Results for "outside water tap cover"

Filter by:

  • £  11.98 P & P: £  0.00
    at eBay.co.uk
    help benefits insulates outdoor taps to prevent freezing when the temperature drops below zero quick and easy to fit and to remove when using tap prevents water in tap freezing backwards cutting off mains water supply grey rigid polystyrene body encloses tap and tap plumbing joint foam end contours uneven wall surfaces barrier to freezing air and water entry fitting 1 unfold hook to straighten bolt 2 position hook around tap neck or handle 3 holding the end of the string push cover against the wall 4 heart
  • £  59.95 P & P: see site
    at OurTaps
    help Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Wall-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with standard wall-mounting connections including two 'S Tails', two Chrome Cover Plates and 2 filter washers. The distance between the inlet centres at the back of the taps is the UK standard 150mm / 15cms. The centre of the shower outlet, with the chrome cover plates attached, is some 65mm from the wall. The left control knob (as you look at the front of the taps) controls the water on/off. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap/Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  14.99 P & P: £  0.00
    at eBay.co.uk
    help foxrate seller widget tag foxrate swf professional thru wall garden outside tap kit complies with water regulations this kit comes complete with gt 7 1 x hose union outside tap with double check valve 1 x 15 mm thru wall flange 365 mm long 1 x 15 mm compression tee with easy turn isolating valve 3 x 2 x 8 brass countersunk slotted fixing screws 3 x brown plastic plugs 1 x roll ptfe tape if this kit is not exactly what you need check out my other items the kit provides a professional way to add a heart
  • £  59.95 P & P: see site
    at OurTaps
    help Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Wall-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with standard wall-mounting connections including two 'S Tails', two Chrome Cover Plates and 2 filter washers. The distance between the inlet centres at the back of the taps is the UK standard 150mm / 15cms. The centre of the shower outlet, with the chrome cover plates attached, is some 65mm from the wall. The left control knob (as you look at the front of the taps) controls the water on/off. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap/Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  18.99 P & P: £  0.00
    at eBay.co.uk
    help foxrate seller widget tag foxrate swf professional thru wall garden outside tap kit complies with water regulations this kit comes complete with gt 5 1 x hose union outside tap with double check valve 1 x 15 mm compression tee with easy turn isolating valve 1 x 15 mm thru wall flange 365 mm long 3 x 2 x 8 brass countersunk slotted fixing screws 3 x brown plastic plugs 1 x 300 mm standard copper pipe 1 x roll ptfe tape 1 x 15 mm brass compression elbow if this kit is not exactly what you need che heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  12.95 P & P: £  0.00
    at eBay.co.uk
    help foxrate seller widget tag foxrate swf kevinid 2 k store lockshield 1 2 hose union bib tap outside garden tap secure against water loss the removable handle prevents deliberate turning on of the tap unnoticed and therefore avoids huge water bills if the tap is in a accessible area heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 29cms long with 'easy-clean' rubber nozzles & on/off switch). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  8.95 P & P: £  0.00
    at eBay.co.uk
    help welcome to the plumbinbitsuk store insulated outside garden tap cover easy to install tap can be used with cover on fits most bs 1010 1 2 outside taps postage we endeavour to send all orders placed with us out the same day for orders placed before 2 pm monday to friday only we inspect each item before despatch and send in quality packaging to ensure it arrives to you in perfect condition our listings come with various services to suit your needs and requirements standard postage is free within t heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting connections kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 16 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  16.50 P & P: £  0.00
    at eBay.co.uk
    help taplock taplock by spinsecure has a unique free spinning design in order to secure taps and hose bibbs from miscellaneous vandalism unauthorised use tampering and water theft taplock is made of a hard non ferrous zinc alloy to prevent rusting and uses a magnetic locking system that is fully weather and tamper proof unlike other security devices taplock can be keyed alike so that multiple taps can be secured with the convenience of having only one key each magnetic key is coded to match the lock heart
  • £  65.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER MIXER WITH HAND SHOWER SET AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. Included with this is a Chrome Handheld Shower Head (3 spray positions, 'plastichrome'), a 1.5m Flexible hose and a wall-mounted bracket ('plastichrome') for the shower head. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  5.99 P & P: £  0.00
    at eBay.co.uk
    help here we have a medium size chrome lever tap suitable for many purposes including garden watering barrel outdoor hose pipe water barrel brass butt keg with special hose connector nozzle to give a good grip for water pipes nice new quality item free postage quick delivery brand new in the box save a fortune on the retail price limited stocks inkfrog analytics heart
  • £  999.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2200w - Standby power consumption 10w - Heat up time from cold 20 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  70.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL STYLE VICTORIAN BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH SHOWER MIXER TAPS: Traditional Victorian Style Wall-mounted Bath/Shower Mixer Taps. The Body is Made from Brass with a polished 'mirror' chrome finish. The taps come with a Chrome handheld Shower Head with White handle & 1.5m Flexible Hose. It includes wall-mounting fittings (S Tails, Chrome cover plates & washers). The taps can either be fitted to a wall or vertical surface of a bath. Secure copper pipework is recommended, or alternatively a fixing plate kit may be required. The Distance between centres of the hot & cold inlets is 150mm (UK standard). From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The taps use 1/4 Turn Ceramic disc technology. The minimum water pressure recommendedis 1 bar. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  69.95 P & P: see site
    at OurTaps
    help DECK-MOUNTED THERMOSTATIC BATH SHOWER MIXER TAPS. Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Deck-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. NB: To achieve 0.5 bars of pressure with a gravity tank you need a height drop of some 5 metres. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with Deck-mounting 'legs' which are attached to the rear of the taps using the nuts on the back of the taps. The distance between the centres of the 2 nuts is 150mm, however the distance between the inlet centres at the base of the 'pillar' legs is some 180mm (UK standard). The legs come with securing nuts/washers. The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  46.95 P & P: see site
    at OurTaps
    help 'COMBO' WITH A SET OF MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A MATCHING SINGLE LEVER BASIN MONOBLOC MIXER. 1. BATH/SHOWER TAPS: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. NB. It is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. It is also possible to convert these bath taps into Deck-mounted ones by purchasing a set of Chrome Deck-mounting 'legs'. The distance between the centres at the base of the legs is approx 180mm / 18cms. They are solidly made from brass/chrome. To purchase, please see the Accessories section. 2. BASIN MONOBLOC MIXER TAPS: This Tap uses 1/4 Turn Ceramic Disc Technology with a single lever operation. The lever moves left/right for the temperature and up/down for on/off. The body is made from Brass with a polished 'mirror' Chrome Finish and the spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height is some 17 cms and the spout reaches some 9.5 cms from the body. The height from the base to the spout is 8.5 cms and the diameter of the body is 4.8 cms (the 'plinth' section is 5.2 cms). 0.5 bar water pressure is recommended. It includes 2 flexible hoses (BS Standard connections) along with fittings. There is a red/blue hot/cold indicator underneath the lever. heart
  • £  46.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Again, see accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  44.95 P & P: see site
    at OurTaps
    help Traditional Victorian Style Wall-mounted Bath/Shower Mixer Taps. The Body is Made from Brass with a polished 'mirror' chrome finish. The taps come with a Chrome handheld Shower Head with White handle & 1.5m Flexible Hose. It includes wall-mounting fittings (S Tails, Chrome cover plates & washers). The taps can either be fitted to a wall or vertical surface of a bath. Secure copper pipework is recommended, or alternatively a fixing plate kit may be required. The Distance between centres of the hot & cold inlets is 150mm (UK standard). From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The taps use 1/4 Turn Ceramic disc technology. The recommended operating water pressure is 1 to 5 bars. We also sell the Deck-mounted version of this tap (comes with a pair of Deck-mounting legs - see item order number 49). heart
  • £  1,099.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2900w - Standby power consumption 10w - Heat up time from cold 10 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  1,149.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2900w - Standby power consumption 10w - Heat up time from cold 10 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  74.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface around the edge of a bath). The body and fittings are solidly made from Brass with a polished 'mirror' Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  1,099.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2900w - Standby power consumption 10w - Heat up time from cold 10 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  80.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE DECK-MOUNTED BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface or ledge around a bath). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The recommended operating water pressure is 1 to 5 bars. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  1,149.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2900w - Standby power consumption 10w - Heat up time from cold 10 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes - Please note: - This tap is chrome with a stainless steel effect finish heart
  • £  1,099.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2900w - Standby power consumption 10w - Heat up time from cold 10 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  1,049.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2200w - Standby power consumption 10w - Heat up time from cold 20 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes - Please note: - This tap is chrome with a stainless steel effect finish heart
  • £  1,099.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2900w - Standby power consumption 10w - Heat up time from cold 10 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes - Please note: - This tap is chrome with a stainless steel effect finish heart
  • £  999.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2900w - Standby power consumption 10w - Heat up time from cold 10 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  1,049.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2200w - Standby power consumption 10w - Heat up time from cold 20 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes - Please note: - This tap is chrome with a stainless steel effect finish heart
  • £  19.50 P & P: see site
    at OurTaps
    help A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  969.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2200w - Standby power consumption 10w - Heat up time from cold 20 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  969.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2200w - Standby power consumption 10w - Heat up time from cold 20 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET: 1. '5 HOLE' DECK-MOUNTED DESIGNER BATH TAPS WITH PULL-OUT HAND SHOWER. Specification and Features: The set is solidly made from Brass with a polished Mirror Chrome finish. Individual hot and cold controls with 1/4 turn ceramic disc technology. Diverter control to enable switching between the bath spout and the hand shower. The height of the spout is some 26 cms and it has a reach of some 16 cms. There is a Pull out hand shower head on a 1.5m flexi hose. The hand shower is a Square 'Pencil' style one measuring some 20 cms long by 3 X 1 cms. The set comes with flexi hose connections. The minimum recommended water pressure 1 bar. 2. MONO MIXER BASIN TAP: The body is very solidly made from Brass with a highly polished Chrome Finish. The spout has a Swivel action, so it can be used with a dual sink/basin. It has Dual levers which use 1/4 Turn Ceramic Disc Technology. The overall height is approx 34 cms & the spout has a reach of some 17 cms. The tip of the spout is some 27 cms high from the base. The widest part of the body section is 12cms by 5.5 cms deep. It comes with flexible hoses and fittings. The recommended water operation pressure is between 1 to 5 bars. heart
  • £  1,049.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2200w - Standby power consumption 10w - Heat up time from cold 20 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  999.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2200w - Standby power consumption 10w - Heat up time from cold 20 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  64.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are wall-mounted (i.e. they fit against a vertical surface). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a wall-mounting kit with BS Standard size 'S Tail' Connectors and Chrome Cover plates . The distance between inlet centres is the UK standard 150mm/15cms. The Tails allow a variation of approx +/- 2 cms to this to assist with fitting. These Taps can also usually be used with the vertical surface of a free standing bath. Secure pipework is necessary for fitting, or a wall fixing plate kit may be required. From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  1,079.00 P & P: £  0.00
    at Appliance City
    help Dispenses purified water at 100°C from the Quooker tap and hot water from an existing tap - 7 litre stainless steel tank with vacuum insulation - Height adjustable tap - Childproof push-and-turn insulated handle - Thermostatically controlled valve for constant hot water temperature - Hot water temperature setting range: 50°C to 65°C - Highly energy efficient - Power 2200w - Standby power consumption 10w - Heat up time from cold 20 minutes - 10 bar maximum pressure - High temperature activated carbon water filter with 5 year lifespan - Available in 4 styles and 6 finishes heart
  • £  6.98 P & P: £  0.00
    at 1ststopironmongeryandhardware
    heart
  • £  8.75 P & P: £  0.00
    at nichols_pickles
    help THINSULATE INSULATED COVER heart
  • £  5.39 P & P: £  2.49
    at 1ststopironmongeryandhardware
    heart
  • £  8.99 P & P: £  0.00
    at themightyboosh0
    heart
  • £  9.00 P & P: £  0.00
    at harrisonsforge
    heart
  • £  5.99 P & P: £  0.00
    at Amazon Marketplace
    help Westwoods Padded Outside Tap Jacket Tap Frost Protector Cover Velcro Straps Size approx: 22cm x 15cm x 3cm Universal Ideal for any outside tap. heart
  • £  20.89 P & P: £  4.75
    at Amazon Marketplace
    help How do I attach my hosepipe / garden hose to my mixer tap indoors? With this brilliant hosepipe to mixer tap connector and permanent tap aerator all in one! Simply screw the tap aerator onto your mixer tap spout, and the hosepipe connector onto your Hozelock Connector (you only have to fit this once). Then heart

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on outside water tap cover

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.