see site
    at OurTaps
    help Chrome Plug slotted Pop-up Waste with 3 connecting Rods. The length of the body of the waste is adjustable. The 'Plug' section measures 6cms across. The rod with the knob at the end can be bent to suit. heart
  • £  17.95 P & P: £  0.00
    at eBay.co.uk
    help supaplumb click clack bath waste and overflow product description for a bathroom fitting that embodies the most up to date design features it is difficult to look beyond this excellent click clack bath waste modern click clack bath wastes have really come into their own in the modern bathroom over the last few years the simplicity of the mechanism and the compact nature of the fitting very much lend them to a clean uncluttered bathroom layout operated simply by pressing the top to open and then heart
  • £  39.95 P & P: £  2.96
    at Victorian Plumbing
    help Home Improvement from Victorian Plumbing. heart
  • £  65.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER MIXER WITH HAND SHOWER SET AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. Included with this is a Chrome Handheld Shower Head (3 spray positions, 'plastichrome'), a 1.5m Flexible hose and a wall-mounted bracket ('plastichrome') for the shower head. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  27.00 P & P: £  0.00
    at eBay.co.uk
    help pura cb 105 click clack bath waste overflow assembly in polished chrome designed for use with acrylic steel baths 1 1 2 waste size for standard uk baths this is a top quality waste with brass components to ensure trouble free long life the push button chrome cover simply unscrews from the main body of the waste for ease of cleaning and maintenance supplied with a 10 year guarantee don t compare this with other wastes of inferior quality you will not be disappointed with this superb quality bath heart
  • £  15.99 P & P: £  7.99
    at Victoria Plumb
    help Indoor Living from Plumb. heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 29cms long with 'easy-clean' rubber nozzles & on/off switch). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  11.90 P & P: £  0.00
    at eBay.co.uk
    help product features style contemporary finish polished waste type click clack guarantee 10 year manufacturer with an unsurpassed reputation for quality the home of ultra product range provides a thoroughly dependable design solution for any modern bathroom the ultra chrome easyclean sprung plug bath waste with minimalist overflow e 327 is manufactured to the highest standard you should expect nothing less from a company with over two decades of manufacturing experience which has provided ultra with heart
  • £  49.94 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Victorian Plumbing. heart
  • £  74.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface around the edge of a bath). The body and fittings are solidly made from Brass with a polished 'mirror' Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  8.99 P & P: £  0.00
    at eBay.co.uk
    help bike repair stand new hair catching click clack w aste slotted plug free uk delivery description free mainland uk delivery basin waste with hair catching basket built in easy to remove and clear chrome colour finish easy to use simply press and the waste pops up to allow drainage 5 year guarantee 1 5 inch connection basin waste slotted general information professionally packaged and shipped strong durable and easy to install 30 years trade experience unrivalled feedback order now to avoid disapp heart
  • £  159.20 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Crosswater. heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  10.99 P & P: £  0.00
    at eBay.co.uk
    help bike repair stand new hair catching click clack w aste slotted plug free uk delivery description free mainland uk delivery basin waste with hair catching basket built in easy to remove and clear chrome colour finish easy to use simply press and the waste pops up to allow drainage 5 year guarantee 1 5 inch connection basin waste slotted general information professionally packaged and shipped strong durable and easy to install 30 years trade experience unrivalled feedback order now to avoid disapp heart
  • £  41.60 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Crosswater Tap Collection. heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  12.99 P & P: £  0.00
    at eBay.co.uk
    help square round push button pop up bath waste trap overflow plug ball chain a new waste is an essential element when planning your new bathroom suite these stylish bath wastes are polished in high quality chrome creating a silky feel surface and mirror like sheen also tarnish and corrosion resistant you have three types to choose from 1 twist mechanism pop up waste 2 push button click clack pop up waste 3 ball chain plug waste please note you should choose which accessories you want to purchase thi heart
  • £  132.00 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Crosswater Tap Collection. heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting connections kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 16 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  19.50 P & P: £  0.00
    at eBay.co.uk
    help bath clicker waste rrp 35 95 brand new high quality bath waste with clicker plug and concealed overflow port modern stylish design to fit any standard bath fittings includes sealing washers matching basin clicker waste available in our ebay shop fast same working day despatch and free postage and packaging heart
  • £  156.00 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Crosswater Tap Collection. heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  10.95 P & P: £  0.00
    at eBay.co.uk
    help bath clicker waste overflow kit 10 year guarantee strong durable construction click clack plug easy to clean chrome plated finish easy to fit fits all standard baths waste length 600 mm freepost heart
  • £  39.95 P & P: £  2.96
    at Victorian Plumbing
    help Home Improvement from Victorian Plumbing. heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET: 1. '5 HOLE' DECK-MOUNTED DESIGNER BATH TAPS WITH PULL-OUT HAND SHOWER. Specification and Features: The set is solidly made from Brass with a polished Mirror Chrome finish. Individual hot and cold controls with 1/4 turn ceramic disc technology. Diverter control to enable switching between the bath spout and the hand shower. The height of the spout is some 26 cms and it has a reach of some 16 cms. There is a Pull out hand shower head on a 1.5m flexi hose. The hand shower is a Square 'Pencil' style one measuring some 20 cms long by 3 X 1 cms. The set comes with flexi hose connections. The minimum recommended water pressure 1 bar. 2. MONO MIXER BASIN TAP: The body is very solidly made from Brass with a highly polished Chrome Finish. The spout has a Swivel action, so it can be used with a dual sink/basin. It has Dual levers which use 1/4 Turn Ceramic Disc Technology. The overall height is approx 34 cms & the spout has a reach of some 17 cms. The tip of the spout is some 27 cms high from the base. The widest part of the body section is 12cms by 5.5 cms deep. It comes with flexible hoses and fittings. The recommended water operation pressure is between 1 to 5 bars. heart
  • £  15.95 P & P: £  0.00
    at eBay.co.uk
    help smartprice store supaplumb spw 30 click clack bath waste and overflow item comes well packed no quibbles return policy discounts available for multiple orders please do not hesitate to contact us bulk buyers please call us on 07723 369458 or contact us via ebay international buyers please contact us for a quote on shipping 633216 heart
  • £  44.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Victorian Plumbing. heart
  • £  46.95 P & P: see site
    at OurTaps
    help 'COMBO' WITH A SET OF MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A MATCHING SINGLE LEVER BASIN MONOBLOC MIXER. 1. BATH/SHOWER TAPS: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. NB. It is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. It is also possible to convert these bath taps into Deck-mounted ones by purchasing a set of Chrome Deck-mounting 'legs'. The distance between the centres at the base of the legs is approx 180mm / 18cms. They are solidly made from brass/chrome. To purchase, please see the Accessories section. 2. BASIN MONOBLOC MIXER TAPS: This Tap uses 1/4 Turn Ceramic Disc Technology with a single lever operation. The lever moves left/right for the temperature and up/down for on/off. The body is made from Brass with a polished 'mirror' Chrome Finish and the spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height is some 17 cms and the spout reaches some 9.5 cms from the body. The height from the base to the spout is 8.5 cms and the diameter of the body is 4.8 cms (the 'plinth' section is 5.2 cms). 0.5 bar water pressure is recommended. It includes 2 flexible hoses (BS Standard connections) along with fittings. There is a red/blue hot/cold indicator underneath the lever. heart
  • £  7.99 P & P: £  0.00
    at eBay.co.uk
    help bike repair stand basin clicker waste slotted full cover clicker plug free uk delivery description free mainland uk delivery basin waste with clicker plug with full cover clicker plug chrome colour finish easy to use simply press and the waste pops up to allow drainage 10 year guarantee 1 5 inch connection basin waste slotted basin sink waste clicker basin waste general information professionally packaged and shipped strong durable and easy to install 30 years trade experience unrivalled feedbac heart
  • £  109.94 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Mayfair Toilet Seats. heart
  • £  84.95 P & P: see site
    at OurTaps
    help Modern style Deck-mounted/Pillar Bath/Shower Mixer Taps with Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. These taps use 1/4 Turn Ceramic Disc Technology. The Taps come with a slimline 'Pencil' Handheld Head (plastichrome) & Flexible Hose. The spout swivels and has a mesh filter for smoother water flow. There is a 'diverter' lever on the lower central section of the body so you can switch the water between the spout and the shower hose. The required minimum water pressure is 0.5 bar, although 1+ bars is recommended (max 5 bars). The distance between the inlet centres is the UK standard 18 cms (180mm). The Tap handles are some 130mm high. The overall height is some 29 cms and centre of the tip of the spout is approx 15 cms from the centre of the body. The metal flexi hose measures 1.5 metres and there is a fixed wall mounted bracket (plastichrome) for the 'Pencil' shower head. The threaded base sections are approx 48mm long and are 3/4" BSP size (measure 1" diameter outside). Securing nuts/washers are supplied. heart
  • £  10.99 P & P: £  0.00
    at eBay.co.uk
    help opening hours 7 days 8 am to 8 pm sales cabinetsforbathrooms com about us contact us delivery returns faqs cloakroom cabinets units vanity cabinets units fitted bathroom furniture taps and mixers showers plumbing fittings hinges and handles kitchen accessories mirrors glass shelves fittings wcs basins and bathss push button click clack spring clicker pop up bath waste and overflow 10 99 product features polished chrome solid metal plug and overflow body 550 mm approx length click to close click heart
  • £  153.95 P & P: £  5.95
    at Victorian Plumbing
    help Home Improvement from Mayfair Toilet Seats. heart
  • £  99.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a matching Extra Large 'Multi-Spray' Handheld Shower Head (6" diameter, 29cms long, rubber nozzles, on/off switch, and made from 'plastichrome'), a 1.7m Flexi hose and an adjustable shower rail with sliding holder for the shower head. The Adjustable Shower Rail measures approx 58cms in length and the body is made of brass with a chrome finish. The ends, sliding holder and soap dish are plastichrome. It comes with fittings. heart
  • £  10.49 P & P: £  0.00
    at eBay.co.uk
    help essexplumbing store our store home contact us feedback add to favorite seller categories subscribe newsletter add our store in to your favourites and recieve our exclusive emails about new items and special promotions subscribe secure payments contact us description bath clicker waste overflow kit 10 year guarantee strong durable construction click clack plug easy to clean chrome plated finish easy to fit fits all standard baths waste length 600 mm freepost related items payment payment methods heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 23cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  11.25 P & P: £  0.00
    at eBay.co.uk
    help essexplumbing store our store home contact us feedback add to favorite seller categories subscribe newsletter add our store in to your favourites and recieve our exclusive emails about new items and special promotions subscribe secure payments contact us description easy clean clicker bath waste brass clicker flange fits standard 1 5 bath waste holes plastic trap 530 mm overflow waste pipe clicker can be lifted out for easy cleaning 10 year guarantee freepost related items payment payment method heart
  • £  46.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Again, see accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  12.95 P & P: £  0.00
    at eBay.co.uk
    help ebay store faq about us new push wirquin bath pop up plug 64 mm click clack all dimensions in advert genuine wirquin part abs plug and stem for wirquin pop up click clack wastes please check all dimensions before buying spring loaded operation found in some steamist wastes postage free 2 nd class delivery included 1 st class signed for or express option also available we are only able to offer postage to the u k alternatively you can collect your item s from our shop pipescenes ltd 540 portswood heart
  • £  75.00 P & P: see site
    at OurTaps
    help This is a 'Combo' set of quality modern style Deck-mounted 'Pillar' Bath Mixer Taps with a matching set of Monobloc Basin Mixer Taps. The Bath Pillar Taps are solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. They come with securing nuts. The recommended water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. The Monobloc Basin Mixer has dual 'X' handles. This Tap is deck-mounted and comes with a Pop-up waste, hoses/fittings. The body is solidly made of brass and finished with highly polished Chrome. There is a diffuser in the end of the spout for smooth water flow. The overall height is 22 cms and the spout reaches some 14 cms. Both Taps use Ceramic Disc Technology. heart
  • £  29.99 P & P: £  0.00
    at eBay.co.uk
    help bike repair stand bath exofill filler with control valve overflow sprung waste free uk delivery description free mainland uk delivery bath overflow filler waste control valve overflow chrome colour finish easy to use simply press and the waste pops up to allow drainage bath waste general information professionally packaged and shipped strong durable and easy to install 30 years trade experience unrivalled feedback order now to avoid disappointment wa 89 exofill heart
  • £  109.95 P & P: see site
    at OurTaps
    help This is a 'Combo' set of quality modern style Deck-mounted/Pillar Bath/Shower Mixer Taps with a matching set of Monobloc Basin Mixer Taps. 1. BATH/SHOWER MIXER: Modern style Deck-mounted/Pillar Bath/Shower Mixer Taps with Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. These taps use 1/4 Turn Ceramic Disc Technology. The Taps come with a slimline 'Pencil' Handheld Head (plastichrome) & Flexible Hose. The spout swivels and has a mesh filter for smoother water flow. There is a 'diverter' lever on the lower central section of the body so you can switch the water between the spout and the shower hose. The required minimum water pressure is 0.5 bar, although 1+ bars is recommended (max 5 bars). The distance between the inlet centres is the UK standard 18 cms (180mm). The Tap handles are some 130mm high. The overall height is some 29 cms and centre of the tip of the spout is approx 15 cms from the centre of the body. The metal flexi hose measures 1.5 metres and there is a fixed wall mounted bracket (plastichrome) for the 'Pencil' shower head. The threaded base sections are approx 48mm long and are 3/4" BSP size (measure 1" diameter outside). Securing nuts/washers are supplied. 2. BASIN MONOBLOC MIXER: The Monobloc Basin Mixer has dual 'X' handles. This Tap is deck-mounted and comes with a Basin Spring operated 'Clicker' Pop-up waste, hoses/fittings. The body is solidly made of brass and finished with highly polished Chrome. There is a diffuser in the end of the spout for smooth water flow. The overall height is some 34 cms and the spout reaches some 17 cms. The chrome plinth at the base is some 5 cms in diameter. The threaded base section below the plinth is approx 37mm long. Once again these Taps use Ceramic Disc Technology. heart
  • £  11.09 P & P: £  0.00
    at eBay.co.uk
    help essexplumbing store our store home contact us feedback add to favorite seller categories subscribe newsletter add our store in to your favourites and recieve our exclusive emails about new items and special promotions subscribe secure payments contact us description easy clean clicker bath waste brass clicker flange fits standard 1 5 bath waste holes plastic trap 530 mm overflow waste pipe clicker can be lifted out for easy cleaning 10 year guarantee freepost related items payment payment method heart
  • £  56.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Deck-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes a pair of Deck-mounting legs ('pillars') and 2 washers. The distance between the inlet centres where the legs fit onto the bath is the UK standard 18cms (180mm). From the tip of the spout to rear of the legs is some 19 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  5.95 P & P: £  0.00
    at eBay.co.uk
    help supabathrooms home about seller contact us terms faqs sign up to newsletter home accessories wall mounted accessories soap shampoo dispensers taps shower valves basin taps bath filler taps bath shower mixer taps basin wastes cabinets mirrors wooden cabinets stainless steel cabinets floor standing cabinets mirror cabinets showers complete shower enclosures tray riser kits toilets seats toilet wc cisterns back to wall units ceramic toilet pans close coupled toilets toilet suites pedestals cisterns heart
  • £  64.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are wall-mounted (i.e. they fit against a vertical surface). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a wall-mounting kit with BS Standard size 'S Tail' Connectors and Chrome Cover plates . The distance between inlet centres is the UK standard 150mm/15cms. The Tails allow a variation of approx +/- 2 cms to this to assist with fitting. These Taps can also usually be used with the vertical surface of a free standing bath. Secure pipework is necessary for fitting, or a wall fixing plate kit may be required. From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  5.95 P & P: £  0.00
    at eBay.co.uk
    help pop up basin waste bathroom chrome sink push button click clack plug slotted condition new free uk mainland delivery express delivery 8 95 easy to use push the centre and the waste will pop up and allow the water to drain away slotted push button perfect for basins with overflow standard 1 1 4 connection durable chrome finish our range of bath and basin wastes are made from high grade solid brass and chrome plated in a thick layer of chrome to ensure a long lasting highly reflective mirror finis heart
  • £  75.00 P & P: see site
    at OurTaps
    help MATCHING 'COMBO' SET WITH QUALITY BATH PILLAR MIXER TAPS AND A PAIR OF BASIN HOT AND COLD TAPS. Specification & Features: 1. BATH PILLAR MIXER TAPS. Modern style Deck-mounted (Pillar style) Bath Mixer Taps which use 1/4 Turn Ceramic Disc Technology. The body is solidly made of brass and finished with highly polished Chrome. The 'Cross' style handles are Zinc Alloy. The spout has a mesh filter for smoother water flow. The recommended minimum water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. 2. BASIN TAPS: This is a pair of quality modern style bathroom basin Taps with 'X' handles. They are deck-mounted and they have a securing nut and washer on the threaded 'Tail' connections at the base (1/2" BSP). The bodies are solidly made of brass and finished with highly polished Chrome. The handles are zinc alloy, again finished in polished chrome. There is a diffuser in the end of the spouts for smooth water flow. The recommended minimum water pressure is 0.5 bars. The overall height of each tap is 11.5 cms and the spout reaches some 8.5 cms. They are operated using 1/4 Turn Ceramic Disc Technology. heart
  • £  8.95 P & P: £  0.00
    at eBay.co.uk
    help pop up basin waste bathroom chrome sink push button click clack plug un slotted condition new free uk mainland delivery express delivery 8 95 easy to use push the centre and the waste will pop up and allow the water to drain away un slotted push button perfect for basins without overflow standard 1 1 4 connection durable chrome finish our range of bath and basin wastes are made from high grade solid brass and chrome plated in a thick layer of chrome to ensure a long lasting highly reflective mir heart
  • £  39.95 P & P: see site
    at OurTaps
    help MODERN STYLE DECK MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: These Taps uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished 'mirror' Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Deck-mounting Legs which have an inlet gap of 180mm/18cms centre to centre where they attach to the bath. A minimum of 0.5 bar water pressure is required although 1+ bar is recommended. NB. We also sell the matching Basin Mixer taps for this item. It is also possible to purchase a Chrome Handheld Shower Heads, a 1.5m Flexible hose and a wall-mounted bracket for the shower head to go with these taps. Please see the Accessories Section. heart
  • £  5.90 P & P: £  0.00
    at eBay.co.uk
    help supabathrooms home about seller contact us terms faqs sign up to newsletter home accessories wall mounted accessories soap shampoo dispensers taps shower valves basin taps bath filler taps bath shower mixer taps basin wastes cabinets mirrors wooden cabinets stainless steel cabinets floor standing cabinets mirror cabinets showers complete shower enclosures tray riser kits toilets seats toilet wc cisterns back to wall units ceramic toilet pans close coupled toilets toilet suites pedestals cisterns heart
  • £  39.95 P & P: see site
    at OurTaps
    help MODERN STYLE DECK MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished 'mirror' Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Deck-mounting legs which have a distance between the centres at the base of the legs of 180mm/18cms. A minimum of 0.5 bar water pressure is recommended. It is also possible to purchase a Chrome Handheld Shower Head), a 1.5m Flexible hose and a wall-mounted bracket for the shower head for this item. Please see the Accessories Section. heart
  • £  12.95 P & P: £  0.00
    at eBay.co.uk
    help ebay store faq about us new push wirquin bath pop up plug 64 mm click clack all dimensions in advert genuine wirquin part abs plug and stem for wirquin pop up click clack wastes please check all dimensions before buying spring loaded operation postage free 2 nd class delivery included 1 st class signed for or express option also available we are only able to offer postage to the u k alternatively you can collect your item s from our shop pipescenes ltd 540 portswood road southampton hampshire so heart
  • £  90.00 P & P: see site
    at OurTaps
    help MATCHING 'COMBO' SET WITH QUALITY BATH/SHOWER MIXER TAPS AND A PAIR OF BASIN HOT AND COLD TAPS. Specification & Features: 1. BATH / SHOWER PILLAR MIXER TAPS. Modern style Deck-mounted (Pillar style) Bath / Shower Mixer Taps which use 1/4 Turn Ceramic Disc Technology. They come with a Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The 'Cross' style handles are Zinc Alloy. The spout has a mesh filter for smoother water flow. There is a 'diverter' lever on the front of the body so you can switch the water between the spout and the shower hose. The recommended minimum water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. The hose measures 1.5 metres and there is a fixed wall mounted bracket for the 'Pencil' shower head. 2. BASIN TAPS: This is a pair of quality modern style bathroom basin Taps with 'X' handles. They are deck-mounted and they have a securing nut and washer on the threaded 'Tail' connections at the base (1/2" BSP). The bodies are solidly made of brass and finished with highly polished Chrome. The handles are zinc alloy, again finished in polished chrome. There is a diffuser in the end of the spouts for smooth water flow. The recommended minimum water pressure is 0.5 bars. The overall height of each tap is 11.5 cms and the spout reaches some 8.5 cms. They are operated using 1/4 Turn Ceramic Disc Technology. heart
  • £  59.95 P & P: see site
    at OurTaps
    help Modern and Stylish Wall-mounted Bath/Shower Mixer Taps with the connection for a shower hose underneath the spout. The tap uses Ceramic Disc Technology and its Body is solidly made from Brass with polished Chrome Finish. The spout has a diffuser mesh at the end for smooth water flow. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The recommended water pressure is 1 bar. The distance between the inlet centres is the UK standard 15cms (150mm). The spout has a reach of some 16 cms from where the taps join the wall. There is an adjustable shower rail with 1.5m Flexible Shower Hose and Handheld Head (3 Spray positions). The Rail itself measures approx 64 cms in height and is made of brass with a chrome finish. It comes with a soap dish. We also sell Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. See the Accessories section. heart
  • £  44.95 P & P: see site
    at OurTaps
    help Traditional Victorian Style Wall-mounted Bath/Shower Mixer Taps. The Body is Made from Brass with a polished 'mirror' chrome finish. The taps come with a Chrome handheld Shower Head with White handle & 1.5m Flexible Hose. It includes wall-mounting fittings (S Tails, Chrome cover plates & washers). The taps can either be fitted to a wall or vertical surface of a bath. Secure copper pipework is recommended, or alternatively a fixing plate kit may be required. The Distance between centres of the hot & cold inlets is 150mm (UK standard). From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The taps use 1/4 Turn Ceramic disc technology. The recommended operating water pressure is 1 to 5 bars. We also sell the Deck-mounted version of this tap (comes with a pair of Deck-mounting legs - see item order number 49). heart
  • £  39.50 P & P: see site
    at OurTaps
    help Single lever Wall-mounted Bath/Shower Mixer tap, and Shower set which has a Handheld Shower Head & Flexible metal hose. The taps come with a wall mounting kit (S tail connectors, chrome cover plates & washers). They uses ceramic Disc Technology. The connection for the Flexible Shower Hose is under the spout. The taps are made from Brass with Chrome Finish. The Distance between centres of the inlets at the back of the taps is 15cms. The main body height is 10cms and the spout reaches out approx 9cms. The recommended water pressure is 1 bar. The Flexible metal Hose measures 1.5m long and has standard 1/2" BSP connections. The Chrome Handheld Head is approx 25 cms long and the head itself is just over 9 cms wide. We also sell this tap as the deck-mounted version. heart
  • £  29.50 P & P: see site
    at OurTaps
    help Single lever Wall-mounted Bath/Shower Mixer tap. It comes with a wall mounting kit (S tail connectors, chrome cover plates & washers). It uses ceramic Disc Technology. It has a connection for Flexible Shower Hose under the spout and it is made from Brass with Chrome Finish. The Distance between centres of the inlets at the back of the taps is 15cms (150mm). The main body height is 10cms and the spout reaches out approx 9cms. The recommended water pressure is 1 bar minimum. We do sell Flexible Hoses and Handheld Heads in the Shower Accessories section. heart
  • £  54.95 P & P: see site
    at OurTaps
    help Deck Mounted and Stylish Victorian Style Bath/Shower Mixer Taps. The Body is Made from Brass with a polished Chrome Finish. It comes with a Chrome handheld Shower Head with White handle & Flexible Hose. It also includes a pair of Deck-mounting legs. The Distance between centres of the hot & cold inlets at the base of the legs is some 180mm (UK standard). From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The recommended operating water pressure is 1 to 5 bars. heart
  • £  38.95 P & P: see site
    at OurTaps
    help Single Lever Deck Mounted Bath/Shower Mixer tap. This tap uses Ceramic Disc Technology. It has a connection for Flexible Shower Hose under the spout. It is made from Brass with Chrome Finish. The distance between centres of the inlets at the back of the taps is 15cms. With the deck-mounting legs fitted, the overall gap at the base where they fit to a bath is 18cms (centre to centre). The main body height is 10cms and the spout reaches out approx 9cms. The recommended minimum water pressure is 1.0 bar. We do sell Flexible Hoses and Handheld Heads in the Shower Accessories section. heart
  • £  34.50 P & P: £  0.00
    at fitheowner
    heart
  • £  69.99 P & P: £  0.00
    at j_and_s_bathrooms
    heart
  • £  129.99 P & P: £  0.00
    at comparethebathroom
    heart
  • £  5.00 P & P: £  0.00
    at tradeinpostuk
    heart
  • £  13.95 P & P: £  0.00
    at plumbtap
    heart
  • £  59.00 P & P: £  0.00
    at e-plumbshop
    help FREE 24 HOUR DELIVERY OR LONDON COLLECTION OPEN MON-SAT heart
  • £  14.99 P & P: £  0.00
    at xcomputerltd
    heart
  • £  79.99 P & P: £  0.00
    at xcomputerltd
    heart
  • £  4.99 P & P: £  0.00
    at acceleration100
    heart
  • £  4.99 P & P: £  0.00
    at acceleration100
    heart
  • £  15.99 P & P: £  4.00
    at arthureffy
    heart
  • £  8.50 P & P: £  0.00
    at ashdownhomestore
    heart
  • £  18.50 P & P: £  3.50
    at e-plumbshop
    help 2-3 DAY DELIVERY OR FREE LONDON COLLECTION OPEN MON-SAT heart
  • £  47.97 P & P: £  0.00
    at homebathroom
    help 30 Years Trade Experience UK Seller 10 Yr Guarantee heart
  • £  49.97 P & P: £  0.00
    at homebathroom
    help 30 Years Trade Experience UK Seller 10 Yr Guarantee heart
  • £  54.99 P & P: £  0.00
    at e-plumbshop
    help FREE 24 HOUR DELIVERY OR LONDON COLLECTION OPEN MON-SAT heart
  • £  13.64 P & P: £  0.00
    at comparethebathroom
    heart
  • £  10.00 P & P: £  5.00
    heart
  • £  6.69 P & P: £  0.00
    at ibathuk
    heart
  • £  5.69 P & P: £  0.00
    at ibathuk
    heart
  • £  85.31 P & P: £  6.97
    at Plumbworld
    help Crosswater Bath Click Clack Waste With Filler With filler Standard heart
  • £  85.31 P & P: £  2.97
    at Plumbworld
    help Crosswater Bath Click Clack Waste With Filler With filler Standard heart
Page: 1 2 3 4 5 6 7 8 9 10 NEXT

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on bath click clack waste

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.