Results for "audio power amp"

Filter by:

  • £  152.07 P & P: £  7.92
    at Thomann
    help SM Pro Audio HP6E - 6-channel headphone amp with 10x TRS inputs, 5x stereo channels, mix control for each amplifier output, 6x class A headphone amplifiers, 600mW nominal output per channel (@32 Ohms), 20Hz-20kHz frequency response @100mw output (+/-0.3dB), built-in flash memory for last state memory recall, built-in power supply. Dimensions: 19”/1U Studio/Recording Equipment / Headphone Preamps heart
  • £  759.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz Impedance: 4 ohms Power: 40W Max Cabinet Specification Ambient glow LED waterproof light bar fitted to underneath of cabinet. 72x 0.2 watt Super Bright white LED's. Crystal clear mirror (not tinted) Built-in full size demister pad that switches on and off with lights. Polycarbonate light diffusers. Internal 240 volt shaver socket with integral on/off rocker switch. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Beautiful Highest Quality Alumi heart
  • £  664.50 P & P: £  7.92
    at Thomann
    help HK Audio L5 112 FA Linear 5, active fullrange speaker with internal 1000 Watt Class D amp (650 W + 350 W, biamped), 1x 12+ 1 with 1,75 voice coil, 64 - 18.000 Hz (+/- 3dB), 134 dB Max SPL, 2x XLR-Combi Input, 2x XLR Thru, 1x XLR Mix out, switchable EQ (Small Venue / High Power), asymmetric horn with 60° - 90° x 55°, plywood/MDF housing with 3x M8 flying points (optional bracket 323585), DuoTilt pole mount, 2 handles, black housing, dimensions (WxHxD): 370 x 668 x 365 mm, weight 23,9 Kg PA/Live Equipment / Fullrange Speaker Cabinets heart
  • £  309.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 2 x T8 15watt 4100k warm white fluorescent lamps (included). Ambient glow LED waterproof light bar fitted to underneath of cabinet. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Crystal clear mirror (not tinted). The cabinet includes 2 ad heart
  • £  754.79 P & P: £  7.92
    at Thomann
    help HK Audio L5 115 FA Linear 5, active fullrange speaker with internal 1000 Watt Class D amp (650 W + 350 W, biamped), 1x 15+ 1 with 1,75 voice coil, 64 - 18.000 Hz (+/- 3dB), 139 dB Max SPL, 2x XLR-Combi Input, 2x XLR Thru, 1x XLR Mix out, switchable EQ (Small Venue / High Power), asymmetric Horn with 60° - 90° x 55°, plywood/MDF housing with 3x M8 flying points (optional bracket 323585), DuoTilt pole mount, 2 handles, black housing, dimensions (WxHxD): 449 x 708 x 450 mm, weight 30,7 Kg PA/Live Equipment / Fullrange Speaker Cabinets heart
  • £  354.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 48 x 0.1 watt white LED's. Ambient glow LED waterproof light bar fitted to underneath of cabinet. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Crystal clear mirror (not tinted). The cabinet includes 2 adjustable glass shelves. heart
  • £  370.66 P & P: £  7.92
    at Thomann
    help HK Audio Elements EA 600 Power Amp - system amplifier with 600W class D amp from the Elements System, connection for a maximum of four mid/high units or a maximum of two subwoofers or one subwoofer with two tops. E-Connect signal connection, RMS limiter, combi connection, XLR in/out, 1x Speakon parallel output, 1x E-Connect out. Dimensions: 11 x 46.5 12cm. Weight: 2.75kg PA/Live Equipment / Amplifiers heart
  • £  399.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 2 x T8 15w 4000k warm white fluorescent lamps (included). RGB Colour change LED waterproof light bar fitted to underneath of cabinet. Remote control. Built in Demister pad on door. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. heart
  • £  140.19 P & P: £  7.92
    at Thomann
    help MXR Audio Electronics MC-404 Custom Wah Wah Pedal - custom designed CTS extended life low-noise pot, gain output stage with kick switch and LED, true bypass, powered via battery or Dunlop power supply (not included). Made in USA. Guitars, Basses, Amps / Floor Effects heart
  • £  389.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 550Hz - 17KHz Impedance: 6.4 ohms@400Hz Power: 50W Max Mirror Specification 60 x 0.1w Low energy LED white lights (included). 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Built-in full size demister pad that switches on and off with lights. SELF branded LED driver included. Infra red sensor switch (bottom of the frame). Please allow at least 10cm from nearest obstacle e.g Basin, Tap, etc., Rear back box is made of mild steel powder coated white to a gloss finish. The mirror has a 2mm bevelled heart
  • £  363.53 P & P: £  7.92
    at Thomann
    help Voodoo Lab GCX Audio Switcher - complete switching system, use each of the eight loops for in/out effect switching, A/B switching to select amps and preamps or to control any type of footswitch function such as amp channel switching, add a mixer (such as our System Mix Plus) to create a parallel FX system and use GCX loops to mute the inputs to your rack effects - this allows effects such as delay and reverb to trail off naturally. GCX loops use no active circuitry, gold contact relays (sealed in pure nitrogen) give you the best possible reliability and tone, GCX loops add true bypass to any pedal effect to greatly improve tone when the effect is not being used, incl. power supply, midi cable optional (# 129100) Guitars, Basses, Amps / Misc. Acessories heart
  • £  194.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 550Hz - 17KHz Impedance: 6.4 ohms@400Hz Power: 50W Max Mirror Specification 30 x 0.1w Low energy LED white lights (included). 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Built-in full size demister pad that switches on and off with lights. SELF branded LED driver included. Infra red sensor switch (bottom of the frame). Please allow at least 10cm from nearest obstacle e.g Basin, Tap, etc., Rear back box is made of mild steel powder coated white to a gloss finish. The mirror has a 2mm bevelled e heart
  • £  150.48 P & P: £  7.92
    at Thomann
    help Audio-Technica ATH-OX7AMP headphone, dynamic, closed, driver 40 mm, impedance 68 ohms, frequency response 9 - 26000 Hz, maximum input power: 800 mW, sensitivity 105 dB, weight: 220 g, incluses carrying pouch and AAA- battery and 2 flat cables ( 1x with with in-line mic, volume & controller), microphone: condenser, microphone polar pattern: omnidirectional, frequency response: 100 - 10,000 Hz, sensitivity: -40 dB (0 dB = 1 V/Pa, 1 kHz) Studio/Recording Equipment / Headphones heart
  • £  354.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 2 x T8 15watt 4100k warm white fluorescent lamps (included). RGB Colour change LED waterproof light bar fitted to underneath of Cabinet. Remote control. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Crystal clear m heart
  • £  6.30 P & P: £  0.00
    at ebay.co.uk
    help powered by frooition pro shop search din plug socket 16 amp click here to view full size full size image click to close full size item description please check whether the spare part shown in this listing actually corresponds with the spare part you are looking for messages sent after purchase may not be seen until after dispatch pearl din plug socket 16 amp audio electrical connections easy to use plastic cap important must read before ordering it is your responsibility as the buyer to make sur heart
  • £  199.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 550Hz - 17KHz Impedance: 6.4 ohms@400Hz Power: 50W Max Mirror Specification 48 x 0.1w Low energy LED white lights (included). 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Built-in full size demister pad that switches on and off with lights. SELF branded LED driver included. Infra red sensor switch (bottom of the frame). Please allow at least 10cm from nearest obstacle e.g Basin, Tap, etc., Rear back box is made of mild steel powder coated white to a gloss finish. The mirror has a 2mm bevelled heart
  • £  100.90 P & P: £  0.00
    at Hifi-Tower UK
    help The Skytec SPL500 is a great small PA amp perfect for small parties and events and ideal for home use. The unit combines the power of a PA with the flexibility of a Hifi Amplifier with multiple input connections and a 3-Band equalizer. If you want an amp that’s powerful enough to host a small party but flexible enough to connect your other home Hi-Fi audio equipment, this amp is the solution! With blue LED illuminated modern front panel. heart
  • £  354.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 56 x 0.1 watt white LED's. Ambient glow LED waterproof light bar fitted to underneath of cabinet. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Crystal clear mirror (not tinted). The cabinet includes 2 adjustable glass shelves. heart
  • £  236.02 P & P: £  7.92
    at Thomann
    help M-Audio M3-8, three-way active studio monitor, Inline mid- & high-frequency drivers, 8 woven Kevlar low frequency driver, 5 woven Kevlar mid-frequency driver, 1 silk dome tweeter with integrated waveguide, tri-amp class A/B power 220 watts total; 150W LF / 35W MF / 35W HF, crossover frequency: Low-Mid: 450 Hz, Mid-High: 3.9 kHz, frequency response: 40 Hz - 20000 Hz, onboard 3-band EQ +/- 6dB Boost/cut at LF100Hz - MF1kHz - HF10kHz, bypass switch, low-cut filter switchable: flat - 60Hz - 80Hz, Input impedance: 20kOhms balanced, 10kOhms unbalanced, rear mounted controls, inputs: xlr and 6,3mm jack balanced, 6,3mm jack unbalanced, protection: Output current limiting; over-temperature; transient on/off protection to prevent speaker pops; subsonic filter; external mains fuse, cabinet: Wood veneer front baffle with vinyl-laminated cabinet, dimensions: 268 x 434 x 285 mm, weight: 12,8 kg Studio/Recording Equipment / Studio Monitors heart
  • £  549.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 2 x T8 15w 4000k warm white fluorescent lamps (included). RGB Colour change LED waterproof light bar fitted to underneath of Cabinet. Remote control. Built in Demister pad on both doors. Internal LED lighting. Double sided mirror doors. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (b heart
  • £  740.53 P & P: £  7.92
    at Thomann
    help Universal Audio Solo 610 - mono tube mic pre-amp with 48V phantom power, lo-cut filter and phase reverse. Maintains the 610's flexible dual impedance selection for both mic and DI inputs. Sound Processors, Effects / Preamps heart
  • £  394.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 2 x T5 13 watt 4000k warm white fluorescent bulbs (included). Ambient glow LED waterproof light bar fitted to underneath of cabinet. 240 volt internal shaver socket with integral on/off rocker switch. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Beautiful Highest Quality Aluminium Chassis. Fully adjustable shelf holders. The cabinet has a 2mm bevel heart
  • £  37.22 P & P: £  7.92
    at Thomann
    help American Audio Active DBM, 19 rack-mount, LED DB display with RCA and balanced Input/Output. Functions in Dot and Bar modes. Removable rack ears so unit can be mounted to table. Demo mode so unit doesn't require signal for LED's to illuminate, Features: Designed to set in an amp rack to view your decibel level, Creates a great light show in your amp rack, Display progresses from green through amber to red, Sensitivity adjustment on both left and right channels, 2 separate modes: dot and bar, Includes 12V DC 500mA UL approved power supply, Specifications: Line Inputs: Left & Right RCA, Line Outputs: Left & Right RCA, Power Consumption: 10W, Dimensions: 44.5mm x 483mm x 44.5mm, Weight: 0.85 kg PA/Live Equipment / Accessories for PA Systems heart
  • £  450.28 P & P: see site
    at Thomann
    help EVE audio TS108, active subwoofer, free-field frequency range (-3db): 33 - 300hz, woofer: 195mm/8", maximum spl @ 1m: 105db, total short-term output power : 150w, without any low-port noise distortion due to a passive radiator, protection limiter, settings for system volume (satellite & sub): -inf. - +6db, level-lock dip switch, filter-lock dip switch, input level dip switch: +7dbu/+22dbu, phase inversion: 0/180, switchable satellite filter: flat/80hz, variable subwoofer filter: 60hz-140hz + lfe, incl. infrared remote control, xlr connectors in-/out: l-r and lfe, impedance: 10 kohms, power consumption: standby < 1w, full output 170va, dimensions whd: 280x415x365mm, weight: 11,5kg heart
  • £  12.99 P & P: £  0.00
    at ebay.co.uk
    help 50 metre kit of 1 mm auto thinwall single core cable you choose colours and lengths 40 colours available a very versatile auto cable ideal for power solar panels and most car boat motorhome applications it can be used for vehicle lighting audio motors relays and most other 12 volt applications this is a 50 metre kit made up of quality thin wall 1 mm 32 st 0 2 16 5 amp auto cable you can choose from 40 colours cut to full metre lengths up to a total of 50 metres when you buy it now just add your heart
  • £  759.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz Impedance: 4 ohms Power: 40W Max Cabinet Specification Ambient glow LED waterproof light bar fitted to underneath of cabinet. 72x 0.2 watt Super Bright white LED's. Crystal clear mirror (not tinted) Built-in full size demister pad that switches on and off with lights. Polycarbonate light diffusers. Internal 240 volt shaver socket with integral on/off rocker switch. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Beautiful Highest Quality Alumi heart
  • £  152.07 P & P: £  7.92
    at Thomann
    help SM Pro Audio M-Patch Active-1, Aktiver USB Monitor Controller/Switch Box, up to four Input Sources (3x Stereo-Analog and 1x USB), 3x analog Stereo-Outputs + USB, A/B-Switch, Mono-Summing, Mute and Dim Function (incl. Ducking), via Footswicht, Talkback-Function, LED-Meter, +4 dBu/-10dBV-Switch, Dual Headphone-Amp, incl. external Power Supply. Studio/Recording Equipment / Accessories for Studio Equipment heart
  • £  439.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 2 x T5 13 watt 4000k warm white fluorescent bulbs (included). RGB Colour change LED waterproof light bar fitted to underneath of Cabinet. 240 volt internal shaver socket with integral on/off rocker switch. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Beautiful Highest Quality Aluminium Chassis. Fully adjustable shelf holders. The cabinet has a 2mm b heart
  • £  12.99 P & P: £  0.00
    at ebay.co.uk
    help 50 METRE KIT. YOU CHOOSE COLOURS AND LENGTHS. A very versatile auto cable ideal for power, solar panels and most car, boat, motorhome applications. It can be used for vehicle lighting , audio, motors, relays and most other 12 volt applications. This is a heart
  • £  354.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 56 x 0.1 watt white LED's. Ambient glow LED waterproof light bar fitted to underneath of cabinet. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Crystal clear mirror (not tinted). The cabinet includes 2 adjustable glass shelves. heart
  • £  363.53 P & P: £  7.92
    at Thomann
    help FMR Audio RNP 8380, Really Nice Preamp, the RNP, is a 1/3 rack two channel mic pre-amp. FMR's objectives for this pre-amp were: Really neutral sonics, A Really Nice price, Compatibility to the RNC, also balances the RNC, We believe that the RNP is a good addition to any studio looking for an exceptionally clear, transparent sounding mic pre-amp, i.e. if you want to hear the artist's voice, drum, cymbal, bass, etc., not the pre-amp, 48V Phantompower (switchable), phaseinvert, 2 unsym. Inputs, Imp. corrected, 2 sym. Inputs, Gain: 72 db Clip at 28dBu bei 0db Gain, Output: 28 dBu sym., 22dBu unsym., Hi-Z DI inputs, incl. power supply Sound Processors, Effects / Preamps heart
  • £  257.19 P & P: see site
    at Thomann
    help American Audio VMS4.1 - MIDI controller with 4 USB/analog selectable MIDILOG (MIDI & analog) channels. All audio control faders, knobs, switches, and buttons are smoothed (eliminates popping, wiper noise and zipper noise). On/off soft startup and turnoff, gain/treble/mid/bass EQ on all MIDILOG channels, 2x phono/line selectable analog channels, 2x microphone channels with illuminated on/off switches and gain/treble/mid/bass EQ, on/off cueing on each MIDILOG channel, split cueing headphones with rotary mix control, illuminated rubber knobs for ease of use in dark environments, solid 1.6mm thick faceplate for extra durability, panel-mounted rotary knobs, full analog mixer operation if the computer crashes or with external power supply, Innofader replaceable crossfader compatible (sold separately), crossfader curve control, crossfader assign and reverse, Q-Start crossfader controlled startup for 2 external audio players, user-replaceable channel faders, master and booth outputs with L/R balance, balanced master outputs, 12-position stereo master output VU meter, integrated mouse pad, long life MIDI-assignable touch strips, 2x 10bit resolution pitch sliders, 62x assignable MIDI buttons and switches (including 50x illuminated MIDI buttons, 18 with dual blue/red LEDs), 4x assignable rotary encoders, 34x assignable rotary controllers, 5x assignable linear fader controllers, dual MIDI controls on all buttons and switches, dual 2000-point resolution touch sensitive turntable scratch controllers, 24bit/48kHz analog audio, 16bit/44.1kHz USB audio, 10bit resolution on all analog fader controls. THD: <0.1%. Channel separation: >60dB. S/N ratio: >85dB. Analog channel audio latency: < 1msec. Selectable USB modes: 4 in/4 out mode for running software effects on phono/line analog channels or 2 in/8 out mode for running 4 software channels and master recording, 2ms response on all buttons, 4ms response on all rotary and linear faders, 1ms USB latency., Virtual LE Software, Dimensions 482 (L) x 325 (W) x 40 (H) mm heart
  • £  379.95 P & P: £  0.00
    at SlrHut
    help The black Denon HEOS Amp Wireless Amplifier allows you to connect your own external speakers for wireless audio playback. This amplifier can deliver up to 200W of total power and can accommodate two speakers and a powered subwoofer. The HEOS amplifier uses efficient class-D digital amplification to power your connected speakers.?  This amplifier features dual-band Wi-Fi and Ethernet interfaces for high-speed Internet connectivity. Using the free HEOS app for Android and iOS devices you can wirelessly stream locally stored content and Internet radio services such as Pandora and Spotify. You can also use DLNA connectivity to stream content stored on NAS drives PCs and Macs. Additionally digital optical stereo RCA 3.5mm and USB ports are built into this system for interfacing wired audio sources such as MP3 players. Using the free HEOS app add additional HEOS systems and name each player according to the room where it is located. Group rooms together to play the same song in party mode. Separate rooms to play a different song in each of them. Instantly control what is playing in every room view cover art or check the queue for what is coming up next. You can also create and save playlists. Stream from your favorite music service such as Rhapsody Pandora Spotify or TuneIn. Stream music stored locally on your iOS or Android smartphone or tablet. Stream music from devices on your home network such as NAS drives and PC and Mac computers. A USB jack optical digital input and auxiliary 3.5 mm analog input jack allow playback from compatible sources to one or more HEOS players for synchronized playback. Designed to be set up and ready for use in minutes. heart
  • £  354.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 2 x T8 15w 4000k warm white fluorescent lamps (included). Ambient glow LED waterproof light bar fitted to underneath of cabinet. Built in Demister pad on door. Internal 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Beautiful Highest Quality Alumin heart
  • £  196.42 P & P: £  7.92
    at Thomann
    help M-Audio M3-6, three-way active studio monitor, Inline mid- & high-frequency drivers, 6 woven Kevlar low frequency driver, 5 woven Kevlar mid-frequency driver, 1 silk dome tweeter with integrated waveguide, tri-amp class A/B power 160 watts total; 110W LF / 30W MF / 20W HF, crossover frequency: Low-Mid: 400 Hz, Mid-High: 4000 Hz, frequency response: 40 Hz - 22000 Hz, onboard 3-band EQ +/- 6dB Boost/cut at LF100Hz - MF1kHz - HF10kHz, bypass switch, low-cut filter switchable: flat - 80Hz - 100Hz, Input impedance: 20kOhms balanced, 10kOhms unbalanced, rear mounted controls, inputs: xlr and 6,3mm jack balanced, 6,3mm jack unbalanced, protection: Output current limiting; over-temperature; transient on/off protection to prevent speaker pops; subsonic filter; external mains fuse, cabinet: Wood veneer front baffle with vinyl-laminated cabinet, dimensions: 235 x 381 x 230 mm, weight: 10,5 kg Studio/Recording Equipment / Studio Monitors heart
  • £  679.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz Impedance: 4 ohms Power: 40W Max Cabinet Specification RGB Colour Changing LED waterproof light bar fitted to underneath of cabinet. Remote control. 84x 0.2 watt Super Bright white LED's. Crystal clear mirror (not tinted) Built-in full size demister pad that switches on and off with lights. Polycarbonate light diffusers. Internal 240 volt shaver socket with integral on/off rocker switch. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink.
  • heart
  • £  13.49 P & P: £  0.00
    at ebay.co.uk
    help YOU CHOOSE COLOURS AND LENGTHS. A very versatile thin wall auto cable ideal for power, solar panels and most car, boat, motorhome applications. It can be used for vehicle lighting , audio, motors, relays and most other 12 volt applications. Compared to st heart
  • £  186.76 P & P: see site
    at Thomann
    help American Audio UCD100, 19-inch rack mount single CD/MP3 Player, Plays MP3, CD, CD-R and CD-RW discs, LCD Display shows track name when a MP3 disc is played, Includes Infrared Remote Control with volume control + other features, 2 USB music inputs (1 on front, 1 on rear) for external music sources (hard drive, MP3 Players, Thumb Drives, SD Cards with adapters), XLR Balanced Output on rear - send audio signal directly to Powered Speakers, RCA Outputs, Seamless Loop, Auto & Manual BPM Counter, +10 track advance button, Mechanical Anti Skip Protection, Quick MP3/CD recognition, Pitch (CD Source): Hyper Pitch (+/-4%, +/-8%,+/-16%,+/-100%), Pitch (MP3 Source): (+/-4%, +/-8%,+/-16%), Title display for MP3´s,Tempo Lock, Bright LCD display, Single/Continue Mode and Time Remaining/Time Gone-By Viewing, Frame search, Jog Wheel control, Power Consumption: 13W, Includes American Audio Database Builder Program (PC Only See user manual for hardware requirements), Multi-voltage Power Supply: AC 100-240V, 50/60Hz, Dimensions (LxWxH): 482x271x89mm (2-space), Weight: 4.35kg heart
  • £  198.00 P & P: £  7.92
    at Thomann
    help FMR Audio ARC Guitar Compressor, DI-Function, Rotary: Drive, Input & Amp levels, Switches: Bypass, chassis mounted, Meter: Blue LED showing process amount, Connectors: 2 x 1/4 (1 input, 1 output) jack, 1 XLRM balanced/differential, Power supply optional (9 to 12 V, AC or DC, @200mA minimum current, Art-No. 108096 for example). Sound Processors, Effects / Dynamic Processors heart
  • £  469.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz SPL 82db, Qts: 1.31, Vas: .0140Cuft., fo: 160Hz free air Impedance: 4 ohms Power: 40W Mirror Cabinet Specification 2 x T5 13 watt 4000k warm white fluorescent bulbs (included). RGB Colour change LED waterproof light bar fitted to underneath of Cabinet. 240 volt internal shaver socket with integral on/off rocker switch. Built-in full size demister pad fitted to rear of door that switches on and off with lights. SELF branded On/off infra red sensor switch located on the right hand side of frame that is operated by wave of hand 5-8cm away. Ple heart
  • £  7.89 P & P: £  0.00
    at ebay.co.uk
    help A very versatile auto cable ideal for power, solar panels and most car, boat, motorhome applications. It can be used for vehicle lighting , audio, motors, relays and most other 12 volt applications. This is a 20 METRE KIT made up of quality 0.5mm 16st/0.2 heart
  • £  83.09 P & P: see site
    at Thomann
    help Thon CD Player Case for American Audio Radius 1000, 2000 or 3000 - 7mm birch ply with 25 x 25mm aluminium profile, foam padding, 2x butterfly latches, 1x carry handle, rubber feet, space for power cable, steel corners, dimensions: 34 x 50 x 19.4 (W x D x H). weight: 4,9 kg, weight with Radius: 8,7kg, Made in Germany heart
  • £  835.57 P & P: £  7.92
    at Thomann
    help Lake People Mic-Amp F366D, four-channel ultra-low noise microphone preamplifier with excellent audio performance and common features. Ideal for bypassing insufficient mixing console preamps or for direct-to-tape sessions. Channel features: Electronically balanced input via XLR, gain 0...+66 dB switchable in 12 steps of 6 dB, lo-cut, 12 dB/oct., 70hz, noise -129 dB at 60 dB gain, switchable 48 V phantom powering, switchable phase reverse, 4 step level meter, 0...-15 dBr may be calibrated individually inside, electronically balanced outputs via XLR, options: transformer balanced outputs, options: F366-S two channel preamp, option: F366-T six channel preamp, Sound Processors, Effects / Preamps heart
  • £  234.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 550Hz - 17KHz Impedance: 6.4 ohms@400Hz Power: 50W Max Mirror Specification 48 x 0.1w Low energy LED white lights (included). 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Built-in full size demister pad that switches on and off with lights. SELF branded LED driver included. Infra red sensor switch (bottom of the frame). Please allow at least 10cm from nearest obstacle e.g Basin, Tap, etc., Rear back box is made of mild steel powder coated white to a gloss finish. The mirror has a 2mm bevelle heart
  • £  114.05 P & P: £  7.92
    at Thomann
    help SM Pro Audio HP12E, 12-channel headphones amp, 6 x class A Headphone Amplifiers, 12 x 1/4 TRS Headphone Outputs, L/R Balanced XLR Inputs, L/R Balanced 1/4 TRS Inputs, 2 x L/R 1/4 TRS Link Outputs, Level Control Per Output, A/B Source Selection Per Output, Loud Output Levels with a Variety of Headphone Types, Built-in AC Power Supply Studio/Recording Equipment / Headphone Preamps heart
  • £  34.03 P & P: see site
    at Thomann
    help Lindy Audio Converter SPDIF digital (optical and coaxial) to Analog RCA, Converts digital optical or coaxial SPDIF signals to analogue stereo audio, Input ports: 1 x TosLink (Optical Fibre), 1 x Digital Coaxial (Phono), Input format: SPDIF, LPCM (linear pulse code modulation) 2Ch, up to 24 bit, Sampling Frequency: 32KHz, 44.1KHz, 48KHz, Output ports: 2 x Analogue Phono Ports (Left & Right), Integrated digital interpolator filter and Digital to Analogue Converter (DAC), Supports uncompressed digital stereo audio input, Includes 5V DC multi country power supply, Dimensions: 46 x 46 x 24mm (WxDxH) heart
  • £  199.95 P & P: £  0.00
    at eBay.co.uk
    help the pro ject stereo box s phono is a combination of the stereo amp box s pre box s and phono mm in one stylish body offering exceptional sound quality the new s body design makes the stereo box s phono a slim and elegant looking device the amplifier can be controlled with a slim line ir remote or via the simple and minimal front facing controls a record out is also included on the back of the device allowing the stereo box s phono to be partnered with other stereo components like the head box th heart
  • £  289.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 550Hz - 17KHz Impedance: 6.4 ohms@400Hz Power: 50W Max Mirror Specification 48 x 0.1w Low energy LED white lights (included). 240 volt shaver socket with integral on/off rocker switch. Shaver socket can be used with lights off. Built-in full size demister pad that switches on and off with lights. SELF branded LED driver included. Infra red sensor switch (bottom of the frame). Please allow at least 10cm from nearest obstacle e.g Basin, Tap, etc., Rear back box is made of mild steel powder coated white to a gloss finish. The mirror has a 2mm bevelled heart
  • £  121.18 P & P: £  7.92
    at Thomann
    help Source Audio Soundblox 2 Manta Bass Filter, filter effects pedal with integrated distortions for electric bass guitar, 12 different low pass high pass band pass, single peak multi-peak and notch filters, 8 onboard distortions, deep control set, proprietary 56-bit digital signal processor (SA601) and 24-bit converters, multi-function jacks for on-the-fly control over modulation or any adjustable parameter via Source Audio Hot Hand motion sensors or Dual Expression Pedal (not included), MIDI capable with optional Soundblox HUB for MIDI access to control parameters and save up to 128 user presets, chose between analog buffered or relay based true bypass, cast aluminum housing, dimensions: L: 11.4cm x W: 11.4cm x H: 5.7cm, 9V DC power supply included. Guitars, Basses, Amps / Floor Effects heart
  • £  27.59 P & P: £  11.16
    at Lightinthebox
    help Operating System:Android 4.2; Display Diagonal Size:7 Inch; Max Resolution:800480; Display Technology:5-POINT touch,TFT; Processor Model:Allwinner A23; Number of Cores:Dual Core; Processor Clock Speed:1.2GHz; RAM:512MB; ROM:8GB; Support Extend Card:32GB; Front Camera:1.3 MP; Ports:TF Card slot,Mini USB; Audio/Video:Built-in high quality louder Speakers,3.5mm earphone; Networking / Data Link Protocol:WiFi; Video:MP4,3GP,ASF,MPEG,WMV; Audio:WMA,WAV,AAC,Midi,MP3; Picture:JPEG; Ebook:TXT; Languages:Norwegian,Italian,German,French,Slovenian,Korean,Dutch,Spanish,Chinese,Russian,Traditional Chinese,Polish,Indonesian,Hungarian,Greek,Japanese,Swedish,English; Net Weight(g):300; Packing List:1× Power adapter,1× User manual - English,1× Tablet,1x Mini USB(OTG),1× Tablet to USB cable heart
  • £  659.99 P & P: see site
    at illuminated mirrors
    help Not to be confused with low power, low quality audio systems fitted to other products. The Bluetooth™ audio option available on a wide range of our bathroom cabinets and mirrors produces a high quality stereo sound from an impressive 20Wrms per channel amplification system. Pair your mobile device easily using Bluetooth™ 3.0+EDR, or connect directly to the system using a 3.5mm jack plug. For the audiophiles, the full technical specification of the Bluetooth™ option is listed below: Bluetooth™ Specification Bluetooth™ , 3.0+EDR compliant Typical +2dBm Class 2 output power Receiver Sensitivity: GFSK typical -90dBm, Amplifier Specification 0.03% THD+N @10W 4ohm 0.1% THD+N@12W 4ohm 0.18% IHF+IM@1W 4ohm High power 25W@4 ohm,10% THD+N Vdd=14.6V 22W@4 ohm,10% THD+N Vdd=13.5V 13W@8ohm ,10% THD+ N Vdd+13.5V Class-T architecture High efficiency 88% @12W 8ohm 81% @ 20W 4ohm Dynamic range=99dB Over-current protection Over-temperature protection Speaker Specification Frequency Response: 105Hz - 18KHz Impedance: 4 ohms Power: 40W Max Cabinet Specification Ambient glow LED waterproof light bar fitted to underneath of cabinet. 84x 0.2 watt Super Bright white LED's. Crystal clear mirror (not tinted) Built-in full size demister pad that switches on and off with lights. Polycarbonate light diffusers. Internal 240 volt shaver socket with integral on/off rocker switch. Self branded infra red sensor on/off sensor switch (bottom). Please allow 10cm from nearest obstacle e.g tap or sink. Beautiful Highest Quality Alumi heart
  • £  299.92 P & P: see site
    at Thomann
    help EVE audio TS107, active subwoofer, free-field frequency range (-3db): 36 - 300hz, woofer: 165mm/6.5", maximum spl @ 1m: 102db, total short-term output power : 100w, without any low-port noise distortion due to a passive radiator, protection limiter, settings for system volume (satellite & sub): -inf. - +6db, level-lock dip switch, filter-lock dip switch, input level dip switch: +7dbu/+22dbu, phase inversion: 0/180, switchable satellite filter: flat/80hz, variable subwoofer filter: 60hz-140hz + lfe, incl. infrared remote control, xlr connectors in-/out: l-r and lfe, impedance: 10 kohms, power consumption: standby < 1w, full output 120va, dimensions whd: 230x355x300mm, weight: 8,2kg heart
  • £  755.74 P & P: see site
    at Thomann
    help EVE audio TS112, active subwoofer, free-field frequency range (-3db): 24 - 300hz, woofer: 300mm/12", maximum spl @ 1m: 112db, total short-term output power : 400w, without any low-port noise distortion due to a passive radiator, protection limiter, settings for system volume (satellite & sub): -inf. - +6db, level-lock dip switch, filter-lock dip switch, input level dip switch: +7dbu/+22dbu, phase inversion: 0/180, switchable satellite filter: flat/80hz, variable subwoofer filter: 60hz-140hz + lfe, incl. infrared remote control, xlr connectors in-/out: l-r and lfe, impedance: 10 kohms, power consumption: standby < 1w, full output 410va, dimensions whd: 390x560x508mm, weight: 25,5kg heart
  • £  64.90 P & P: £  0.00
    at hifi-tower
    heart
  • £  10.59 P & P: £  0.00
    at earlybirdsavings
    heart
  • £  7.49 P & P: £  0.00
    at tomtop_home
    heart
  • £  7.45 P & P: £  0.00
    at tomtop_w
    heart
  • £  4,099.00 P & P: £  0.00
    at spectrum-sound-light
    heart
  • £  1,750.00 P & P: £  0.00
    at spectrum-sound-light
    heart
  • £  29.90 P & P: £  0.00
    at hifi-tower
    heart
  • £  69.90 P & P: £  0.00
    at hifi-tower
    heart
  • £  63.90 P & P: £  0.00
    at hifi-tower
    heart
  • £  31.75 P & P: £  0.00
    at discotrader-uk
    heart
  • £  180.00 P & P: £  12.00
    at d.brock
    heart
  • £  420.00 P & P: £  0.00
    at reidys_music
    heart
  • £  47.96 P & P: £  0.00
    at elenor-liam
    heart
  • £  13.69 P & P: £  0.00
    at marcmart.ukau
    heart
  • £  9.90 P & P: £  0.00
    at japanbox
    heart
  • £  63.22 P & P: £  0.00
    at pcarena-bristol
    heart
  • £  22.99 P & P: £  0.00
    at radioworld-online-uk
    heart
  • £  2.47 P & P: £  0.00
    at top-quality-tools
    heart
  • £  10.99 P & P: £  0.00
    at earlybirdsavings-uk
    heart
  • £  28.00 P & P: £  10.00
    at qiqi
    heart
  • £  9.80 P & P: £  4.17
    at Amazon Marketplace
    help Delivery quantity: 1 piece(s) Manufacturer: Replacement Manufacturer number: STK2145 Case: 80x45mm Kind of Semiconductor: IC Model: Hybrid-IC Max. Input Voltage: ±54V Max. Power Dissipation (Pd): 2x40W Suggested Operating Voltage: ±32V RoHS compliant: yes heart
  • £  42.18 P & P: £  0.00
    at Amazon UK
    help for Montana 600/Montana 650 heart
  • £  49.00 P & P: see site
    at Amazon
    help 2-channel USB interface; One XLR microphone input; 1/8 Inch headphone jack; Zero-latency direct monitoring; USB bus powered heart
  • £  64.81 P & P: see site
    at Amazon
    help T-Amp IC Tripath TK2050 Chip set (TC2000+TP2050); Supports 2 way RCA input; High-end loudspeaker protection circuits, guarantee that your expensive speaker is absolutely safe; High efficiency output power stereo 30W or mono 40; An artfully executed audiophile-grade amplifier with top-notch components heart
  • £  69.68 P & P: see site
    at Amazon
    help 2 combo mic/instrument inputs with class a mic preamplifiers and 48v phantom power; 24-bit resolution and 44.1 and 48 khz sampling rate, professional-grade a/d/a converters; Includes studio one 2 artist: presonus' revolutionary new digital audio workstation, with unlimited track count and 6+ gb of 3rd-party resources; Designed in baton rouge, louisiana heart
Page: 1 2 3 4 5 6 7 8 9 10 NEXT

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on audio power amp

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.