Results for "glass chimneys for candles"

Filter by:

  • £  178.08 P & P: see site
    at Amazon
    help Materials: Metal, Glass; Finish: Black; Assembly Instructions: This fixture does need to be hard wired. Minimal assembly required. Professional installation is recommended.; Input Voltage: 110-120V (North America), 220-240V (Europe, Australia, New Zealand); We will send you the appropriate light based on your voltage choice. heart
  • £  45.00 P & P: £  3.99
    at judesbitsnbobs
    heart
  • £  1.29 P & P: £  1.50
    at Grand Taps And Tiles
    heart
  • £  129.68 P & P: see site
    at Amazon
    help Beautiful Set Angel and Miner as candle holder; Dimensions L/W/H: 14 x 12 x 40 cm; Candles powered by electricity; With beautiful and bright colours and high quality wood, always an eye catcher.. We wish you much fun decorating your home; Exclusive product of Dekohelden24 heart
  • £  10.99 P & P: £  0.00
    at md-flashlights-etc-ltd
    heart
  • £  56.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  12.00 P & P: £  4.50
    at elimayboo
    heart
  • £  1.99 P & P: £  1.50
    at Grand Taps And Tiles
    heart
  • £  18.00 P & P: £  0.00
    at elimayboo
    heart
  • £  82.50 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  17.99 P & P: £  0.00
    at md-flashlights-etc-ltd
    heart
  • £  1.79 P & P: £  1.50
    at Grand Taps And Tiles
    heart
  • £  12.99 P & P: £  2.80
    at yosserpops
    heart
  • £  99.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  44.06 P & P: £  0.00
    at dion-chrisales
    heart
  • £  55.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  7.90 P & P: £  3.90
    at alltropos
    heart
  • £  51.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  26.99 P & P: £  0.00
    at em_home
    heart
  • £  27.99 P & P: £  0.00
    at lights_linen
    heart
  • £  27.79 P & P: £  0.00
    at tandemgoods
    heart
  • £  42.48 P & P: see site
    at simplybestprices-10to20dayshipping
    help FREE SHIPPING ON ALL ORDERS & FREE RETURNS heart
  • £  21.68 P & P: see site
    at shoppingmadeeasy2
    heart
  • £  666.00 P & P: see site
    at simplybestprices-10to20dayshipping
    help FREE SHIPPING ON ALL ORDERS & FREE RETURNS heart
  • £  46.93 P & P: see site
    at simplybestprices-10to20dayshipping
    help FREE SHIPPING ON ALL ORDERS & FREE RETURNS heart
  • £  4.99 P & P: £  3.00
    at madabouttheo
    heart
  • £  178.08 P & P: see site
    at Amazon
    help Materials: Metal, Glass; Finish: Black; Assembly Instructions: This fixture does need to be hard wired. Minimal assembly required. Professional installation is recommended.; Input Voltage: 110-120V (North America), 220-240V (Europe, Australia, New Zealand); We will send you the appropriate light based on your voltage choice. heart
  • £  45.00 P & P: £  3.99
    at judesbitsnbobs
    heart
  • £  1.29 P & P: £  1.50
    at Grand Taps And Tiles
    heart
  • £  129.68 P & P: see site
    at Amazon
    help Beautiful Set Angel and Miner as candle holder; Dimensions L/W/H: 14 x 12 x 40 cm; Candles powered by electricity; With beautiful and bright colours and high quality wood, always an eye catcher.. We wish you much fun decorating your home; Exclusive product of Dekohelden24 heart
Page: 1 2 3 4 5 6 7 8 9 10 NEXT

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on glass chimneys for candles

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.