Results for "curtains wigan"

Filter by:

  • £  1.57 P & P: £  9.99
    at Zoofast.co.uk
    help versatile application as the drive of a fountain, filter, cascade, or a UV lamp low power consumption a highly functional fixing base The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation:AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty.Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically.Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum.The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 C.Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cartridge rinsing depends on the degree of water pollution and should be performed when a noticeable decrease in performance is observed.AQUAJET PFN pumps are manufactured in conformity with the currently binding safety standards. The pump should only be connected to the mains via a protected plug-in socket. The plug-in socket must be located in a dry place. Before performing any maintenance works (e.g. assembly or cleaning), pull the plug out of the mains socket. Additional accessories:AQUAEL offers additional accessories that can be used to extend the functionality of AQUAJET PFN pumps: for AQUAJET PFN 3500 sets of KR-3 fountain nozzles for AQUAJET PFN 5500, 7500, 10000 sets of KR-MAX fountain nozzles heart
  • £  69.00 P & P: see site
    at Trouva
    help Cotton lined starburst curtain panel by Indigo & Wills. Blue heart
  • £  1.22 P & P: £  9.99
    at Zoofast.co.uk
    help versatile application as the drive of a fountain, filter, cascade, or a UV lamp low power consumption a highly functional fixing base The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation:AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty.Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically.Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum.The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 C.Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cartridge rinsing depends on the degree of water pollution and should be performed when a noticeable decrease in performance is observed.AQUAJET PFN pumps are manufactured in conformity with the currently binding safety standards. The pump should only be connected to the mains via a protected plug-in socket. The plug-in socket must be located in a dry place. Before performing any maintenance works (e.g. assembly or cleaning), pull the plug out of the mains socket. Additional accessories:AQUAEL offers additional accessories that can be used to extend the functionality of AQUAJET PFN pumps: for AQUAJET PFN 3500 sets of KR-3 fountain nozzles for AQUAJET PFN 5500, 7500, 10000 sets of KR-MAX fountain nozzles heart
  • £  49.00 P & P: see site
    at Trouva
    help Cotton Casablanca grey voile curtain panel by Indigo & Wills. heart
  • £  2.41 P & P: £  9.99
    at Zoofast.co.uk
    help versatile application as the drive of a fountain, filter, cascade, or a UV lamp low power consumption a highly functional fixing base The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation:AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty.Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically.Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum.The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 C.Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cartridge rinsing depends on the degree of water pollution and should be performed when a noticeable decrease in performance is observed.AQUAJET PFN pumps are manufactured in conformity with the currently binding safety standards. The pump should only be connected to the mains via a protected plug-in socket. The plug-in socket must be located in a dry place. Before performing any maintenance works (e.g. assembly or cleaning), pull the plug out of the mains socket. Additional accessories:AQUAEL offers additional accessories that can be used to extend the functionality of AQUAJET PFN pumps: for AQUAJET PFN 3500 sets of KR-3 fountain nozzles for AQUAJET PFN 5500, 7500, 10000 sets of KR-MAX fountain nozzles heart
  • £  49.00 P & P: see site
    at Trouva
    help Cotton Casablanca lime voile curtain panel by Indigo & Wills. Green heart
  • £  1.94 P & P: £  9.99
    at Zoofast.co.uk
    help versatile application as the drive of a fountain, filter, cascade, or a UV lamp low power consumption a highly functional fixing base The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation:AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty.Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically.Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum.The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 C.Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cartridge rinsing depends on the degree of water pollution and should be performed when a noticeable decrease in performance is observed.AQUAJET PFN pumps are manufactured in conformity with the currently binding safety standards. The pump should only be connected to the mains via a protected plug-in socket. The plug-in socket must be located in a dry place. Before performing any maintenance works (e.g. assembly or cleaning), pull the plug out of the mains socket. Additional accessories:AQUAEL offers additional accessories that can be used to extend the functionality of AQUAJET PFN pumps: for AQUAJET PFN 3500 sets of KR-3 fountain nozzles for AQUAJET PFN 5500, 7500, 10000 sets of KR-MAX fountain nozzles heart
  • £  49.00 P & P: see site
    at Trouva
    help Cotton Tangier lime voile curtain panel by Indigo & Wills. Green heart
  • £  0.90 P & P: £  9.99
    at Zoofast.co.uk
    help versatile application as the drive of a fountain, filter, cascade, or a UV lamp low power consumption a highly functional fixing base The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation:AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty.Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically.Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum.The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 C.Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cartridge rinsing depends on the degree of water pollution and should be performed when a noticeable decrease in performance is observed.AQUAJET PFN pumps are manufactured in conformity with the currently binding safety standards. The pump should only be connected to the mains via a protected plug-in socket. The plug-in socket must be located in a dry place. Before performing any maintenance works (e.g. assembly or cleaning), pull the plug out of the mains socket. Additional accessories:AQUAEL offers additional accessories that can be used to extend the functionality of AQUAJET PFN pumps: for AQUAJET PFN 3500 sets of KR-3 fountain nozzles for AQUAJET PFN 5500, 7500, 10000 sets of KR-MAX fountain nozzles heart
  • £  49.00 P & P: see site
    at Trouva
    help Cotton Tangier grey voile curtain panel by Indigo & Wills. heart
  • £  3.31 P & P: £  9.99
    at Zoofast.co.uk
    help versatile application as the drive of a fountain, filter, cascade, or a UV lamp low power consumption a highly functional fixing base The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation:AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty.Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically.Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum.The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 C.Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cartridge rinsing depends on the degree of water pollution and should be performed when a noticeable decrease in performance is observed.AQUAJET PFN pumps are manufactured in conformity with the currently binding safety standards. The pump should only be connected to the mains via a protected plug-in socket. The plug-in socket must be located in a dry place. Before performing any maintenance works (e.g. assembly or cleaning), pull the plug out of the mains socket. Additional accessories:AQUAEL offers additional accessories that can be used to extend the functionality of AQUAJET PFN pumps: for AQUAJET PFN 3500 sets of KR-3 fountain nozzles for AQUAJET PFN 5500, 7500, 10000 sets of KR-MAX fountain nozzles heart
  • £  140.00 P & P: £  0.00
    at House of Fraser
    help Create a sense of luxury and indulgence with the stunning Iliana curtains. Made from sumptuous, soft velvet this curtain ouzes glamour and style. Light shimmers across the beautiful panels of opulent velvet. 100% Polyester face, 50% cotton 50%... Silver heart
  • £  140.00 P & P: £  0.00
    at House of Fraser
    help Create a sense of luxury and indulgence with the stunning Iliana curtains. Made from sumptuous, soft velvet this curtain ouzes glamour and style. Light shimmers across the beautiful panels of opulent velvet. 100% Polyester face, 50% cotton 50%... Black heart
  • £  100.00 P & P: £  0.00
    at House of Fraser
    help Sizes: OTHER Create a sense of luxury and indulgence with the stunning Iliana curtains. Made from sumptuous, soft velvet this curtain ouzes glamour and style. Light shimmers across the beautiful panels of opulent velvet. 100% Polyester face, 50% cotton... heart
  • £  100.00 P & P: £  0.00
    at House of Fraser
    help Sizes: OTHER Create a sense of luxury and indulgence with the stunning Iliana curtains from Kylie in Black. Made from sumptuous, soft velvet this curtain style ouzes glamour. Perfect for any room needing statement luxury.100% Polyester face, 50% cotton... heart
  • £  140.00 P & P: £  0.00
    at House of Fraser
    help Create a sense of luxury and indulgence with the stunning Iliana curtains. Made from sumptuous, soft velvet this curtain ouzes glamour and style. Light shimmers across the beautiful panels of opulent velvet. 100% Polyester face, 50% cotton 50%... heart
  • £  56.00 P & P: £  0.00
    at House of Fraser
    help Willow Tree is a modern interpretation of a willow pattern toile. The simplicity of the design gives it a tranquil feel. Printed on crisp cotton, the duvet cover reverse and housewife pillowcase feature a two tone horizontal stripe inspired by Japanese... Blue heart
  • £  80.00 P & P: £  0.00
    at House of Fraser
    help Botanica is based on a design for printed cotton by William Kilburn (1745 1818) from the Kilburn Album, one of the Victoria and Albert Museum s most treasured possessions. The bedlinen features a profusion of beautifully drawn meadow flowers... heart
  • £  80.00 P & P: £  0.00
    at House of Fraser
    help Oriental Peony features an exotic print of colourful hummingbirds darting between leafy bamboo stems and lush peonies. Inspired by a 1920s furnishing fabric, the design reverses to an eye catching zigzag c0-ordinate print in moody berry tones. Add... heart
  • £  230.00 P & P: £  0.00
    at House of Fraser
    help Inspired by tribal collage designs and mark-making techniques, Akello makes a subtle style statement. Featuring a soft colour palette of crimson and linen across a naïve graphic print in a luxurious jacquard twill. The bedlinen is accompanied by a... heart
  • £  65.00 P & P: £  0.00
    at House of Fraser
    help Dive into a deep sleep with this all-over submarine design single duvet cover with horizontal stripes on the reverse, complete with matching Oxford pillowcase plus co-ordinating housewife vertical stripe design pillowcases. Remember it can be cold down... Red Cotton heart
  • £  114.00 P & P: £  0.00
    at House of Fraser
    help Mixing geometric tribal patterns with a charcoal colour palette, Soto is the trend-led design for this summer with stylish Aztec prints. A graphic zig zag throw featuring a contrast red & black border adds an earthy tone to the collection.Tape top... Cotton heart
  • £  45.00 P & P: £  3.95
    at House of Fraser
    help Roxy is a classic stripe, straight laced with a quirky diagonal geo diamond design on the reverse available in two colour-ways, denim and citrus. Mix and match with Eva accessories.Tape top curtainsMachine Wash 40°CCotton/Polyester Shop At House Of Fraser heart
  • £  65.00 P & P: £  0.00
    at House of Fraser
    help Switch off the lights and let the entire zoo come out to play with this fabulous single duvet cover and pillow case adorned with almost every animal imaginable plus a wiggly stripe on the reverse. Striped housewife pillowcases are available as a... Cotton heart
  • £  190.00 P & P: £  0.00
    at House of Fraser
    help Inspired by tribal collage designs and mark-making techniques, Akello makes a subtle style statement. Featuring a soft colour palette of crimson and linen across a naïve graphic print in a luxurious jacquard twill. The bedlinen is accompanied by a... heart
  • £  136.50 P & P: £  0.00
    at House of Fraser
    help In warm, dusky shades of amethyst, the opulent cotton jacquard of Chera is complemented by a finely drawn and richly intricate pattern based on an original Indian artwork. A grand paisley damask co-ordinates strikingly with an embroidered linen cushion... heart
  • £  170.00 P & P: £  0.00
    at House of Fraser
    help Trips to the Portobello Road and Alfies Antique Market inspired our design team to create this bold 60 s style retro weave, featuring curved floral motifs in two vibrant colourways, Berry and Primrose. On the reverse you will find a co-ordinating plain... heart
  • £  130.00 P & P: £  0.00
    at House of Fraser
    help Oska is a contemporary take on a classic Danish design, featuring a retro floral print in bold shades of red and blue and a coordinating knit throw. Team with the raised spot cushion for a modern bedlinen design with mid-century flair. Tape top... Cotton heart
  • £  80.00 P & P: £  0.00
    at House of Fraser
    help Anna Maria Garthwaite (1690 1763), was one of the leading pattern drawers in the English silk industry, producing as many as 80 commissioned designs a year. Her talent for depicting the natural form was characterised in all of her work and is perfectly... Grey heart
  • £  80.00 P & P: £  0.00
    at House of Fraser
    help Botanica is based on a design for printed cotton by William Kilburn (1745 1818) from the Kilburn Album, one of the Victoria and Albert Museum s most treasured possessions. The bedlinen features a profusion of beautifully drawn meadow flowers... heart
  • £  195.00 P & P: £  0.00
    at House of Fraser
    help Lavish and opulent, Kendari features a finely woven jacquard in soft grey and a luxuriously decadent pattern reminiscent of Balinese wood carving. The bedlinen is accentuated by an elaborately bordered flat sheet which invigorates the colour scheme... heart
  • £  65.00 P & P: £  0.00
    at House of Fraser
    help Drift off to sleep in a bed of retro flowers with this all-over floral single or double duvet set with a dot design on the reverse. Three flowers adorn the co-ordinating Oxford pillowcase and accessorise with additional housewife pillowcases featuring... Motif heart
  • £  45.00 P & P: £  3.95
    at House of Fraser
    help The classic floral and branch design repeats all over in soft foxglove purple. This sophisticated design has a ditsy abstract floral reverse. Mix and match with Polly accessories.Tape top curtainsMachine Wash 40°CCotton/Polyester Shop At House Of Fraser heart
  • £  45.00 P & P: £  3.95
    at House of Fraser
    help Polly is an all over quirky flower pot design with pops of purple and chartreuse with a soft floral reverse and complimenting leaf design printed panel housewife. Mix and match with Sally accessories.Tape top curtainsMachine Wash 40°CCotton/Polyester... heart
  • £  45.00 P & P: £  3.95
    at House of Fraser
    help Tilly is the free spirit of the collection with an all over bird on foliage design. The reverse has a cutesy illustrated floral design in chartreuse, coral and duck egg blue. Mix and match with Belle accessoriesTape top curtainsMachine Wash... Cotton heart
  • £  45.00 P & P: £  3.95
    at House of Fraser
    help An all over retro floral design which makes a bold ` flower power ` statement in pink, chartreuse and turquoise. The contrasting polka dot reverse in tangy citrus green ensure this quirky 60`s design brings fun to your bedroom décor. Mix and match with... Cotton heart
  • £  1.57 P & P: £  9.99
    at Zoofast.co.uk
    help versatile application as the drive of a fountain, filter, cascade, or a UV lamp low power consumption a highly functional fixing base The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation:AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty.Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically.Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum.The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 C.Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cartridge rinsing depends on the degree of water pollution and should be performed when a noticeable decrease in performance is observed.AQUAJET PFN pumps are manufactured in conformity with the currently binding safety standards. The pump should only be connected to the mains via a protected plug-in socket. The plug-in socket must be located in a dry place. Before performing any maintenance works (e.g. assembly or cleaning), pull the plug out of the mains socket. Additional accessories:AQUAEL offers additional accessories that can be used to extend the functionality of AQUAJET PFN pumps: for AQUAJET PFN 3500 sets of KR-3 fountain nozzles for AQUAJET PFN 5500, 7500, 10000 sets of KR-MAX fountain nozzles heart
  • £  69.00 P & P: see site
    at Trouva
    help Cotton lined starburst curtain panel by Indigo & Wills. Blue heart
  • £  1.22 P & P: £  9.99
    at Zoofast.co.uk
    help versatile application as the drive of a fountain, filter, cascade, or a UV lamp low power consumption a highly functional fixing base The high-capacity garden pumps AQUAJET PFN 3500, 5500, 7500 and 10000 are designed to pump water in garden ponds and ornamental ponds, fountains, cascades, and backyard swimming pools. They can also be used for other purposes, such as gardening, household works, agriculture, animal and fish farming, construction, etc. The pumps can operate in salt water. Mode of operation:AQUAJET PFN pumps are driven by waterproof, low-maintenance synchronous motors. The ceramic rotor axis virtually does not wear, which guarantees a long life cycle of the pump. As a result of the use of ceramic rotor axes in AQUAJET PFN pumps, they are distinguished by exceptionally quiet operation. A big pre-filter protects the rotor against pollution As a result, the pumps do not require frequent cleaning. Thanks to the simple design, their maintenance will not cause any difficulty.Note that although the pump may be fully submerged in the water or placed outside the water reservoir, it must always be positioned below the water level. In the event of rotor stoppage, inlet or outlet obstruction due to pollution, or dry running, the thermal switch installed in the pump will disconnect it from the mains until it cools. The pump will be switched back on automatically.Despite its relatively small size, the pump ensures a high pump capacity and water head. This is due to the application of modern energy-efficient motors and high-quality gaskets under the rotor chamber, which reduce yield losses to a minimum.The pump can be used in swimming pools, provided that there is nobody in the water. AQUAJET PFN pumps can only be used for liquids whose temperature does not exceed 35 C.Cleaning the rotor slot once a month is sufficient. To prevent a drop in performance, clean the filter cartridge, rinsing it in water taken from the pond. It is important to use the pond water, as it does not destroy the bacterial flora in the sponge, thus maintaining the efficiency of biological filtration. The frequency of cartridge rinsing depends on the degree of water pollution and should be performed when a noticeable decrease in performance is observed.AQUAJET PFN pumps are manufactured in conformity with the currently binding safety standards. The pump should only be connected to the mains via a protected plug-in socket. The plug-in socket must be located in a dry place. Before performing any maintenance works (e.g. assembly or cleaning), pull the plug out of the mains socket. Additional accessories:AQUAEL offers additional accessories that can be used to extend the functionality of AQUAJET PFN pumps: for AQUAJET PFN 3500 sets of KR-3 fountain nozzles for AQUAJET PFN 5500, 7500, 10000 sets of KR-MAX fountain nozzles heart
  • £  49.00 P & P: see site
    at Trouva
    help Cotton Casablanca grey voile curtain panel by Indigo & Wills. heart
Page: 1 2 3 4 5 6 7 8 9 10 NEXT

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on curtains wigan

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.