Results for "large magnifying glass"

Filter by:

  • £  9.99 P & P: £  0.00
    at wecostlessstore
    heart
  • £  82.50 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  4.99 P & P: £  0.00
    at thinkprice
    heart
  • £  99.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  4.99 P & P: £  0.00
    at thinkprice
    heart
  • £  100.00 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  6.99 P & P: £  0.00
    at ebuystation2010
    help ✔High Quality✔Dual-purpose✔Free&Fast Delivery✔UK Stock✔ heart
  • £  56.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  3.59 P & P: £  0.00
    at a1center2015
    help ✔High Quality✔90mm&Gold✔Free & Fast Post✔UK Seller✔ heart
  • £  100.00 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  5.89 P & P: £  0.00
    at a1center2015
    help ✔100% New Design✔Sameday 1St Class Dispatch✔UK Seller✔ heart
  • £  56.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  12.99 P & P: £  0.00
    at lowerpricedeal
    help Best Value, FAST SHIPPING, Christmas, Special Promotion heart
  • £  56.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  2.95 P & P: £  0.00
    at ppretail
    heart
  • £  4.49 P & P: £  0.00
    at thinkprice
    heart
  • £  4.79 P & P: £  0.00
    at alices-dream
    help ✔Fast & Free Post✔Sameday 1St Class Dispatch✔UK Seller✔ heart
  • £  6.59 P & P: £  0.00
    at uniquepoint2014
    help ✔Amazing Quality✔Dual-purpose✔Free & Fast Delivery✔UK✔ heart
  • £  6.39 P & P: £  0.00
    at igiftbox
    help ✔Amazing Quality✔Same day 1St Class Dispatch✔UK Stock✔ heart
  • £  4.99 P & P: £  0.99
    at bestoffer02
    heart
  • £  5.95 P & P: £  0.00
    at b-gadget
    heart
  • £  5.80 P & P: £  0.00
    at easy4ulife
    heart
  • £  10.99 P & P: £  0.00
    at home-leader
    heart
  • £  9.99 P & P: £  0.00
    at iluvthisworld2010
    help ⭐UK STOCK⭐Gift with EU Plug ⭐1.8X 5X Magnifying heart
  • £  5.99 P & P: £  0.00
    at igiftbox
    help ✔Amazing Price✔Dual-purpose✔Free & Fast Post✔UK Stock✔ heart
  • £  3.24 P & P: £  0.00
    at ppretail
    heart
  • £  5.99 P & P: £  0.00
    at bestoffer02
    heart
  • £  6.49 P & P: £  0.00
    at seeds_shop1
    heart
  • £  6.49 P & P: £  0.00
    at b.p.r-trading
    heart
  • £  3.08 P & P: £  0.00
    at home_and_travel
    heart
  • £  5.99 P & P: £  0.00
    at aurouzuk
    heart
  • £  5.29 P & P: £  0.00
    at heavenstore
    heart
  • £  2.95 P & P: £  0.00
    at darwinstore
    help **** FREE Daily 1st Class Posting - GET IT FAST **** heart
  • £  4.98 P & P: £  0.00
    at caspertradingcoltd16
    heart
  • £  3.95 P & P: £  0.00
    at buy_gadgets
    help 100% BRAND NEW✔HIGH QUALITY✔FAST SHIPPING✔1 YR WARRANTY heart
  • £  2.95 P & P: £  0.00
    at darwinstore
    help ***** FREE Credit Card Magnifier with each order ***** heart
  • £  2.49 P & P: £  0.00
    at click-buy-send
    heart
  • £  3.99 P & P: £  0.00
    at gadgetcking
    heart
  • £  11.95 P & P: £  0.00
    at worthydealer
    heart
  • £  1.75 P & P: £  0.00
    at darwinstore
    heart
  • £  2.99 P & P: £  0.00
    at gadgetcking
    heart
  • £  1.65 P & P: £  0.00
    at heavenstore
    heart
  • £  1.65 P & P: £  0.00
    at heavenstore
    heart
  • £  4.99 P & P: £  0.00
    at av4all
    heart
  • £  5.99 P & P: £  0.00
    at new-chanell
    heart
  • £  2.49 P & P: £  0.00
    at new-chanell
    heart
  • £  6.97 P & P: £  0.00
    at magnifying.glasses.and.tools
    heart
  • £  1.50 P & P: £  2.99
    at The Works
    help Details: A fantastic value magnifying glass with plastic handle. Ideal for: Perfect for map reading, hobby, art and craft applications, daily use and more. Measures: 19cm x 9.5cm heart
  • £  15.50 P & P: £  1.95
    at allbeauty.com
    help See the light! Isolate even the finest hair for precise, easy tweezing with this optically correct and lighted 10X magnifying mirror. Clear from edge-to-edge with no distortion so you won't miss a hair. Tips: Great for any precision tasks, from tweezing to make-up application to contact lens insertion. Suction cups attach to any smooth surface. Moisten cups for stronger hold. heart
  • £  14.40 P & P: £  1.95
    at allbeauty.com
    help Tweezerman's powerful optically correct 12X magnifying mirror lets you isolate the finest hair for precise, easy tweezing every time. Suction cups on back of mirror attach to any smooth surface. Also great for makeup application and contact lens insertion. Portable and practical. Perfect for home or travel. heart
  • £  9.99 P & P: £  0.00
    at wecostlessstore
    heart
  • £  82.50 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
  • £  4.99 P & P: £  0.00
    at thinkprice
    heart
  • £  99.99 P & P: £  7.99
    at Tile Mountain
    help IMPORTANT Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the product to crack. To prevent product failures ensure that:  All fitting steps are completed. A space of at least 2mm is left between the product and all surfaces. The gaps must be filled with silicone. The surface to which the product is applied is flat, variations in level in excess of 5mm should be packed with silicone prior to fitting. You do not use any form of adhesive other than silicone as certain adhesives will degrade the finish of the glass.   SAFE HANDLING OF GLASS All products are supplied with a safety backing but we recommend that glass is handled with care and in particular eye protection and suitable gloves should be worn.   AFTER CARE Do not use abrasive cleaners. For the best results use: Hot water with a mild soap detergent.   BEFORE YOU START Check that all components are present. Ensure that you have all tools to hand.   TOOLS NEEDED TO FIT THE SPLASH BACK Tape measure. Sealant gun. Silicone sealant - only use LM or AC. (Our Splashbacks are self adhesive, the Silicone Sealant is for sealing gaps only) 2mm tile spacers.   CHECK LIST Do you have everything you need to start the job? Check that the splash back fits. Ensure that your worktop is fitted securely. Check that your worktop is level. Clear all dust from the worktop. Ensure that your hob is fitted in accordance with the manufacturer's instructions and that the clearance between the hob and splash back complies with the appliance manufacturer's instructions. Make sure that your extractor is securely fitted in accordance with the manufacturer's instructions.   DO NOT Fit the splash back directly onto a hob or work surface useing spacers. Place the splash back on its edge on any hard surface during the fitting process. Use the product until the silicone has cured (follow the manufacturer's instructions). heart
Page: 1 2 3 4 5 6 7 8 9 10 NEXT

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on large magnifying glass

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.