Results for "pegler taps spare parts"

Filter by:

  • £  259.00 P & P: see site
    at Amazon
    heart
  • £  29.50 P & P: £  4.90
    at eBay.co.uk
    help leoperdas store industrial domestic kitchen pegler lever pillar hot cold sink tap pair description a competitively priced range of basin bath and sink taps and mixers suiteble for domestic water supplies offering apractical alternative for eldery or disabled people te easily operated leaver fully opens and closes the tap within quarter turn fitted on aspindle allowing a varietty of fixing positions to suit the area of use and individual requirements pegler taps are recognised throughout the indu heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 29cms long with 'easy-clean' rubber nozzles & on/off switch). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  6.43 P & P: £  0.00
    at eBay.co.uk
    help shop categories cordless power tools cordless drill drivers corded power tools corded multi function tools air tools power tool accessories hand tools measuring precision woodworking tools consumables hardware builsing materials fixings fasteners tool boxes storage home leisure workwear safety trousers shorts boots shoes ear eye protection clearance monument 501 x spare tap reseater cutter 5 8 in now only 6 43 all of our items are brand new uk stock price includes vat full vat invoice supplied i heart
  • £  70.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL STYLE VICTORIAN BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH SHOWER MIXER TAPS: Traditional Victorian Style Wall-mounted Bath/Shower Mixer Taps. The Body is Made from Brass with a polished 'mirror' chrome finish. The taps come with a Chrome handheld Shower Head with White handle & 1.5m Flexible Hose. It includes wall-mounting fittings (S Tails, Chrome cover plates & washers). The taps can either be fitted to a wall or vertical surface of a bath. Secure copper pipework is recommended, or alternatively a fixing plate kit may be required. The Distance between centres of the hot & cold inlets is 150mm (UK standard). From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The taps use 1/4 Turn Ceramic disc technology. The minimum water pressure recommendedis 1 bar. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  5.73 P & P: £  0.00
    at eBay.co.uk
    help worldwide shipping available fast secure dispatch home about us why buy from us shipping contact us 12 merchants 1 png ending soon hot items clearance amazing offers start shopping home draper spare jaws for 45698 schr 246 der ratchet t type tap wrench enlarge the image draper spare jaws for 45698 schr 246 der ratchet t type tap wrench free shipping low prices easy and secure ordering overview delivery in the box draper spare jaws for 45698 schröder ratchet t type tap wrench all of our items for heart
  • £  74.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface around the edge of a bath). The body and fittings are solidly made from Brass with a polished 'mirror' Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  5.73 P & P: £  0.00
    at eBay.co.uk
    help worldwide shipping available fast secure dispatch home about us why buy from us shipping contact us 12 merchants 1 png ending soon hot items clearance amazing offers start shopping home draper spare jaws for 45680 schr 246 der ratchet t type tap wrench enlarge the image draper spare jaws for 45680 schr 246 der ratchet t type tap wrench free shipping low prices easy and secure ordering overview delivery in the box draper spare jaws for 45680 schröder ratchet t type tap wrench all of our items for heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  28.08 P & P: £  0.00
    at eBay.co.uk
    help look at our feedback our feedback rate is a guarantee high average for high performance it s good to see you here to give you a great quality of service and to assist in your needs look the offer of a wide range of quality products and add us pegler belmont b 4451 4 15 mm angle horizontal valve pegler belmont b 4451 4 15 mm angle horizontal we try to offer you the best price on the pegler belmont b 4451 4 15 mm angle horizontal trv amp amp amp amp amp amp amp amp amp amp amp amp amp amp amp amp heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  10.99 P & P: £  0.00
    at eBay.co.uk
    help kitchen tap replacement spare pull out spout head push button spray function quality chrome colour finish on plastic british standard threaded male connection for attaching to the flexible pull out hose of a pull out spout kitchen tap only the replacement spare spout head is for sale here see the picture tap not included only the pull out spout is on sale here powered by ebay turbo lister heart
  • £  80.95 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE DECK-MOUNTED BATH/SHOWER MIXER TAPS AND MONOBLOC BASIN MIXER TAP. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are deck-mounted (i.e. they fit onto the flat horizontal surface or ledge around a bath). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a pair of deck-mounting legs or 'pillars'. The distance between inlet centres at the base of these legs is the UK standard 180mm/18cms. From the centre of the legs/pillars to the tip it measures approx 19 cms. The centre of the spout tip is some 14 cms from the centre of the body. The height from the base of the legs to the top of the hand shower in its cradle is 24 cms. The spout drop 4 cms from where the legs are seated. The recommended operating water pressure is 1 to 5 bars. The distance between the centres of the inlet nuts at the back is 150mm. The nuts are 3/4" BSP (1" diameter inside). The recommended operating water pressure is 1 to 5 bars. 2. MONOBLOC BASIN MIXER TAPS: Specification & Features: The Body is solidly made from Brass with a polished Chrome Finish. The Dual Cross Handles are conventionally operated and are marked with 'H' and 'C'. The taps are operated by 1/4 Turn Ceramic Discs. It comes with Flexible hoses and BS Standard fittings. The tap stands around 11cms high and has a reach of approx 10cms from the centre of the taps body (at the base). The taps have a small hole in the back of the body for a pop-up waste control lever. The minimum water pressure is 0.5 bar, although 1 bar is recommended. Pop-up Wastes for the basin tap are available from the 'Accessories' section. heart
  • £  81.01 P & P: £  0.00
    at eBay.co.uk
    help 0845 351 3517 opening times 9 am 5 30 pm monday saturday daiwa tournament airity tap spares spare sections for the daiwa tournament airity tap pole call now for expert advice 0845 351 351 7 we can accept all credit debit cards over the phone we accept about us ted carter s is a family run fishing tackle business established in 1961 originally run by ted and his wife hilda it has continually grown in size and now has around 20 staff for the last 14 years ted s son graham and his business partner heart
  • £  49.95 P & P: see site
    at OurTaps
    help These Thermostatic Bath/Shower Mixer Taps are Wall-mounted and have a shower hose connection. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1.

    heart
  • £  29.95 P & P: see site
    at OurTaps
    help MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose which is underneath the spout. It has a diverter control knob on top of the spout. It includes Wall Mounting connections kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 16 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. We sell Shower sets which will go with this Mixer. We also sell deck-mounting legs which convert this tap to 'deck-mounted'. Please see the Accessories section. heart
  • £  65.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER MIXER WITH HAND SHOWER SET AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. Included with this is a Chrome Handheld Shower Head (3 spray positions, 'plastichrome'), a 1.5m Flexible hose and a wall-mounted bracket ('plastichrome') for the shower head. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Please see the Accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  119.95 P & P: see site
    at OurTaps
    help COMBO SET: 1. '5 HOLE' DECK-MOUNTED DESIGNER BATH TAPS WITH PULL-OUT HAND SHOWER. Specification and Features: The set is solidly made from Brass with a polished Mirror Chrome finish. Individual hot and cold controls with 1/4 turn ceramic disc technology. Diverter control to enable switching between the bath spout and the hand shower. The height of the spout is some 26 cms and it has a reach of some 16 cms. There is a Pull out hand shower head on a 1.5m flexi hose. The hand shower is a Square 'Pencil' style one measuring some 20 cms long by 3 X 1 cms. The set comes with flexi hose connections. The minimum recommended water pressure 1 bar. 2. MONO MIXER BASIN TAP: The body is very solidly made from Brass with a highly polished Chrome Finish. The spout has a Swivel action, so it can be used with a dual sink/basin. It has Dual levers which use 1/4 Turn Ceramic Disc Technology. The overall height is approx 34 cms & the spout has a reach of some 17 cms. The tip of the spout is some 27 cms high from the base. The widest part of the body section is 12cms by 5.5 cms deep. It comes with flexible hoses and fittings. The recommended water operation pressure is between 1 to 5 bars. heart
  • £  84.95 P & P: see site
    at OurTaps
    help Modern style Deck-mounted/Pillar Bath/Shower Mixer Taps with Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. These taps use 1/4 Turn Ceramic Disc Technology. The Taps come with a slimline 'Pencil' Handheld Head (plastichrome) & Flexible Hose. The spout swivels and has a mesh filter for smoother water flow. There is a 'diverter' lever on the lower central section of the body so you can switch the water between the spout and the shower hose. The required minimum water pressure is 0.5 bar, although 1+ bars is recommended (max 5 bars). The distance between the inlet centres is the UK standard 18 cms (180mm). The Tap handles are some 130mm high. The overall height is some 29 cms and centre of the tip of the spout is approx 15 cms from the centre of the body. The metal flexi hose measures 1.5 metres and there is a fixed wall mounted bracket (plastichrome) for the 'Pencil' shower head. The threaded base sections are approx 48mm long and are 3/4" BSP size (measure 1" diameter outside). Securing nuts/washers are supplied. heart
  • £  46.95 P & P: see site
    at OurTaps
    help 'COMBO' WITH A SET OF MODERN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A MATCHING SINGLE LEVER BASIN MONOBLOC MIXER. 1. BATH/SHOWER TAPS: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 15 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. NB. It is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. It is also possible to convert these bath taps into Deck-mounted ones by purchasing a set of Chrome Deck-mounting 'legs'. The distance between the centres at the base of the legs is approx 180mm / 18cms. They are solidly made from brass/chrome. To purchase, please see the Accessories section. 2. BASIN MONOBLOC MIXER TAPS: This Tap uses 1/4 Turn Ceramic Disc Technology with a single lever operation. The lever moves left/right for the temperature and up/down for on/off. The body is made from Brass with a polished 'mirror' Chrome Finish and the spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height is some 17 cms and the spout reaches some 9.5 cms from the body. The height from the base to the spout is 8.5 cms and the diameter of the body is 4.8 cms (the 'plinth' section is 5.2 cms). 0.5 bar water pressure is recommended. It includes 2 flexible hoses (BS Standard connections) along with fittings. There is a red/blue hot/cold indicator underneath the lever. heart
  • £  99.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a matching Extra Large 'Multi-Spray' Handheld Shower Head (6" diameter, 29cms long, rubber nozzles, on/off switch, and made from 'plastichrome'), a 1.7m Flexi hose and an adjustable shower rail with sliding holder for the shower head. The Adjustable Shower Rail measures approx 58cms in length and the body is made of brass with a chrome finish. The ends, sliding holder and soap dish are plastichrome. It comes with fittings. heart
  • £  89.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and an Extra Large 'Plastichrome' Multi spray Handheld Shower Head (6" diameter head, approx 23cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  39.95 P & P: see site
    at OurTaps
    help MODERN STYLE DECK MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished 'mirror' Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Deck-mounting legs which have a distance between the centres at the base of the legs of 180mm/18cms. A minimum of 0.5 bar water pressure is recommended. It is also possible to purchase a Chrome Handheld Shower Head), a 1.5m Flexible hose and a wall-mounted bracket for the shower head for this item. Please see the Accessories Section. heart
  • £  84.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and 'Pencil' style Handheld Shower Head approx 20cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  59.95 P & P: see site
    at OurTaps
    help Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Wall-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with standard wall-mounting connections including two 'S Tails', two Chrome Cover Plates and 2 filter washers. The distance between the inlet centres at the back of the taps is the UK standard 150mm / 15cms. The centre of the shower outlet, with the chrome cover plates attached, is some 65mm from the wall. The left control knob (as you look at the front of the taps) controls the water on/off. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap/Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  49.95 P & P: see site
    at OurTaps
    help MODERN SQUARE STYLE DECK-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It comes with a set of Deck-mounting legs (pillars) which have securing nuts on the threaded bases and chrome plinths. The distance between the inlet centres at the base of the legs is approx 18cms (180mm). The legs are approx 7cms tall. The taps are 25 cms wide (including the lever). The main body is 4.5 x 4.5 x 22 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. Hand Shower Sets are also available with square style handhelds - see the Shower Accessories Section. heart
  • £  69.95 P & P: see site
    at OurTaps
    help DECK-MOUNTED THERMOSTATIC BATH SHOWER MIXER TAPS. Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Deck-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. NB: To achieve 0.5 bars of pressure with a gravity tank you need a height drop of some 5 metres. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with Deck-mounting 'legs' which are attached to the rear of the taps using the nuts on the back of the taps. The distance between the centres of the 2 nuts is 150mm, however the distance between the inlet centres at the base of the 'pillar' legs is some 180mm (UK standard). The legs come with securing nuts/washers. The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  39.95 P & P: see site
    at OurTaps
    help MODERN SQUARE STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS. Specification/Features: This Tap uses 1/4 Turn Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It comes with Wall-Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall (with the chrome cover plates fitted) measures some 20 cms. The taps are 25 cms wide (including the lever). The main body is 4.5 x 4.5 x 22 cms. A minimum of 0.5 bar water pressure required, although 1+ bar is recommended. Hand Shower Sets are also available with square style handhelds - see the Shower Accessories Section. heart
  • £  84.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and a 'Plastichrome' Multi spray Handheld Shower Head (approx 23cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  99.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a matching Extra Large 'Multi-Spray' Handheld Shower Head (6" diameter, 23cms long, rubber nozzles, and made from 'plastichrome'), a 1.7m Flexi hose and an adjustable shower rail with sliding holder for the shower head. The Adjustable Shower Rail measures approx 58cms in length and the body is made of brass with a chrome finish. The ends, sliding holder and soap dish are plastichrome. It comes with fittings. heart
  • £  59.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  94.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and 'Pencil' style Handheld Shower Head approx 20cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  46.95 P & P: see site
    at OurTaps
    help COMBO WITH A SET OF MATCHING BATH/SHOWER AND BASIN MONOBLOC SINGLE LEVER MIXER TAPS. 1. Wall-mounted Bath/Shower Mixer Taps: This Tap uses Single Lever Ceramic Disc Technology. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. There is a connection for the shower hose is underneath the spout, with a diverter control knob on top of the spout. It includes Wall Mounting attachments kit with 'S Tail' Connectors & Chrome cover plates. The distance between the inlet centres is the UK standard 15cms (150mm). From the tip of the spout to where the taps join the wall is some 17 cms. A minimum of 0.5 bar water pressure is required, although operating between 1to 5 bar is recommended. NB. Please note that it is possible to purchase a Chrome Handheld Shower Head (3 spray positions), a 1.5m Flexible hose and a wall-mounted bracket for the shower head. Please see the Accessories section. We also have Chrome Deck-mounting Angles ('legs') which convert these to Deck-mounting taps. The distance between the centres at the base of the legs is 180mm / 18cms. They are solidly made from brass/chrome. Again, see accessories section. 2. Modern Monobloc Basin Mixer Taps: This Tap uses Ceramic Disc Technology. It has a single lever operation. The body is solidly made from Brass with a polished Chrome Finish. The spout has a diffuser mesh at the end for smoother water flow. It comes with hoses and fittings. The overall height when turned off is some 10 cms, and this increases to 13 cms when the lever is raised fully.. The spout reaches some 11 cms from centre of the body to the tip of the spout. The distance from the back of the tap body to the tip of the spout is 14 cms. A minimum of 0.5 bar of water pressure is required, although 1+ bar is recommended. NB. There is the option to add a Pop-up waste to this tap (the tap body has the small hole in the back for the connecting rod). To purchase, please see the accessories section. heart
  • £  64.45 P & P: see site
    at OurTaps
    help COMBO SET WITH TRADITIONAL VICTORIAN STYLE WALL-MOUNTED BATH/SHOWER MIXER TAPS & A PAIR OF INDIVIDUAL 'H' & 'C' BASIN TAPS. 1. BATH/SHOWER MIXER TAPS. Specification & Features: Whilst this is a traditional Victorian Style set of Bath Shower Mixer Taps, they have the benefits of 1/4 turn Ceramic Disc Technology. The taps are wall-mounted (i.e. they fit against a vertical surface). The body and fittings are solidly made from Brass with a polished Chrome finish. They have Cross handles marked with 'H' and 'C', and come with Chrome Handheld Shower Head with a white handle, which sits on a Cradle, and a 1.5m Flexible Hose. The set includes a wall-mounting kit with BS Standard size 'S Tail' Connectors and Chrome Cover plates . The distance between inlet centres is the UK standard 150mm/15cms. The Tails allow a variation of approx +/- 2 cms to this to assist with fitting. These Taps can also usually be used with the vertical surface of a free standing bath. Secure pipework is necessary for fitting, or a wall fixing plate kit may be required. From the wall to the tip of the spout, it measures some 19 cms (with the chrome cover plates fitted). The centre of the spout tip is some 14 cms from the centre of the body. The recommended operating water pressure is 1 to 5 bars. 2. BASIN TAPS A pair of Traditional Victorian style individual Hot and Cold Basin Taps, marked with 'H' and 'C'. They are made from Brass with Chrome Finish and are operated using 1/4 turn ceramic disc technology. The overall height of each tap is some 8cms and from the body to the tip of the spout it is approx 10cms. The threaded tails are 1/2" BSP and measure 43mm long. The base of the body is approx 40mm across. Each tap has a securing nut and washer. A minimum of 0.5 bars of water pressure is required. heart
  • £  75.00 P & P: see site
    at OurTaps
    help MATCHING 'COMBO' SET WITH QUALITY BATH PILLAR MIXER TAPS AND A PAIR OF BASIN HOT AND COLD TAPS. Specification & Features: 1. BATH PILLAR MIXER TAPS. Modern style Deck-mounted (Pillar style) Bath Mixer Taps which use 1/4 Turn Ceramic Disc Technology. The body is solidly made of brass and finished with highly polished Chrome. The 'Cross' style handles are Zinc Alloy. The spout has a mesh filter for smoother water flow. The recommended minimum water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. 2. BASIN TAPS: This is a pair of quality modern style bathroom basin Taps with 'X' handles. They are deck-mounted and they have a securing nut and washer on the threaded 'Tail' connections at the base (1/2" BSP). The bodies are solidly made of brass and finished with highly polished Chrome. The handles are zinc alloy, again finished in polished chrome. There is a diffuser in the end of the spouts for smooth water flow. The recommended minimum water pressure is 0.5 bars. The overall height of each tap is 11.5 cms and the spout reaches some 8.5 cms. They are operated using 1/4 Turn Ceramic Disc Technology. heart
  • £  25.00 P & P: see site
    at OurTaps
    help PAIR OF BASIN TAPS: Specification & Features: This is a pair of quality modern style bathroom basin Taps with 'X' handles. They are deck-mounted and they have a securing nut and washer on the threaded 'Tail' connections at the base (1/2" BSP). The bodies are solidly made of brass and finished with highly polished Chrome. The handles are zinc alloy, again finished in polished chrome. There is a diffuser in the end of the spouts for smooth water flow. The recommended minimum water pressure is 0.5 bars. The overall height of each tap is 11.5 cms and the spout reaches some 8.5 cms. They are operated using 1/4 Turn Ceramic Disc Technology. heart
  • £  90.00 P & P: see site
    at OurTaps
    help MATCHING 'COMBO' SET WITH QUALITY BATH/SHOWER MIXER TAPS AND A PAIR OF BASIN HOT AND COLD TAPS. Specification & Features: 1. BATH / SHOWER PILLAR MIXER TAPS. Modern style Deck-mounted (Pillar style) Bath / Shower Mixer Taps which use 1/4 Turn Ceramic Disc Technology. They come with a Handheld 'Pencil' Head & Flexible Hose. The body is solidly made of brass and finished with highly polished Chrome. The 'Cross' style handles are Zinc Alloy. The spout has a mesh filter for smoother water flow. There is a 'diverter' lever on the front of the body so you can switch the water between the spout and the shower hose. The recommended minimum water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. The hose measures 1.5 metres and there is a fixed wall mounted bracket for the 'Pencil' shower head. 2. BASIN TAPS: This is a pair of quality modern style bathroom basin Taps with 'X' handles. They are deck-mounted and they have a securing nut and washer on the threaded 'Tail' connections at the base (1/2" BSP). The bodies are solidly made of brass and finished with highly polished Chrome. The handles are zinc alloy, again finished in polished chrome. There is a diffuser in the end of the spouts for smooth water flow. The recommended minimum water pressure is 0.5 bars. The overall height of each tap is 11.5 cms and the spout reaches some 8.5 cms. They are operated using 1/4 Turn Ceramic Disc Technology. heart
  • £  75.00 P & P: see site
    at OurTaps
    help This is a 'Combo' set of quality modern style Deck-mounted 'Pillar' Bath Mixer Taps with a matching set of Monobloc Basin Mixer Taps. The Bath Pillar Taps are solidly made of brass and finished with highly polished Chrome. The handles are Zinc Alloy. They come with securing nuts. The recommended water pressure is 0.5 bar. The distance between the inlets is 18 cms (180mm). The tip of the spout is 24cms high and it has a reach of around 11 cms. The Monobloc Basin Mixer has dual 'X' handles. This Tap is deck-mounted and comes with a Pop-up waste, hoses/fittings. The body is solidly made of brass and finished with highly polished Chrome. There is a diffuser in the end of the spout for smooth water flow. The overall height is 22 cms and the spout reaches some 14 cms. Both Taps use Ceramic Disc Technology. heart
  • £  8.98 P & P: £  0.00
    at tap-magician
    help HALF AND QUARTER TURN AVAILABLE heart
  • £  11.98 P & P: £  0.00
    at tap-magician
    help HALF AND QUARTER TURN AVAILABLE heart
  • £  15.98 P & P: £  0.00
    at tap-magician
    help HALF AND QUARTER TURN AVAILABLE heart
  • £  11.98 P & P: £  0.00
    at tap-magician
    help HALF AND QUARTER TURN AVAILABLE heart
  • £  25.49 P & P: £  0.00
    at Amazon Marketplace
    help High quality chrome finish Wras approved 10 Year pegler warranty Ideal for low pressure systems and poor flow. Minimum bar pressure 0.1 bar Water out let Height 146mm Reach 78mm Mount holes 28mm x 2 Tail length 53mm Q.T Valves heart
  • £  28.49 P & P: £  0.00
    at Amazon Marketplace
    help A.170 B.180 C.164 D.144 heart

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on pegler taps spare parts

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.