Results for "shower screen bracket"

Filter by:

  • £  103.00 P & P: see site
    at Amazon
    help Curved bath screen designed to fit 'P' shaped shower baths; Dimensions: 840mm-curve of glass, Depth of Curve Approx. 120mm; Prevent splashes and spills from the shower; Reversible - suitable for left hand and right hand 'P' shaped baths; Hinged for easy access, storage and cleaning heart
  • £  18.49 P & P: £  0.00
    at eBay.co.uk
    help shower bath screen chromed corner wall tie bar we all need some support get some for your shower glass or over bath screen designed originally for the tc and bathrooms 4 all over bath screens and 6 mm shower side panels this premium quality corner wall tie bar is made from heavily chromed brass and is suitable for use on shower bath screens with 6 mm thick glass the bracket for the glass features plastic capped screws to hold the glass in place the bracket can be installed at any angle relative heart
  • £  18.50 P & P: see site
    at OurTaps
    help Wall-mounted Shower Head/Hose Adjustable Holder/Bracket. The main body section measures some 80mm in length and the body is some 32mm in diameter. The side section protrudes some 36mm. The side section swivels so you can adjust the angle of the shower head. It holds a standard sized shower head/hose which have 1/2" BSP connections. The 'hole' tapers down from 22mm to 20mm to ensure a snug fit! It comes with fixings. heart
  • £  166.90 P & P: see site
    at Amazon
    help Modern wet room screen with 8mm safety glass; Dimensions: (Height): 1850mm; Adjustable screen with choice of sizes; Please note: Shower Tower and waste not included in price; Ideal for modern bathrooms heart
  • £  4.00 P & P: see site
    at OurTaps
    help Wall-mounted Shower Head/Hose Adjustable Bracket. The body measures some 7.5 x 5 cms where it joins the wall. The holder pivots vertically and it is frinished in Chrome. It comes with fixings. heart
  • £  305.32 P & P: see site
    at Amazon
    help 8mm Thick Safety Glass - 1850mm x 1200mm; 1700mm Rectangular Shower Tray - Choice of Widths; Modern profile (only 40mm depth), for easy access; Hi-Flow Shower Tray Waste Included (capable of disposing of 58 litres per minute); Screen adjustable: minimum size 1175mm maximum 1200mm heart
  • £  49.95 P & P: see site
    at OurTaps
    help MINI VERTICAL EXPOSED 'TORPEDO' STYLE THERMOSTATIC SHOWER BAR VALVE WITH 1/2" BSP OUTLET & HAND SHOWER SET. IT IS SUITABLE FOR A CARAVAN, MOTORHOME, MOBILE HOME, ETC. Specification & Features: 1. SHOWER VALVE: This 'Torpedo' style Thermostatic Mixer Bar Valve is 'Exposed' and Wall-mounted requiring exposed inlet feeds. The body is solidly made of brass and finished in polished Chrome. The minimum operating pressure is 0.25 bar, although it is recommended operate between 1 to 5 bars. One knob controls the water flow. The other knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. The Valve measures some 4.8 cms wide, it's body is 4cms deep and 20cms long. The distance between the inlet centres is approx 72mm. It comes with a wall-mounting kit & fixings. The wall mounting screws into the side of the valve body and the plate section is screwed to a wall. The inlets are 1/2" BSP size male (would suit standard female couplings with 15mm 'olive' joints on the other end). The Outlet, usually for a Flexi hose, has a 1/2" BSP male threaded connection (measures 3/4" diameter outside). This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. HAND SHOWER SET: In addition to the Shower valve, this includes a 1.5m Chrome/metal Flexible Hose and Chrome Handheld Shower Head which has 3 spray positions and rubber nozzles for easy cleaning. There is also a fixed wall mounted bracket/holder which pivots in 'plastichrome'. We can swap the shower head for a round slimlime 'pencil' style handheld head if you prefer (approx 20 cms long and 3 cms in diameter). Simply make your purchase and add a note. The price is the same. heart
  • £  65.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER MIXER WITH HAND SHOWER SET AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. Included with this is a Chrome Handheld Shower Head (3 spray positions, 'plastichrome'), a 1.5m Flexible hose and a wall-mounted bracket ('plastichrome') for the shower head. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  56.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Deck-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes a pair of Deck-mounting legs ('pillars') and 2 washers. The distance between the inlet centres where the legs fit onto the bath is the UK standard 18cms (180mm). From the tip of the spout to rear of the legs is some 19 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  84.95 P & P: see site
    at OurTaps
    help Modern style Deck-mounted/Pillar Bath/Shower Mixer Taps with Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. These taps use 1/4 Turn Ceramic Disc Technology. The Taps come with a slimline 'Pencil' Handheld Head (plastichrome) & Flexible Hose. The spout swivels and has a mesh filter for smoother water flow. There is a 'diverter' lever on the lower central section of the body so you can switch the water between the spout and the shower hose. The required minimum water pressure is 0.5 bar, although 1+ bars is recommended (max 5 bars). The distance between the inlet centres is the UK standard 18 cms (180mm). The Tap handles are some 130mm high. The overall height is some 29 cms and centre of the tip of the spout is approx 15 cms from the centre of the body. The metal flexi hose measures 1.5 metres and there is a fixed wall mounted bracket (plastichrome) for the 'Pencil' shower head. The threaded base sections are approx 48mm long and are 3/4" BSP size (measure 1" diameter outside). Securing nuts/washers are supplied. heart
  • £  45.00 P & P: see site
    at John Lewis
    help Shop for John Lewis Splash Guard Shower Screen at John Lewis. Find a wide range of Home, Fashion and Electrical products at John Lewis with Free Delivery on order over £50. heart
  • £  53.78 P & P: £  10.28
    at Lightinthebox
    help External Memory:Up to 32GB/SD Card; Features:SD/USB Support,Touch Screen,FM Transmitter,Games,iPod,GPS; Digital TV or Analog TV:No TV Function; Screen Size:7 inch; OSD Languages:Polish,Russian,Portuguese,Italian,Spanish,German,Swedish,French,Dutch,English,Vietnamese,Japanese,Chinese; Media Type:PDF,MOV,BMP,Mp4,GIF,WMA,JPG,Mp3,ASX,MPEG4,FLV,AVI,3GP,WAV,MKV,WMV,ASF; Operating System:Windows CE 6.0; GPS Processor:Sirf Star III; GPS Card Slot:TF Card; Support Map:Gate5,Sygic,Garmin,TOMTOM,Route66; Connector Type:1 x USB,1 x A/V IN; Type:GPS Navigator; Color:Black; Dimensions / WxLxH(mm):W110mm x L175MM x H10mm; Net Weight(kg):0.257; What's in the box:Car charger,Mounting bracket,USB cable,User's manual,DVD host heart
  • £  48.00 P & P: see site
    at OurTaps
    help QUALITY BATH / SHOWER 'WALL-MOUNTED' MIXER TAPS WITH HAND SHOWER SET. Specification & Features: Modern style Wall-mounted Bath / Shower Mixer Taps which use 1/4 Turn Ceramic Disc Technology. They come with a Hand Shower set with '3 position' Handheld Head, Flexible Hose and Wall bracket/holder. The body of the taps is solidly made of brass and finished with highly polished Chrome. The 'Cross' style handles are Zinc Alloy. The spout swivels and has a mesh filter for smoother water flow. There is a 'diverter' lever on the front of the body so you can switch the water between the spout and the shower hose. The recommended minimum water pressure is 0.5 bar, although 1 bar is preferable. The distance between the inlet centres is 15 cms (150mm). The overall height is approx 26 cms. The spout is approx 21 cms high (from the taps body) and has a reach of around 22 cms from the centre of the inlet holes. The Taps come with a wall-mounting kit which includes 2 x 'S Tails', 2 x chrome cover plates and 2 x rubber washers. The hose measures 1.5 metres and there is a fixed wall mounted bracket for the handheld shower head. heart
  • £  39.00 P & P: see site
    at OurTaps
    help QUALITY BATH / SHOWER 'WALL-MOUNTED' MIXER TAPS WITH HAND SHOWER SET. Specification & Features: Modern style Wall-mounted Bath / Shower Mixer Taps which use 1/4 Turn Ceramic Disc Technology. They come with a Hand Shower set with '3 position' Handheld Head, Flexible Hose and Wall bracket/holder. The body of the taps is solidly made of brass and finished with highly polished Chrome. The 'Cross' style handles are Zinc Alloy. The spout swivels and has a mesh filter for smoother water flow. There is a 'diverter' lever on the front of the body so you can switch the water between the spout and the shower hose. The recommended minimum water pressure is 0.5 bar, although 1 bar is preferable. The distance between the inlet centres is 15 cms (150mm). The overall height is approx 26 cms. The spout is approx 21 cms high (from the taps body) and has a reach of around 22 cms from the centre of the inlet holes. The Taps come with a wall-mounting kit which includes 2 x 'S Tails', 2 x chrome cover plates and 2 x rubber washers. The hose measures 1.5 metres and there is a fixed wall mounted bracket for the handheld shower head. heart
  • £  119.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION ROUND STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 7"/18.5cms diameter Star 'Cloudburst' Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top. Water emanates from the centre as well as the 'prongs'. In addition there is a flexible 1.5 metre shower hose with separate round style multi-spray function Handheld Head ('plastichrome') which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  75.00 P & P: see site
    at John Lewis
    help Shop for John Lewis Framed Shower Screen at John Lewis. Find a wide range of Home, Fashion and Electrical products at John Lewis with Free Delivery on order over £50. heart
  • £  119.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION ROUND STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 8"/20cms diameter Round 'Slimline style' Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top and rubber nozzles for easy cleaning. In addition there is a flexible 1.5 metre shower hose with separate Multi-spray function Handheld Head ('plastichrome') which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  105.00 P & P: see site
    at John Lewis
    help Shop for John Lewis Aquarius Half Framed Sail Shower Screen at John Lewis. Find a wide range of Home, Fashion and Electrical products at John Lewis with Free Delivery on order over £50. heart
  • £  119.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION ROUND STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 8"/20cms diameter Round 'Slimline style' Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top and rubber nozzles for easy cleaning. In addition there is a flexible 1.5 metre shower hose with separate round 'pencil' style Handheld Head (lightweight brass with a Chrome finish) which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  135.00 P & P: see site
    at John Lewis
    help Shop for John Lewis Splash Guard Shower Screen with Rail at John Lewis. Find a wide range of Home, Fashion and Electrical products at John Lewis with Free Delivery on order over £50. heart
  • £  124.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION SQUARE STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 8"/20cms Square 'Slimline style' Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top and rubber nozzles for easy cleaning. In addition there is a flexible 1.5 metre shower hose with separate square 'flat' style Handheld 'Pencil' Head (Brass with a Chrome finish) which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  95.00 P & P: see site
    at John Lewis
    help Shop for John Lewis Euroguard Half Frame Shower Screen at John Lewis. Find a wide range of Home, Fashion and Electrical products at John Lewis with Free Delivery on order over £50. heart
  • £  240.00 P & P: see site
    at John Lewis
    help Shop for John Lewis Elite Sail Shower Screen with Towel Rail at John Lewis. Find a wide range of Home, Fashion and Electrical products at John Lewis with Free Delivery on order over £50. heart
  • £  124.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION SQUARE STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 195mm X 195mm (approx 7.5" X 7.5") Square Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top and rubber nozzles for easy cleaning. In addition there is a flexible 1.5 metre shower hose with separate square 'flat' style Handheld 'Pencil' Head (Brass with a Chrome finish) which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  86.00 P & P: see site
    at John Lewis
    help This contemporary handshower comes complete with hose and fixed wall bracket. It's the perfect addition to your shower making it more versatile. It has a metal and ABS construction and boasts a single spray pattern showerhead. The smoothflex shower hose offers stylish durability. heart
  • £  119.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION ROUND STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 7.5"/19cms diameter Round Rain Shower Head/Rose. The Shower Head is solidly made from Brass and has a swivel joint on top and rubber nozzles for easy cleaning. In addition there is a flexible 1.5 metre shower hose with separate Multi-spray function Handheld Head ('plastichrome') which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  119.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION ROUND STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 7.5"/19cms diameter Round Rain Shower Head/Rose. The Shower Head is solidly made from Brass and has a swivel joint on top and rubber nozzles for easy cleaning. In addition there is a flexible 1.5 metre shower hose with separate round 'pencil' style Handheld Head (lightweight brass with a Chrome finish) which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  119.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION ROUND STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome 7"/18.5cms diameter Star 'Cloudburst' Shower Head. The Shower Head is solidly made from Brass and has a swivel joint on top. Water emanates from the centre as well as the 'prongs'. In addition there is a flexible 1.5 metre shower hose with separate round 'pencil' style Handheld Head (lightweight brass with a Chrome finish) which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  124.95 P & P: see site
    at OurTaps
    help QUALITY EXPOSED DUAL FUNCTION SQUARE STYLE THERMOSTATIC SHOWER SET: 1. Valve Specification & Features: This 'Torpedo' style Thermostatic Mixer Valve 'bar' is Wall-mounted. The body is solidly made of brass and finished in polished Chrome. The control handles are 'plastichrome'. The minimum operating water pressures for hot and cold are 0.5 bar, although it is recommended operate between 1 to 5 bars of water pressure (unless a flow reducer is fitted). NB: To achieve 0.5 bars of water pressure with a gravity tank system you need a height drop of 5 metres. The left knob controls the water flow (as you look at the front of the valve) using a ceramic disc cartridge. The right knob controls the temperature thermostatically, for comfort and safety. There is an override stop switch set at 38 degrees C. Replacement thermostatic cartridges are also available if ever needed. The Valve measures some 28.5cms wide, it's body is 4cms high and 5.5cms deep. The distance between the inlet centres is the UK standard 150mm/15cms. It comes with wall-mounting connections ('S' Tail Connectors and Chrome cover plates). Easy fit and wall-plate fixings are sold separately if required. The Outlet on top has a 3/4" BSP connection for the Riser pipe. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. 2. Riser Shower Set: The Contemporary 'Exposed' Shower Riser pipework is in two pieces with an adjustable fixing bracket that if fixed to the wall by screws/plugs. The riser is solidly made from Brass with a polished Chrome Finish. It comes with a matching Chrome Rectangular Shower Head that measures some 233mm X 142mm (approx 9" X 5.5"). The Shower Head is solidly made from Brass and has a swivel joint on top and rubber nozzles for easy cleaning. In addition there is a flexible 1.5 metre shower hose with separate square 'flat' style Handheld 'Pencil' Head (Brass with a Chrome finish) which has its own sliding adjustable 'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve positioned just above the Valve which allows you to switch water between the 2 shower functions. The entire Shower Measures approx. 1.3 metre tall and the Arm extends out some 32cms from the centre of the Riser Rail to the centre of the main Shower Head. heart
  • £  290.00 P & P: see site
    at John Lewis
    help These stylish bath shower mixer taps have metal construction throughout and a quarter turn handle action for precise flow control. An antisplash spout is supplied as standard and a showerhead bracket is included. The taps boast solid and functional European design styling. heart
  • £  46.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Again, see accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  129.90 P & P: £  0.00
    at HiFi-Tower
    help Perfect HDTV Quality Projector ScreenThis high quality matte screen is coated with premium white vinyl and thanks to an extremely low gain factor (1.0) is excellently suited for a true home cinema experience. Unlike conventional materials, the vinyl coating of the screen is optimized so that the image remains sharp, clear and brilliant, not blurred or dim, even from extreme viewing angles.This eliminates the hassle of dragging furniture around and cramming everybody onto the sofa - friends and family can take their favourite seats and enjoy a quality image without compromise.Easy installation and operation: The strong, tensioned bracket means the screen is easy to attach to any wall or ceiling:Simply mount the bracket, hang the screen and lock in place - it doesn't get any easier. After use, simply roll up or completely remove and store away. The ideal solution for small and medium-sized rooms.Tips for selecting a canvas Which canvas is best for your needs? 2 factors are critical - the gain factor and the screen materialThe ideal gain factorThe gain factor is a measure of the reflectivity of a screen. The higher the gain factor, the more the light from the projector is reflected and the brighter the image is.A high gain factor, however, has the serious disadvantage that the image becomes darker from a lateral viewing angle. This becomes a critical factor in a home cinema.For home cinema purposes (from about 3 to 8 meters away), the smaller the gain factor the better the experience. The picture remains highly visible, and spectators on an angle will still enjoy an excellent viewing experience. A gain factor of 1.0 is ideal - even at a value of 1.5 compromises must be made.Materials with a high gain factor are, on the other hand, especially suited for presentations in large conference rooms.Screen material: The light dispersal ratio varies across different materials. Screens with a strong dispersal ratio adversely affect the image quality and have no place in a home cinema.Our 493 g / m² screens are optimized for the home cinema market and are characterized by an almost dispersal-free playback.When purchasing the screen you should also make sure that the material is easy to clean. Our screens are made of easy-wipe material that can be cleaned whenever necessary to ensure undisturbed viewing pleasure over the years. heart
  • £  46.95 P & P: see site
    at OurTaps
    help 'COMBO' WITH A SET OF MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A MATCHING SINGLE LEVER BASIN MONOBLOC MIXER. 1. BATH/SHOWER TAPS: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. NB. It is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. It is also possible to convert these bath taps into Deck-mounted ones by purchasing a set of Chrome Deck-mounting 'legs'. The distance between the centres at the base of the legs is approx 180mm / 18cms. They are solidly made from brass/chrome. To purchase, please see the Accessories section. 2. BASIN MONOBLOC MIXER TAPS: This Tap uses 1/4 Turn Ceramic Disc Technology with a single lever operation. The lever moves left/right for the temperature and up/down for on/off. The body is made from Brass with a polished 'mirror' Chrome Finish and the spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height is some 17 cms and the spout reaches some 9.5 cms from the body. The height from the base to the spout is 8.5 cms and the diameter of the body is 4.8 cms (the 'plinth' section is 5.2 cms). 0.5 bar water pressure is recommended. It includes 2 flexible hoses (BS Standard connections) along with fittings. There is a red/blue hot/cold indicator underneath the lever. heart
  • £  69.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a Multi function 'plastichrome' Handheld Shower Head, a 1.7m Stainless Steel Flexi hose and a 'plastichrome' adjustable/pivoting wall mounted bracket/holder for the shower head. heart
  • £  199.00 P & P: £  0.00
    at bestbathrooms_uk
    heart
  • £  269.25 P & P: £  0.00
    at trueshopping
    heart
  • £  248.25 P & P: £  0.00
    at trueshopping
    heart
  • £  366.75 P & P: £  0.00
    at trueshopping
    heart
  • £  228.00 P & P: £  0.00
    at trueshopping
    heart
  • £  18.60 P & P: £  8.99
    at glasspaneldepot
    heart
  • £  18.60 P & P: £  8.99
    at glasspaneldepot
    heart
  • £  187.00 P & P: £  30.00
    at cheap_suites
    heart
  • £  166.00 P & P: £  20.00
    at cheap_suites
    heart
  • £  79.00 P & P: £  20.00
    at cheap_suites
    heart
  • £  141.00 P & P: £  20.00
    at cheap_suites
    heart
  • £  18.49 P & P: £  0.00
    at hazelheaddesign
    heart
  • £  32.25 P & P: £  0.00
    at krbathroom
    heart
  • £  149.00 P & P: £  0.00
    at cheap_suites
    heart
  • £  59.00 P & P: £  0.00
    at Amazon Marketplace
    help The Trueshopping Standard Shower Bath Screen is designed to fit any straight-sided standard bath, where a shower has been fitted. Fitting a shower bath screen is the best way to prevent splashes and spills from the shower causing water damage to bathroom fixtures and fittings. Product features: Dimensions: heart
  • £  96.75 P & P: £  0.00
    at Tesco Direct
    help Features: Bath shower; Riva range; Suitable for use with flow regulators; Supplied with Shower kit and bracket; LP1 - 0.1 bar pressure minimum; Standards: BS5412, EN200 and/or WRAS; Suitable for all plumbing systems; Easy installation; Manufacturer provides 10 year guarantee (excluding serviceable parts); heart
  • £  59.00 P & P: see site
    at Amazon
    help Reversible Bathroom Hinged Bath Shower Screen; Dimensions: 770mm - 790mm adjustable (W) x 1435mm(H); 6mm toughened safety glass; Hinged for easy access, storage and cleaning; Reversible heart
  • £  259.00 P & P: see site
    at Amazon
    help 8mm Thick Safety Glass - 1850mm x 800mm; 1400mm Rectangular Shower Tray - Choice of Widths; Modern profile (only 40mm depth), for easy access; Hi-Flow Shower Tray Waste Included (capable of disposing of 58 litres per minute); Screen adjustable: minimum size 775mm maximum 800mm heart
  • £  109.00 P & P: see site
    at Amazon
    help Curved shower bath screen designed to fit P shaped baths; Dimensions: 840mm-curve of glass, Depth of Curve Approx. 120mm; Hinged for easy access, storage and cleaning; Reversible - suitable for left hand and right hand 'P' shaped baths heart
  • £  120.00 P & P: see site
    at Amazon
    help Modern wet room glass shower screen; Manufactured from 8mm toughened safety glass; Chrome wall channel allows up to 25mm adjustment; Stainless steel stabilising bracket fixes to adjacent wall; 700mm wide x 1850mm high x 8mm glass heart
  • £  143.99 P & P: see site
    at Amazon
    help 8mm Glass With Easy Clean Coating; Telescopic Chrome Support Bar; Adjustment For Out-of-True Walls; Easy Install Chrome Profile; Lifetime Guarantee heart
  • £  233.81 P & P: see site
    at Amazon
    help 8mm Thick Safety Glass - 1850mm x 700mm; 1200mm Rectangular Shower Tray - Choice of Widths; Modern profile (only 40mm depth), for easy access; Hi-Flow Shower Tray Waste Included (capable of disposing of 58 litres per minute); Screen adjustable: minimum size 675mm maximum 700mm heart
  • £  799.00 P & P: see site
    at Amazon
    help 1500x700 3 Sided Walk In Shower Enclosure With Tray; 900mm long 10mm toughened clear, front glass shower screen; 8mm toughened clear, return shower glass screens; Includes 1500x700x40mm acrylic tray & 90mm high flow waste; Note: shower valve not included heart
  • £  286.99 P & P: see site
    at Amazon
    help 8mm Thick Safety Glass - 1850mm x 900mm; 1500mm x 900mm Rectangular Shower Tray; Modern profile (only 40mm depth), for easy access; Polished Chrome finish; This item is new and in its original packaging heart
  • £  355.00 P & P: see site
    at Amazon
    help Includes curved front panel, shower tray and side panel; Dimensions (L x W x H): 1400mm x 900mm x 1850mm (55; Lifetime Guarantee; Ideal for modern bathrooms; Includes full fitting instructions heart
  • £  156.65 P & P: see site
    at Amazon
    heart
  • £  219.00 P & P: see site
    at Amazon
    help Modern wet room glass shower screen; Manufactured from 8mm toughened safety glass; Chrome wall channel allows up to 25mm adjustment; Stainless steel stabilising bracket fixes to adjacent wall; 1400mm wide x 1850mm high x 8mm glass heart

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on shower screen bracket

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.