Results for "digistat thermostat"

Filter by:

  • £  107.41 P & P: see site
    at Amazon
    help Flexible and versatile comfort control.; Automatic Summer/Winter time change.; Typical operating range 30 metres.; Installer options include: Freeze protection, Low & High limit set points and Intelligent delayed start.; Also features Holiday Programme and Access protection lock. heart
  • £  11.50 P & P: £  3.99
    at eBay.co.uk
    help this is a repair service send your scr i fix it i return it asap is your drayton iflo or british gas wireless thermostat not working correctly is the green heating light coming on but not the boiler is there no relay click audible when green light illuminates this is a common fault with drayton wireless scr receivers the capacitor inside ages becomes faulty causing the above faults sometimes intermittently i m offering a repair service to correct this fault for only 11 50 p p save yourself s by heart
  • £  44.00 P & P: see site
    at OurTaps
    help MINI VERTICAL EXPOSED 'TORPEDO' STYLE THERMOSTATIC SHOWER BAR VALVE WITH 1/2" BSP OUTLET. IT IS SUITABLE FOR A CARAVAN, MOTORHOME, MOBILE HOME, ETC. Specification & Features: This 'Torpedo' style Thermostatic Mixer Bar Valve is 'Exposed' and Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The minimum operating pressure is 0.25 bar, although it is recommended to operate at a higher pressure (max 5 bar). One knob controls the water flow. The other knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. The cold inlet is nearest the temperature control knob. The hot inlet is nearest the on/off knob. The Valve measures some 5 cms wide, it's body is 4cms deep and 20cms long. The distance between the inlet centres is some 45mm (same as a V100 Vertical valve). It comes with both a wall-mounting plate kit & both cranked offset threaded tails as well as straight tails with chrome plates so you have a choice of 3 installation ways! The inlets are 3/4" BSP size female. The Outlet is for a Flexi hose or Riser pipe. It is a 1/2" BSP male threaded connection (measures 3/4" diameter outside). This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  172.50 P & P: see site
    at Amazon
    help Twin-channel functionality; Plugs into the boiler fascia panel and automatically sets the current time, day and year; Comes with built-in pre-set programmes, but you can also choose your own settings to suit; Adjusts automatically with daylight savings time; Wireless heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 29cms long with 'easy-clean' rubber nozzles & on/off switch). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  109.90 P & P: see site
    at Amazon
    help Flexible and versatile comfort control.; Automatic Summer/Winter time change.; Typical operating range 30 metres.; Installer options include: Freeze protection, Low & High limit set points and Intelligent delayed start.; Comes complete with reciever. heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET: 2 WAY (2 OUTLET = DUAL FUNCTION) CHROME THERMOSTATIC SHOWER MIXER VALVE, RAIN SHOWER HEAD AND ARM WITH HAND SHOWER/RAIL KIT. 1. SHOWER VALVE Concealed Style Valve which requires a minimum depth of approx 6 cms. The body is solidly made from Brass and has 2 inlets for hot and cold. The inlets are 1/2" BSP threaded 'male' (they measure 3/4" across in diameter - outside). The Control handles are 'plastichrome'. In connecting it up Copper pipework is recommended. The 'exposed' Front Cover Plate is oval in shape. It is made of brass and is finished in polished chrome. It measures 180 X 170mm. The upper knob is a 'Ceramic Disc' Diverter on/off water control to the 2 outlets. The outlets are also 1/2" BSP threaded 'male'. It is possible to 'cap' one of the oulets if it is not required ('cap' not supplied). The lower knob controls the temperature thermostatically, for stability, comfort and safety. There is an override stop button set at 38 degrees C. The valve has an operating temperature range of 20-50 degrees C. The recommended operating water pressure is 1 to 5 bar, although it will work at 0.5 bar. This Valve works with unequal pressures (max unbalanced ratio of 5:1), and is suitable for Combi Boilers and Tank fed systems (subject to adequate pressure). 2. SHOWER HEAD: The Rain or 'Drench' style Shower Head measures 7.5" / 19cms in diameter. It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. It also has 'easy clean' rubber nozzles! 3. SHOWER ARM: The matching Chrome Shower Arm is wall-mounted and measures some 35cms long and has a drop of approx 7cms at the curved end. The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. NB. It is possible to exchange the Wall-mounted shower arm for a Ceiling-mounted one (6"/15cms long made from brass/chrome). The price is the same, however please check availability first. 4. ADJUSTABLE SLIDING RAIL WITH HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The adjustable shower rail measures approx 58 cms in height. The rail itself is made of brass with a chrome finish. The ends are 'plastichrome', as are the sliding shower holder and soap dish. The Flexible Shower Hose is 1.5m long comes with, and connects to, a Pencil style Handheld Shower Head, all with a Chrome Finish. A solidly made Chrome Wall Outlet completes the Combo set and enables you to connect the Flexi hose to the concealed pipework. heart
  • £  49.95 P & P: see site
    at OurTaps
    help MINI VERTICAL EXPOSED 'TORPEDO' STYLE THERMOSTATIC SHOWER BAR VALVE WITH 1/2" BSP OUTLET & HAND SHOWER SET. IT IS SUITABLE FOR A CARAVAN, MOTORHOME, MOBILE HOME, ETC. Specification & Features: 1. SHOWER VALVE: This 'Torpedo' style Thermostatic Mixer Bar Valve is 'Exposed' and Wall-mounted requiring exposed inlet feeds. The body is solidly made of brass and finished in polished Chrome. The minimum operating pressure is 0.25 bar, although it is recommended operate between 1 to 5 bars. One knob controls the water flow. The other knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. The Valve measures some 4.8 cms wide, it's body is 4cms deep and 20cms long. The distance between the inlet centres is approx 72mm. It comes with a wall-mounting kit & fixings. The wall mounting screws into the side of the valve body and the plate section is screwed to a wall. The inlets are 1/2" BSP size male (would suit standard female couplings with 15mm 'olive' joints on the other end). The Outlet, usually for a Flexi hose, has a 1/2" BSP male threaded connection (measures 3/4" diameter outside). This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. HAND SHOWER SET: In addition to the Shower valve, this includes a 1.5m Chrome/metal Flexible Hose and Chrome Handheld Shower Head which has 3 spray positions and rubber nozzles for easy cleaning. There is also a fixed wall mounted bracket/holder which pivots in 'plastichrome'. We can swap the shower head for a round slimlime 'pencil' style handheld head if you prefer (approx 20 cms long and 3 cms in diameter). Simply make your purchase and add a note. The price is the same. heart
  • £  23.50 P & P: see site
    at OurTaps
    help REPLACEMENT/REPAIR THERMOSTATIC CARTRIDGE FOR BATH MIXER & VARIOUS SHOWER VALVES: Symptoms: Does your tap/shower/valve no longer regulate the temperature effectively? Are you getting strange 'surging' or vibration noises? Are you is a hard water area like 60-65% of the UK? Solution: Simply change the cartridge, not the whole tap or shower! Specification & Features: Principally made from brass, this generic Thermostatic Cartridge is suitable for many manufacturers, and some of the types of Taps and Showers that we sell are shown in the Picture gallery above. The operating Temperature range is between 20 to 48 Degrees C, with safety override button at the 38 Degrees C position. The cartridge comes calibrated to 38 Degrees C with the handle and safety 'stop ring' already attached. To install it with a Bath Mixer Tap or Torpedo style Bar Shower valves, all you have to do is remove the grub screw on the body underneath (3mm Allen key is commonly required) and push it into place. With the concealed shower valves, the handle has to be removed and then the cartridge fitted separately. Lubrication may well be needed around the black rubber seals. Always ensure your water is off when fitting!! It can also be used to replace some older style cartridges (see picture). The Dimensions are: Total Length of Cartridge = 95mm. Widest section = 33mm diameter (round the thicker brass section where the grub screw hole is located). Base of cartridge to centre of Grub screw hole = 60mm. The 3 Black rubber washers are positioned at approx 7mm, 27mm and 47mm from the centre of the grub screw hole. Please check the images and the dimensions before purchasing and carefully compare to your one before installing. heart
  • £  33.95 P & P: see site
    at OurTaps
    help MINI VERTICAL EXPOSED 'TORPEDO' STYLE THERMOSTATIC SHOWER BAR VALVE WITH 1/2" BSP OUTLET. IT IS SUITABLE FOR A CARAVAN, MOTORHOME, MOBILE HOME, ETC. Specification & Features: This 'Torpedo' style Thermostatic Mixer Bar Valve is 'Exposed' and Wall-mounted requiring exposed inlet feeds. The body is solidly made of brass and finished in polished Chrome. The minimum operating pressure is 0.25 bar, although it is recommended operate between 1 to 5 bars. One knob controls the water flow. The other knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. The Valve measures some 4.8 cms wide, it's body is 4cms deep and 20cms long. The distance between the inlet centres is approx 72mm. It comes with a wall-mounting kit & fixings. The wall mounting screws into the side of the valve body and the plate section is screwed to a wall. The inlets are 1/2" BSP size male (would suit standard female couplings with 15mm 'olive' joints on the other end). The Outlet, usually for a Flexi hose, has a 1/2" BSP male threaded connection (measures 3/4" diameter outside). This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  119.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION ROUND STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 8"/20cms diameter Round 'Slimline style' Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top and rubber nozzles for easy cleaning. In addition there is a flexible 1.5 metre shower hose with separate Multi-spray function Handheld Head ('plastichrome') which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  119.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION ROUND STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 7"/18.5cms diameter Star 'Cloudburst' Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top. Water emanates from the centre as well as the 'prongs'. In addition there is a flexible 1.5 metre shower hose with separate round 'pencil' style Handheld Head (lightweight brass with a Chrome finish) which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  269.95 P & P: see site
    at OurTaps
    help LUXURY THERMOSTATIC SHOWER PANEL WITH BLACK TEMPERED GLASS: 1. Specification, features and whats Included: Shower Panel Tower or 'Column' with Black Tempered Glass Front and a 'brushed' Aluminium body. Solidly made metal/chrome control knobs. The upper knob is a Diverter Control for water flow and the lower one is a Thermostatic Temperature Control for comfort and safety. There is an override stop switch set at 38 degrees C. LCD Display showing the Temperature. This requires 2 X LR44 Batteries (not supplied). 8 individually adjustable Hydro-massage Water Spray Nozzles Jets. Each 'Jet' pivots separately and the spray pattern can be adjusted. Each Jet has some 14 spray holes in total (6 in the middle section and 8 surrounding them)! Large and solidly made (brass/chrome) 8" (20 cms) Overhead Shower Head with easy clean Rubber nozzles & Swivel joint on top. Adjustable Shower Arm (metal/chrome) - with 2 'wing-nut' mechanisms. Handheld Shower Head, with adjustable spray patters and its own wall mounted holder (no longer on the side of the Panel). The metal/chrome flexi hose is some 1.5m long. Bath Filler Spout (or 'Foot washer' as it is sometimes called!). Brackets/Fixings/Flexible Connection Hoses. 2. Water pressure/Dimensions/measurements: The recommended operating water pressure is between 1 to 5 bar. Overall width: 26 cms (The Black Glass is some 24.5 cms). Overall Height: 1.3 metres tall. Overall Depth of body: 7 cms. Main Shower head: 20cms diameter. Length of Arm from Glass front: 24 (to centre of Head connection). Bath Spout: 7.5 cms. Body Jets: 6 cms wide and 5.5 cms deep. 3. Installation: It is simple to install. It comes with 2 brackets which are screwed into a solid/secure wall, and there are 2 metal 'braces' across the back of the body which hang on these brackets. Then, you connect up the 2 Flexible hoses situated in the lower half of the body to your Hot and Cold water feeds. These flexi hoses are approx 50 cms long and have 1/2" BSP compression nuts on their ends (inside diameter 3/4"). The Shower will work with Combination Boiler systems, Gravity fed systems, Pumped hot water systems, un-vented hot water systems or Standard hot water cylinder type systems. heart
  • £  59.00 P & P: £  0.00
    at Beliani GmbH
    help The BioClear™ waterbed heater is positioned underneath the safety liner and the mattress. It is designed in such a way that it maintains the pre-set sleeping temperature that suits you best. The thermostat, which is easy to operate, can be adjusted to any temperature between 21°C and 38°C. Power supply: 220V. heart
  • £  89.90 P & P: £  0.00
    at Klarstein
    help The Chef is in the house! The Klarstein Omnichef 45W is a reliable oven, with a variety of uses and a chic design. Whether you happen to be baking, roasting, grilling or cooking; this smart kitchen helper always has the right tool on hand for the optimal preparation of so many dishes.With a remarkably strong 2000 watts of power, the oven heats its 45-liter cooking space with four heating elements. Depending on your preference, you can use upper heat, lower heat or a combination of both. A special feature of the oven is the convection and rotisserie function, which ensures that even heating up chicken, kebab skewers or other treats is made easy.The built-in timer can be adjusted up to a set time of 60 minutes and the thermostat- which is adjustable up to 230°C- gives the device the necessary options for a variety of dishes and recipes. After the set cooking time runs out, a beep lets you know that the work done.The easy-to-clean, stainless steel body of the Klarstein Omnichef 45W grill oven is equipped with non-slip feet, a stainless steel door handle and a large window made ??of safety glass, so your food is always in view. Everything is managed using the uncluttered control section, which has only three knobs with self-explanatory symbols.The accessories are just as extensive as the range of functions of the Klarstein Omnichef 45W oven. In addition to a grill rack, baking tray and spit, two brackets for easy removal also included in the delivery. heart
  • £  142.80 P & P: £  0.00
    at shreddingmachines.co.uk
    help The Rexel REM 820 is the perfect mobile shredder for busy executives needing to protect confidential and valuable information and highly sensitive documents at risk from identity theft and corporate fraud by shredding to a high security P-5 level. The advanced REM820 shredder cuts up to 9 x 70gsm sheets of paper to a micro-cut of 2 x 15mm per pass (8 at 80gsm)and can fit up to 220 shredded sheets in its compact 21 litre sized collection basket which also features a handy viewing window. The Rexel REM820 small office shredder is ultra quiet and space saving under desk or general use shredder model perfect for all sensitive and confidential data. The front opening pull out bin enables simple and mess free emptying of shredded paper and the self sealing waste paper bag makes recycling easy and is eco friendly too. Features include finger safe for additional safety (UL60950) and a overheat protection mode where the thermostat detects when the shredder motor has overheated and automatically switches to cools down mode. The high performance steel cutters are durable for continuous use and LED Electronic display keeps you in total control. heart
  • £  23.50 P & P: see site
    at OurTaps
    help REPLACEMENT/REPAIR THERMOSTATIC CARTRIDGE FOR BATH MIXER & VARIOUS SHOWER VALVES: Symptoms: Does your tap/shower/valve no longer regulate the temperature effectively? Are you getting strange 'surging' or vibration noises? Are you is a hard water area like 60-65% of the UK? Solution: Simply change the cartridge, not the whole tap or shower! Specification & Features: Principally made from brass, this generic Thermostatic Cartridge is suitable for many manufacturers, and some of the types of Taps and Showers that we sell are shown in the Picture gallery above. The operating Temperature range is between 20 to 48 Degrees C, with safety override button at the 38 Degrees C position. The cartridge comes calibrated to 38 Degrees C with the handle and safety 'stop ring' already attached. To install it with a Bath Mixer Tap or Torpedo style Bar Shower valves, all you have to do is remove the grub screw on the body underneath (3mm Allen key is commonly required) and push it into place. With the concealed shower valves, the handle has to be removed and then the cartridge fitted separately. Lubrication may well be needed around the black rubber seals. Always ensure your water is off when fitting!! It can also be used to replace some older style cartridges (see picture). The Dimensions are: Total Length of Cartridge = 95mm. Widest section = 33mm diameter (round the thicker brass section where the grub screw hole is located). Base of cartridge to centre of Grub screw hole = 60mm. The 3 Black rubber washers are positioned at approx 7mm, 27mm and 47mm from the centre of the grub screw hole. Please check the images and the dimensions before purchasing and carefully compare to your one before installing. heart
  • £  85.95 P & P: see site
    at OurTaps
    help COMBO SET: 1 WAY (1 OUTLET) CHROME THERMOSTATIC SHOWER MIXER VALVE, STAR / CLOUDBURST SHOWER HEAD AND ARM. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Valve is Wall-mounted and attaches to concealed pipework. The body and control knobs are solidly made of brass with a chrome finish. There is 1 outlet which is controlled by the upper knob. When installed it usually points upwards from the valve. This knob also controls the flow on water. Both the inlets and outlet are threaded male 1/2" BSP connections (3/4" diameter outside). The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degs C. The exposed 'mirror' chrome Front Plates (behind the control knobs) are some 75mm ('Thermo') & 80mm ('on/off') in diameter. The body of the Valve requires a minimum recess depth in the wall cavity of approx 6 cms. The distance between the centres of the control knobs is 10cms. The inlets are some 45mm centre to centre and have spring non-return valves inside. They are positioned as per the pictures of the valve on its own. As you look at the front of the valve, with the outlet pointing upwards, the cold inlet is on the right with the hot on the left. There are securing nuts on the body chambers to assist with installation. The recommended water pressure is between 1 and 5 bar and it will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. SHOWER HEAD: The Star or 'Cloudburst' style Shower Head measures some 7" / 18.5cms in diameter. It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. Water emanates from the body as well as the prongs! SHOWER ARM: The matching Chrome Shower Arm is wall-mounted and measures some 35cms long and has a drop of approx 7cms at the curved end. The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. NB. It is possible to exchange the Wall-mounted shower arm for a Ceiling-mounted one (6"/15cms long made from brass/chrome). The price is the same, however please check availability first. heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET OF A THERMOSTATIC SHOWER VALVE, RAIN HEAD AND CEILING-MOUNTED ARM. 1. SHOWER VALVE: This is a solidly made 'All Metal' Thermostatic Mixer Valve. This includes the control knobs. The upper knob controls the water on/off using 1/4 turn Ceramic Disc Technology. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. There is one outlet ('1 way') for one shower function. The front plate is finished with highly polished silver 'mirror' Chrome (please note that the lines shown in the picture above are reflections!). The plate measures 17.5cms wide by 22.5cms high. The body of the Valve requires a minimum recess depth of 7.5cms. The inlets/outlet are male 1/2" BSP, however it comes with adaptors to convert the inlets/outlet to 3/4" BSP female ones. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following (subject to adequate water pressure): Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. It comes with a Shower Head that is solidly made of Brass with a polished Chrome Finish. It measures some 7.5"/19cms in diameter and there is a swivel joint on top. The Nozzles are easy clean rubber! 3. The matching Ceiling-mounted Brass/Chrome Shower Arm measures 15cms / 6" long and has 1/2" BSP threaded ends. It comes with Chrome cover plate and securing nut. heart
  • £  30.90 P & P: £  0.00
    at Klarstein
    help The Klarstein HT004CV is a convection heater which is ideal for heating small to medium sized facilities, for example, sheds, garages or conservatories.The 2000W heating capacity can be adjusted with three heat settings, allowing you to adjust the thermostat according to the season or your personal preference.A huge advantage of the Klarstein HT004CV is its portability:Recessed handles and a relatively light weight permits easy transportation to the ideal location.The Klarstein HT004CV convection heater is able to be wall mounted, to prevent from tripping on the heater and to save precious space. heart
  • £  34.90 P & P: £  0.00
    at Klarstein
    help The Klarstein HT005CV is a convection heater which is ideal for heating small to medium sized facilities, for example, sheds, garages or conservatories.The 2000W heating capacity can be adjusted with three heat settings, allowing you to adjust the thermostat according to the season or your personal preference.An outstanding feature of the Klarstein HT005CV is the high-resolution timer that allows the ideal heating to suit your lifestyle.The timer has a dial to cover 24 hours a day, split into quarter-hour switches. By switching the individual pins on or off, you can control the heat down to every 15 minutes. This gives far better heating control than other heaters that often only have a simple sleep timer, or a maximum of 2 on/off times on the timer.Another big advantage of the Klarstein HT005CV is its portability:Recessed handles and a relatively light weight permits easy transportation to the ideal location.The Klarstein HT005CV convection heater is able to be wall mounted, to prevent from tripping on the heater and to save precious space. heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET OF A THERMOSTATIC SHOWER VALVE, STAR HEAD AND CEILING-MOUNTED ARM. 1. SHOWER VALVE: This is a solidly made 'All Metal' Thermostatic Mixer Valve. This includes the control knobs. The upper knob controls the water on/off using 1/4 turn Ceramic Disc Technology. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. There is one outlet ('1 way') for one shower function. The front plate is finished with highly polished silver 'mirror' Chrome (please note that the lines shown in the picture above are reflections!). The plate measures 17.5cms wide by 22.5cms high. The body of the Valve requires a minimum recess depth of 7.5cms. The inlets/outlet are male 1/2" BSP, however it comes with adaptors to convert the inlets/outlet to 3/4" BSP female ones. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following (subject to adequate water pressure): Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. It comes with a Star or Cloudburst Shower Head that is solidly made of Brass with a polished Chrome Finish. It measures some 8"/20cms across in diameter and there is a swivel joint on top. Water eminates from the body and the 'prongs'! 3. The matching Ceiling-mounted Brass/Chrome Shower Arm measures 15cms / 6" long and has 1/2" BSP threaded ends. It comes with Chrome cover plate and securing nut. heart
  • £  85.95 P & P: see site
    at OurTaps
    help COMBO SET: 1 WAY (1 OUTLET) CHROME THERMOSTATIC SHOWER MIXER VALVE, RAIN SHOWER HEAD AND ARM. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Valve is Wall-mounted and attaches to concealed pipework. The body and control knobs are solidly made of brass with a chrome finish. There is 1 outlet which is controlled by the upper knob. When installed it usually points upwards from the valve. This knob also controls the flow on water. Both the inlets and outlet are threaded male 1/2" BSP connections (3/4" diameter outside). The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degs C. The exposed 'mirror' chrome Front Plates (behind the control knobs) are some 75mm ('Thermo') & 80mm ('on/off') in diameter. The body of the Valve requires a minimum recess depth in the wall cavity of approx 6 cms. The distance between the centres of the control knobs is 10cms. The inlets are some 45mm centre to centre and have spring non-return valves inside. They are positioned as per the pictures of the valve on its own. As you look at the front of the valve, with the outlet pointing upwards, the cold inlet is on the right with the hot on the left. There are securing nuts on the body chambers to assist with installation. The recommended water pressure is between 1 and 5 bar and it will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. SHOWER HEAD: The Rain or 'Drench' style Shower Head measures 7.5" / 19cms in diameter. It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. It also has 'easy clean' rubber nozzles! SHOWER ARM: The matching Chrome Shower Arm is wall-mounted and measures some 35cms long and has a drop of approx 7cms at the curved end. The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. NB. It is possible to exchange the Wall-mounted shower arm for a Ceiling-mounted one (6"/15cms long made from brass/chrome). The price is the same, however please check availability first. heart
  • £  89.95 P & P: see site
    at OurTaps
    help COMBO SET: 1 WAY (1 OUTLET = 1 FUNCTION) CHROME THERMOSTATIC SHOWER MIXER VALVE, RECTANGULAR SHOWER HEAD AND WALL MOUNTED ARM. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Valve is Wall-mounted and attaches to concealed pipework. The body and control knobs are solidly made of brass with a chrome finish. There is 1 outlet which is controlled by the upper knob. When installed it usually points upwards from the valve. This knob also controls the flow of water. Both the inlets and outlet are threaded male 1/2" BSP connections (3/4" diameter outside). The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degs C. The exposed 'mirror' chrome Front Plates (behind the control knobs) are some 75mm ('Thermo') & 80mm ('on/off') in diameter. The body of the Valve requires a minimum recess depth in the wall cavity of approx 6 cms. The distance between the centres of the control knobs is 10cms. The inlets are some 45mm centre to centre and have spring non-return valves inside. They are positioned as per the pictures of the valve on its own. As you look at the front of the valve, with the outlet pointing upwards, the cold inlet is on the right with the hot on the left. There are securing nuts on the body chambers to assist with installation. The recommended water pressure is between 1 and 5 bar and it will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. SHOWER HEAD: The Rectangular Shower Head measures 233mm X 142mm (approx 9" X 5.5"). It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. It also has 'easy clean' rubber nozzles! SHOWER ARM: The matching Square style Chrome Shower Arm is wall-mounted and measures some 40cms long and has a drop of approx 7cms at the curved end. The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. heart
  • £  89.95 P & P: see site
    at OurTaps
    help COMBO SET: 1 WAY (1 OUTLET = 1 FUNCTION) CHROME THERMOSTATIC SHOWER MIXER VALVE, RECTANGULAR SHOWER HEAD AND WALL MOUNTED ARM. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Valve is Wall-mounted and attaches to concealed pipework. The body and control knobs are solidly made of brass with a chrome finish. There is 1 outlet which is controlled by the upper knob. When installed it usually points upwards from the valve. This knob also controls the flow of water. Both the inlets and outlet are threaded male 1/2" BSP connections (3/4" diameter outside). The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degs C. The exposed 'mirror' chrome Front Plates (behind the control knobs) are some 75mm ('Thermo') & 80mm ('on/off') in diameter. The body of the Valve requires a minimum recess depth in the wall cavity of approx 6 cms. The distance between the centres of the control knobs is 10cms. The inlets are some 45mm centre to centre and have spring non-return valves inside. They are positioned as per the pictures of the valve on its own. As you look at the front of the valve, with the outlet pointing upwards, the cold inlet is on the right with the hot on the left. There are securing nuts on the body chambers to assist with installation. The recommended water pressure is between 1 and 5 bar and it will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. SHOWER HEAD: The Square Shower Head measures 8" X 8" (20 X 20cms). It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. It also has 'easy clean' rubber nozzles! SHOWER ARM: The matching Square style Chrome Shower Arm is wall-mounted and measures some 40cms long and has a drop of approx 7cms at the curved end. The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. heart
  • £  19.95 P & P: £  5.95
    at iPaintStore
    help Thermilate Technologies unique insulating technology ensures the primer will reflect valuable heat back UP into the room, keeping you warmer for longer without increasing your heating system thermostat. Simply apply 2 coats of InsOfloor to dry floor surfaces including concrete, screed, wood, tile backer boards, bricks and block by brush or roller before laying your floor covering it will enhance the efficiency and reduce running costs when coated on beneath electric under floor heating systems too. InsOfloor bonds with tile adhesive extremely well ensuring a durable floor finish. heart
  • £  11.95 P & P: £  5.95
    at iPaintStore
    help Thermilate Technologies unique insulating technology ensures the primer will reflect valuable heat back UP into the room, keeping you warmer for longer without increasing your heating system thermostat. Simply apply 2 coats of InsOfloor to dry floor surfaces including concrete, screed, wood, tile backer boards, bricks and block by brush or roller before laying your floor covering it will enhance the efficiency and reduce running costs when coated on beneath electric under floor heating systems too. InsOfloor bonds with tile adhesive extremely well ensuring a durable floor finish. heart
  • £  89.90 P & P: £  0.00
    at Klarstein
    help The Chef is in the house! The Klarstein Omnichef 45C is a reliable oven, with a variety of uses and a chic design. Whether you happen to be baking, roasting, grilling or cooking; this smart kitchen helper always has the right tool on hand for the optimal preparation of so many dishes.With a remarkably strong 2000 watts of power, the oven heats its 45-liter cooking space with four heating elements. Depending on your preference, you can use upper heat, lower heat or a combination of both. A special feature of the oven is the convection and rotisserie function, which ensures that even heating up chicken, kebab skewers or other treats is made easy.The built-in timer can be adjusted up to a set time of 60 minutes and the thermostat- which is adjustable up to 230°C- gives the device the necessary options for a variety of dishes and recipes. After the set cooking time runs out, a beep lets you know that the work done.The easy-to-clean, stainless steel body of the Klarstein Omnichef 45C grill oven is equipped with non-slip feet, a stainless steel door handle and a large window made ??of safety glass, so your food is always in view. Everything is managed using the uncluttered control section, which has only three knobs with self-explanatory symbols.The accessories are just as extensive as the range of functions of the Klarstein Omnichef 45C oven. In addition to a grill rack, baking tray and spit, two brackets for easy removal also included in the delivery. heart
  • £  89.95 P & P: see site
    at OurTaps
    help COMBO SET: 1 WAY (1 OUTLET = 1 FUNCTION) CHROME THERMOSTATIC SHOWER MIXER VALVE, RECTANGULAR SHOWER HEAD AND CEILING MOUNTED ARM. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Valve is Wall-mounted and attaches to concealed pipework. The body and control knobs are solidly made of brass with a chrome finish. There is 1 outlet which is controlled by the upper knob. When installed it usually points upwards from the valve. This knob also controls the flow of water. Both the inlets and outlet are threaded male 1/2" BSP connections (3/4" diameter outside). The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degs C. The exposed 'mirror' chrome Front Plates (behind the control knobs) are some 75mm ('Thermo') & 80mm ('on/off') in diameter. The body of the Valve requires a minimum recess depth in the wall cavity of approx 6 cms. The distance between the centres of the control knobs is 10cms. The inlets are some 45mm centre to centre and have spring non-return valves inside. They are positioned as per the pictures of the valve on its own. As you look at the front of the valve, with the outlet pointing upwards, the cold inlet is on the right with the hot on the left. There are securing nuts on the body chambers to assist with installation. The recommended water pressure is between 1 and 5 bar and it will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. SHOWER HEAD: The Square Shower Head measures 8" X 8" (20 X 20cms). It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. It also has 'easy clean' rubber nozzles! SHOWER ARM: The matching Round style Chrome Shower Arm is ceiling-mounted and measures some 15cms (6") long. The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. heart
  • £  89.95 P & P: see site
    at OurTaps
    help COMBO SET: 1 WAY (1 OUTLET = 1 FUNCTION) CHROME THERMOSTATIC SHOWER MIXER VALVE, RECTANGULAR SHOWER HEAD AND CEILING ARM. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Valve is Wall-mounted and attaches to concealed pipework. The body and control knobs are solidly made of brass with a chrome finish. There is 1 outlet which is controlled by the upper knob. When installed it usually points upwards from the valve. This knob also controls the flow of water. Both the inlets and outlet are threaded male 1/2" BSP connections (3/4" diameter outside). The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degs C. The exposed 'mirror' chrome Front Plates (behind the control knobs) are some 75mm ('Thermo') & 80mm ('on/off') in diameter. The body of the Valve requires a minimum recess depth in the wall cavity of approx 6 cms. The distance between the centres of the control knobs is 10cms. The inlets are some 45mm centre to centre and have spring non-return valves inside. They are positioned as per the pictures of the valve on its own. As you look at the front of the valve, with the outlet pointing upwards, the cold inlet is on the right with the hot on the left. There are securing nuts on the body chambers to assist with installation. The recommended water pressure is between 1 and 5 bar and it will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. SHOWER HEAD: The Rectangular Shower Head measures 233mm X 142mm (approx 9" X 5.5"). It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. It also has 'easy clean' rubber nozzles! SHOWER ARM: The matching round style Chrome Shower Arm is Ceilingwall-mounted and measures some 15cms long (6"). The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET: 2 WAY (2 OUTLET = DUAL FUNCTION) CHROME THERMOSTATIC SHOWER MIXER VALVE, RAIN SHOWER HEAD AND ARM WITH HAND SHOWER/RAIL KIT. 1. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Diverter Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass with a chrome finish. The control knobs are also brass with a 'mirror' chrome finish. There are 2 functions ('outlets'), both controlled by the upper knob. This knob also controls the water flow and on/off. The two inlets (parallel in 6 o'clock position), and both outlets (3 and 9 o'clock) are 1/2" BSP threaded male ones (actually measuring 3/4" diameter outside). They are suitable for standard 'female couplings). The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degrees C. The exposed 'mirror-chrome' Front Plates (behind the control knobs) are approx 7 and 8cms in diameter. The body of the Valve requires a minimum recess depth of approx 7 cms. The distance between the centres of the control knobs is approx 10cms. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. SHOWER HEAD: The Rain or 'Drench' style Shower Head measures 7.5" / 19cms in diameter. It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. It also has 'easy clean' rubber nozzles! 3. SHOWER ARM: The matching Chrome Shower Arm is wall-mounted and measures some 35cms long and has a drop of approx 7cms at the curved end. The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. NB. It is possible to exchange the Wall-mounted shower arm for a Ceiling-mounted one (6"/15cms long made from brass/chrome). The price is the same, however please check availability first. 4. ADJUSTABLE SLIDING RAIL WITH HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The adjustable shower rail measures approx 58 cms in height. The rail itself is made of brass with a chrome finish. The ends are 'plastichrome', as are the sliding shower holder and soap dish. The Flexible Shower Hose is 1.5m long comes with, and connects to, a Pencil style Handheld Shower Head, all with a Chrome Finish. A solidly made Chrome Wall Outlet completes the Combo set and enables you to connect the Flexi hose to the concealed pipework. heart
  • £  658.80 P & P: £  0.00
    at shreddingmachines.co.uk
    help The Rexel RLS32 RLX20 and RLM11 are best value and most reliable high capacity Shredders available for use in a Large Office with a 115 Litre waste bin capable of holding 1000 sheets of Shredded paper. These machines are supplied with a wire frame to hold either a recycled paper or plastic waste sack. However a lower capacity freestanding bin is available as an optional extra - see below. The RLS32 RLX20 and RLM11 features High Performance Special Steel cutters which are durable for heavy duty use. The Shredders automatically activate reverse mode to clear any paper jam. The power saving mode activates automatically after 2 mins of non-use saving you money and is also good for the environment. All models are Finger safe for additional safety to UL60950 and feature an overheat protection mode where the thermostat detects when the shredder overheats and automatically goes into cools down mode for additional safety. Casters for easy manoeuvring. Ultra Quiet Running at under 55DB perfect for the busy office. The new Oiling System is now fitted to Lubricate Cutting Cylinders Automatically reducing downtime and durability. heart
  • £  954.00 P & P: £  0.00
    at shreddingmachines.co.uk
    help The Rexel RLS32 RLX20 and RLM11 are best value and most reliable high capacity Shredders available for use in a Large Office with a 115 Litre waste bin capable of holding 1000 sheets of Shredded paper. These machines are supplied with a wire frame to hold either a recycled paper or plastic waste sack. However a lower capacity freestanding bin is available as an optional extra - see below. The RLS32 RLX20 and RLM11 features High Performance Special Steel cutters which are durable for heavy duty use. The Shredders automatically activate reverse mode to clear any paper jam. The power saving mode activates automatically after 2 mins of non-use saving you money and is also good for the environment. All models are Finger safe for additional safety to UL60950 and feature an overheat protection mode where the thermostat detects when the shredder overheats and automatically goes into cools down mode for additional safety. Casters for easy manoeuvring. Ultra Quiet Running at under 55DB perfect for the busy office. The new Oiling System is now fitted to Lubricate Cutting Cylinders Automatically reducing downtime and durability. heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET: 2 WAY (2 OUTLET = DUAL FUNCTION) CHROME THERMOSTATIC SHOWER MIXER VALVE, STAR SHOWER HEAD AND ARM WITH HAND SHOWER/RAIL KIT. 1. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Diverter Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass with a chrome finish. The control knobs are also metal with a 'mirror' chrome finish. There are 2 functions ('outlets'), both controlled by the upper 'diverter' handle. This handle also controls the water flow and on/off/flow. The two inlets (parallel in 6 o'clock position), and both outlets (3 and 9 o'clock) are 1/2" BSP threaded male ones (actually measuring 3/4" diameter outside). They are suitable for standard 'female' couplings). The temperature is controlled Thermostatically, for comfort and safety, and there is an override stop switch set at 38 degrees C. The beautiful exposed 'mirror-like' Front Plates (behind the control knobs) are approx 7 & 8cms in diameter. The body of the Valve requires a minimum recess depth of approx 7cms. The distance between the centres of the control knobs is approx 10cms. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. SHOWER HEAD: The 'Star, Spider or Cloudburst' style Shower Head measures approx 7" / 18.5cms in diameter. It is solidly made of Brass with a polished Chrome finish, and there is also an adjustable swivel joint on top of it. Water emanates from the 'prongs' as well as the body! 3. SHOWER ARM: The matching Chrome Shower Arm is wall-mounted and measures some 35cms long and has a drop of approx 7cms at the curved end. The threaded ends are 1/2" BSP. It comes with a Chrome Cover plate and securing nut/washer. NB. It is possible to exchange the Wall-mounted shower arm for a Ceiling-mounted one (6"/15cms long made from brass/chrome). The price is the same, however please check availability first. 4. ADJUSTABLE SLIDING RAIL WITH HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The adjustable shower rail measures approx 58cms in height. The rail itself is made of brass with a chrome finish. The ends are 'plastichrome', as it the sliding shower holder and soap dish. The Flexible Shower Hose is 1.5m long comes with, and connects to, a Pencil style Handheld Shower Head, all with a Chrome Finish. A solidly made Chrome Wall Outlet completes the Combo set and enables you to connect the Flexi hose to the concealed pipework. heart
  • £  39.99 P & P: £  4.99
    at alanadladl
    heart
  • £  10.00 P & P: £  4.00
    at mabeecroft
    heart
  • £  3.99 P & P: £  0.00
    at draytonrepairs
    help GENUINE REPLACEMENT PART - FREE DIY FITTING GUIDE + P&P heart
  • £  59.99 P & P: £  0.00
    at brettyboy75
    heart
  • £  11.50 P & P: £  3.99
    at alanadladl
    heart
  • £  30.00 P & P: £  0.00
    at 0191*wales
    heart
  • £  3.99 P & P: £  0.00
    at alanadladl
    heart
  • £  23.99 P & P: £  0.00
    at classic-oldie
    heart
  • £  76.00 P & P: £  0.00
    at watertight-grp
    heart
  • £  120.00 P & P: £  7.75
    at electrafux
    heart
  • £  49.00 P & P: £  3.20
    at sophilore
    heart
  • £  54.99 P & P: £  6.00
    at tankstars
    heart
  • £  50.00 P & P: £  0.00
    at captinnorth
    heart
  • £  25.00 P & P: £  0.00
    at pwh7
    heart
  • £  29.99 P & P: £  4.99
    at alanadladl
    heart
  • £  4.99 P & P: £  5.00
    at killbean1
    heart
  • £  34.99 P & P: £  0.00
    at smukpk
    heart
  • £  21.00 P & P: £  3.20
    at thebeatnicks
    heart
  • £  109.99 P & P: £  0.00
    at date-66
    heart
  • £  34.01 P & P: £  3.20
    at chopper2000uk
    heart
  • £  90.00 P & P: £  4.18
    at Amazon Marketplace
    help •User adjustable Set-back feature - at the push of a button •User adjustable Min/Max temperature setting •Digital Display situated above dial is easy to read Drayton's stylish Digistat+ RF with tactile, audible & visual feedback. Benefits of Wireless Systems The Digistat+ Wireless System provides a cost heart
  • £  95.95 P & P: £  0.00
    at Amazon UK
    help Drayton Digistat + RF Wireless Room Thermostat - Drayton Wireless Central Heating Controls Drayton Digistat + Wireless Room Thermostat at PlumbNation is a stylish Drayton RF Room stat with tactile, audible & visual feedback. The Drayton Digistat + Room Thermostat Features the familiar dial control with a heart
  • £  49.99 P & P: see site
    at Amazon
    help Drayrton digistate +3 (22083); 7 DAY OR 5/2 DAY; FREE TECHNICAL SUPPORT heart
  • £  85.99 P & P: see site
    at Amazon
    heart
  • £  59.90 P & P: see site
    at Amazon
    help User adjustable Set-back feature - at the push of a button; User adjustable Min/Max temperature setting; Drayton's stylish Digistat+ RF with tactile, audible & visual feedback; Digital display to show that the temperature has been set accurately every time heart
  • £  50.71 P & P: see site
    at Amazon
    help Easy to use and install; 3 pre-defined programmes; Automatic summer/winter time change; Memory Saver; Large clear display heart
  • £  181.00 P & P: see site
    at Amazon
    heart
  • £  70.00 P & P: see site
    at Amazon
    help Easy to use; Large Clear Display; Reduced Wiring Cost; Flexible Thermostat Siting; Part L Compliant (Part J in Scotland) heart
  • £  127.95 P & P: see site
    at Amazon
    help Drayton; RF700 Drayton heart
  • £  59.95 P & P: see site
    at Amazon
    heart
  • £  49.75 P & P: see site
    at Amazon
    heart
  • £  84.90 P & P: see site
    at Amazon
    heart
  • £  169.50 P & P: see site
    at Amazon
    heart
  • £  100.78 P & P: see site
    at Amazon
    help Digital Display; 2; 4 or 6 On/Off Periods per Day; 3 Pre-Set Programmes; Frost Protection heart
  • £  104.38 P & P: see site
    at Amazon
    help Digital Display; 2; 4 or 6 On/Off Periods per Day; 3 Pre-Set Programmes; M-BulletFrost Protection/M-Bullet heart
  • £  64.78 P & P: see site
    at Amazon
    help Digital Display; 2-Wire Installation heart

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on digistat thermostat

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.