Results for "thermostat danfoss"

Filter by:

  • £  119.99 P & P: see site
    at Amazon
    heart
  • £  209.95 P & P: see site
    at OurTaps
    help This is a 'Combo' set comprising of a 2 way 'Designer' Thermostatic Shower Valve, a Quality Rectangular Shower Head with a matching Chrome Arm and TWO sets of 3 Body Jets. 1. SHOWER VALVE: The 'All Metal' Thermostatic Shower Mixer Valve is Wall-mounted and attaches to concealed pipework. There are 2 outlets, independently controlled, and the body is very solidly made of brass and finished with highly polished Chrome. The 'female' inlets/outlets are 3/4" BSP, although they do detach to reveal male 1/2" BSP connections. The beautiful silver chrome 'mirror-like' Front Plate measures approx 17.5 cms wide by 32.5 cms high. The body of the Valve requires a minimum recess depth of 7.5cms. The upper and middle knobs control the 'On/Off' for the 2 outlets. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. The Quality Square Shower Head is very solidly made from brass with a polished Chrome finish. It measures some 8" X 8" (200 X 200mm) and has a swivel joint on top. It also has 'easy-clean' rubber nozzles. 3. Also supplied is a matching Wall-mounted square style Brass/Chrome Arm which measures some 40cms long and has 1/2" BSP threaded ends. It comes with Chrome cover plate. 4. The Water Massage Body Jets are wall-mounted. They are solidly made of Brass with a highly polished Chrome Finish. Each set of these Round Style 'Concealed' Body Jets has 3 individually adjustable outlets. Each outlet measures 5 cms in diameter and has 9 holes. The front cover plate is 30 cms high, 6 cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework and there are securing nuts to assist with installation. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  125.00 P & P: see site
    at Amazon
    heart
  • £  79.95 P & P: see site
    at OurTaps
    help Combination set with a 1-way Oval shaped Thermostatic Shower Mixer Valve, Rain Shower Head and Shower Arm. The main body of the Valve is made of Brass and it has a polished Chrome Finish. The front plate measures approx 17 X 18 cms. The inlets/outlet are 1/2" BSP (male) connections. The recommended water pressure for the Valve is between 1 - 5 bar and it has an operating temperature range of 20-50 deg C. The temperature is controlled thermostatically for comfort and safety. There is an override switch set at 38 degrees C. The matching Rain Chrome Shower Head is made from brass and measures 7.5" / 19cms across. It has easy clean rubber nozzles and there is a swivel joint on top. The Shower Arm is also brass and chrome, is wall-mounted and comes with a cover plate and securing nut. It measures some 35cms in length. heart
  • £  98.98 P & P: see site
    at Amazon
    help 24 Hour Programmable; 6 Time & Temperature Events per Day; Digital Display heart
  • £  164.95 P & P: see site
    at OurTaps
    help 'SQUARE' STYLE COMBO SHOWER SET: This is a combination set comprising of a '2 way' Designer Thermostatic Shower Valve, a Quality Square Shower Head and a matching Chrome Arm. It comes with an adjustable Shower Rail with Handheld Head, Flexible hose and Wall outlet. 1. SHOWER VALVE: The 'All Metal' Thermostatic Shower Mixer Valve is Wall-mounted and attaches to concealed pipework. There are 2 outlets, independently controlled, and the body is very solidly made of brass and finished with highly polished Chrome. The 'female' inlets/outlets are 3/4" BSP, although they do detach to reveal male 1/2" BSP connections. The beautiful silver chrome 'mirror-like' Front Plate measures approx 17.5 cms wide by 32.5 cms high. The body of the Valve requires a minimum recess depth of 7.5cms. The upper and middle knobs control the 'On/Off' for the 2 outlets. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. The Quality Square Shower Head is very solidly made from brass with a polished Chrome finish. It measures some 8" X 8" (200 x 200mm) and has a swivel joint on top. It also has 'easy-clean' rubber nozzles. 3. Also supplied is a matching Wall-mounted square style Brass/Chrome Arm which measures some 40cms long and has 1/2" BSP threaded ends. It comes with Chrome cover plate. 4. The Adjustable Shower rail measures approx 58 cms in height. The Rail is made of brass with a chrome finish. The ends and soap dish are Plastichrome and it comes with fittings. 5. The Flexible Shower Hose is 1.5m long and comes with a stylish 'Flat/Square' style Handheld Shower Head. The Handheld head measures 21 (L) x 3 (W) x 1 (D) cms and is solidly made of brass with a chrome finish. 6. The Wall Outlet is a round style and enables the connection between the Flexible hose and the concealed pipework. heart
  • £  139.95 P & P: see site
    at OurTaps
    help COMBO SET: 3 WAY THERMOSTATIC SHOWER VALVE, RAIN SHOWER HEAD & ARM, ADJUSTABLE RAIL, HANDHELD SHOWER HEAD, FLEXI HOSE PLUS WALL OUTLET, & 3 WATER MASSAGE BODY JETS. 1. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Diverter Valve is Wall-mounted and attaches to concealed pipework. There are 3 outlets, all controlled by 1 knob. The other knob controls the temperature. The body is very solidly made of brass. The inlets and outlets are 1/2" BSP (male). The beautiful exposed 'mirror-like' Front Plates behind the knobs are 8 cms in diameter. The body of the Valve requires a minimum recess depth of approx 7.5 cms. The recommended water pressure is between 1 and 5 bar. The Thermostatic control knob has a safety override stop set at 38 degrees C. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. RAIN SHOWER HEAD & ARM: The Quality Rain style Shower Head is solidly made from brass with a polished Chrome finish. It measures some 7.5" (19cms) in diameter and has a swivel joint on top. The Nozzles are easy clean rubber! A 'Wall-mounted' round style polished Chrome Arm (made from brass) comes with the Head. It has 1/2" BSP threaded ends (3/4" outside diameter). It comes with a Chrome cover plate & securing nut. It measures 35 cms long and has a drop of 7 cms. 3. ADJUSTABLE SHOWER RAIL, HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The Adjustable Shower Rail measures approx 58 cms in height. It's body is made of brass and the ends are 'plastichrome', all in a chrome finish. It comes with a soap dish and fittings. The Flexible Shower Hose is 1.5m long and comes with a stylish round 'pencil' style Handheld Shower Head. The Handheld head measures 21 cms (Length) x 3 cms (diameter) and is made of brass with a chrome finish. The Wall Outlet is also round style and enables the connection between the Flexible hose and the concealed pipework. 4. WALL MOUNTED WATER MASSAGE BODY JETS. Solidly made of Brass with a highly polished Chrome Finish, these Round 'Concealed' style Body Jets have 3 individually adjustable outlets. Each outlet measures 5 cms in diameter and has 9 holes. The front cover plate is 30 cms high, 6 cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework and there are securing nuts to assist with installation. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  100.00 P & P: see site
    at OurTaps
    help COMBO SET: SHOWER VALVE, HEAD & ARM. This 'All Metal' 1 way Thermostatic Shower Mixer Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass and finished with highly polished Chrome. The beautiful 'mirror-like' Front Plate measures 16cms wide by 23cms high. The body of the Valve requires a minimum recess depth of 6.1 cms. The recommended water pressure is between 1 and 5 bar, although it will work at 0.5 bar. The temperature is thermostatically controlled for comfort and safety, and has an override switch set at 38 degrees C. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. It comes with a Shower Head that is solidly made of Brass with a polished Chrome Finish. Sometimes called a 'Drench' or Rain Head, it measures approximately 19 cms (7.5") in diameter. There are Rubber Nozzles for easy cleaning and a swivel joint on top. The 'Wall-mounted' matching polished Chrome Arm (solidly made from brass) is some 35cms long. The threaded ends measure 3/4" in diameter. It comes with a Chrome Cover plate and securing nut. heart
  • £  105.00 P & P: see site
    at OurTaps
    help This is a combination set comprising of a 'Designer' Round Thermostatic Shower Valve, a Quality Rain Shower Head and a matching Chrome Arm. The 'All Metal' Thermostatic Shower Mixer Valve is Wall-mounted and attaches to concealed pipework. There are 2 outlets, independently controlled, and the body is very solidly made of brass and finished with highly polished Chrome. The inlets/outlets are male 1/2" BSP. The beautiful 'mirror-like' Front Plate measures some 22 cms by 22 cms. The body of the Valve requires a minimum recess depth of 6cms. The recommended water pressure is between 1 and 5 bar, although it will work at 0.5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. The Quality Rain or 'Drench' style Shower Head is very solidly made from brass with a polished Chrome finish. It measures some 7.5" across (19 cms) and has a swivel joint on top. There are also easy clean rubber nozzles! The Arm is solidly made of Brass and finished in matching Chrome and it comes with a chrome cover plate and securing nut. heart
  • £  199.95 P & P: see site
    at OurTaps
    help This is a 'Combo' set comprising of a 2 way 'Designer' Thermostatic Shower Valve, a Quality Rain Shower Head with a matching Chrome Arm and TWO sets of 3 Body Jets. 1. SHOWER VALVE: The 'All Metal' Thermostatic Shower Mixer Valve is Wall-mounted and attaches to concealed pipework. There are 2 outlets, independently controlled, and the body is very solidly made of brass and finished with highly polished Chrome. The 'female' inlets/outlets are 3/4" BSP, although they do detach to reveal male 1/2" BSP connections. The beautiful silver chrome 'mirror-like' Front Plate measures approx 17.5 cms wide by 32.5 cms high. The body of the Valve requires a minimum recess depth of 7.5cms. The upper and middle knobs control the 'On/Off' for the 2 outlets. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. The Quality Rain Shower Head is very solidly made from brass with a polished Chrome finish. It measures some 7.5" (19 cms) in diameter and has a swivel joint on top. The nozzles are easy clean rubber. 3. The round style Arm is solidly made of Brass and finished in matching Chrome and it comes with a chrome cover plate. It measures some 35 cms long and has a drop of 7 cms. 4. The Water Massage Body Jets are wall-mounted. They are solidly made of Brass with a highly polished Chrome Finish. Each set of these Round Style 'Concealed' Body Jets has 3 individually adjustable outlets. Each outlet measures 5 cms in diameter and has 9 holes. The front cover plate is 30 cms high, 6 cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework and there are securing nuts to assist with installation. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  199.95 P & P: see site
    at OurTaps
    help This is a 'Combo' set comprising of a 2 way 'Designer' Thermostatic Shower Valve, a Quality Star Shower Head with a matching Chrome Arm and TWO sets of 3 Body Jets. 1. SHOWER VALVE: The 'All Metal' Thermostatic Shower Mixer Valve is Wall-mounted and attaches to concealed pipework. There are 2 outlets, independently controlled, and the body is very solidly made of brass and finished with highly polished Chrome. The 'female' inlets/outlets are 3/4" BSP, although they do detach to reveal male 1/2" BSP connections. The beautiful silver chrome 'mirror-like' Front Plate measures approx 17.5 cms wide by 32.5 cms high. The body of the Valve requires a minimum recess depth of 7.5cms. The upper and middle knobs control the 'On/Off' for the 2 outlets. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. The Quality Star or 'Cloudburst' Shower Head is solidly made from brass with a polished Chrome finish. It measures some 8" in diameter (20 cms) and has a swivel joint on top. Water eminates from both the body and the prongs! 3. The round style Arm is solidly made of Brass and finished in matching Chrome and it comes with a chrome cover plate. It measures some 35 cms long and has a drop of 7 cms. 4. The Water Massage Body Jets are wall-mounted. They are solidly made of Brass with a highly polished Chrome Finish. Each set these Round Style 'Concealed' Body Jets has 3 individually adjustable outlets. Each outlet measures 5 cms in diameter and has 9 holes. The front cover plate is 30 cms high, 6 cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework and there are securing nuts to assist with installation. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  149.95 P & P: see site
    at OurTaps
    help COMBO SET: 3 WAY THERMOSTATIC SHOWER VALVE, SQUARE SHOWER HEAD, WALL-MOUNTED ARM, ADJUSTABLE RAIL, HANDHELD SHOWER HEAD, FLEXI HOSE WITH WALL OUTLET, & WATER MASSAGE BODY JETS. 1. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Diverter Valve is Wall-mounted and attaches to concealed pipework. There are 3 outlets, all controlled by 1 knob. The other knob controls the temperature. The body is very solidly made of brass. The inlets and outlets are 1/2" BSP (male). The beautiful exposed 'mirror-like' Front Plates behind the knobs are 8 cms in diameter. The body of the Valve requires a minimum recess depth of approx 7.5 cms. The recommended water pressure is between 1 and 5 bar. The Thermostatic control knob has a safety override stop set at 38 degrees C. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. SQUARE SHOWER HEAD & ARM: The Quality Square Shower Head is very solidly made from brass with a polished Chrome finish. It measures some 8" X 8" (20 x 20 cms), has a swivel joint on top and 'easy clean' rubber nozzles. Also supplied is a matching Wall-mounted square style Brass/Chrome Arm which measures some 40cms long and has 1/2" BSP threaded ends. It comes with Chrome cover plate. 3. ADJUSTABLE SHOWER RAIL, HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The Adjustable Shower rail measures approx 58 cms in height. The Rail is made of brass with a chrome finish. The ends and soap dish are Plastichrome and it comes with fittings. The Flexible Shower Hose is 1.5m long and comes with a stylish square style Handheld Shower Head. The Handheld head measures 20 (L) x 3 (W) x 1 (D) cms and is also made of brass with a chrome finish. The Wall Outlet is solidly made with a chrome finish and enables the connection between the Flexible hose and the concealed pipework. 4. WALL MOUNTED WATER MASSAGE BODY JETS. Solidly made of Brass with a highly polished Chrome Finish, these Round 'Concealed' style Body Jets have 3 individually adjustable outlets. Each outlet measures 5 cms in diameter and has 9 holes. The front cover plate is 30 cms high, 6 cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework and there are securing nuts to assist with installation. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  139.95 P & P: see site
    at OurTaps
    help COMBO SET: 3 WAY THERMOSTATIC SHOWER VALVE, STAR SHOWER HEAD & ARM, ADJUSTABLE RAIL, HANDHELD SHOWER HEAD, FLEXI HOSE PLUS WALL OUTLET, & 3 WATER MASSAGE BODY JETS. 1. SHOWER VALVE: This 'All Metal' Thermostatic Mixer Diverter Valve is Wall-mounted and attaches to concealed pipework. There are 3 outlets, all controlled by 1 knob. The other knob controls the temperature. The body is very solidly made of brass. The inlets and outlets are 1/2" BSP (male). The beautiful exposed 'mirror-like' Front Plates behind the knobs are 8 cms in diameter. The body of the Valve requires a minimum recess depth of approx 7.5 cms. The recommended water pressure is between 1 and 5 bar. The Thermostatic control knob has a safety override stop set at 38 degrees C. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. STAR SHOWER HEAD & ARM: The Quality Star or 'Cloudburst' style Shower Head is solidly made from brass with a polished Chrome finish. It measures some 8" (20cms) in diameter and has a swivel joint on top. Water eminates from both the body and the prongs! A 'Wall-mounted' round style polished Chrome Arm (made from brass) comes with the Head. It has 1/2" BSP threaded ends (3/4" outside diameter). It comes with a Chrome cover plate & securing nut. It measures 35 cms long and has a drop of 7 cms. 3. ADJUSTABLE SHOWER RAIL, HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The Adjustable Shower Rail measures approx 58 cms in height. It's body is made of brass and the ends are 'plastichrome', all in a chrome finish. It comes with a soap dish and fittings. The Flexible Shower Hose is 1.5m long and comes with a stylish round 'pencil' style Handheld Shower Head. The Handheld head measures 21 cms (Length) x 3 cms (diameter) and is made of brass with a chrome finish. The Wall Outlet is also round style and enables the connection between the Flexible hose and the concealed pipework. 4. WALL MOUNTED WATER MASSAGE BODY JETS. Solidly made of Brass with a highly polished Chrome Finish, these Round 'Concealed' style Body Jets have 3 individually adjustable outlets. Each outlet measures 5 cms in diameter and has 9 holes. The front cover plate is 30 cms high, 6 cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework and there are securing nuts to assist with installation. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  69.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a Multi function 'plastichrome' Handheld Shower Head, a 1.7m Stainless Steel Flexi hose and a 'plastichrome' adjustable/pivoting wall mounted bracket/holder for the shower head. heart
  • £  84.95 P & P: see site
    at OurTaps
    help Wall mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. It comes with standard wall-mounting connections including 'S Tails', Chrome Cover Plates & washers. The width is 28.5cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and 'Pencil' style Handheld Shower Head approx 20cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  79.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. It comes with a matching 'plastichrome' Handheld Shower Head (multi spray positions), a 1.7m Flexi hose and a 'plastichrome' adjustable wall mounted bracket/holder for the shower head. heart
  • £  94.95 P & P: see site
    at OurTaps
    help Deck mounted Thermostatic Bath Shower Mixer Taps with the shower hose connection underneath the spout. The body is made of brass with a polished Chrome finish. The handles are plastichrome. The taps come with a pair of Deck-mounting legs. The distance between the inlet centres at the base of the legs is approx 180mm. The recommended pressure is between 1 and 5 bar, although it will operate at a lower pressure 0.5 bars). NB: To achieve 0.5 bars of pressure with a gravity tank system you need a height drop of some 5 metres. The width is some 28cms, the height of main body is 4cms, the depth of the main body is 6cms and the spout reaches some 7cms. The distance between the inlet centres is 150 mm (UK Standard). The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. They come with a 1.7m Chrome Flexible Hose and 'Pencil' style Handheld Shower Head approx 20cms long with 'easy-clean' rubber nozzles). There is also an Adjustable 'sliding' Shower Rail which measures approx 58cms in length. The Rail itself is made of brass with a chrome finish. The ends, soap dish and sliding shower holder are 'plastichrome'. It comes with fittings. heart
  • £  69.95 P & P: see site
    at OurTaps
    help DECK-MOUNTED THERMOSTATIC BATH SHOWER MIXER TAPS. Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Deck-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. NB: To achieve 0.5 bars of pressure with a gravity tank you need a height drop of some 5 metres. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with Deck-mounting 'legs' which are attached to the rear of the taps using the nuts on the back of the taps. The distance between the centres of the 2 nuts is 150mm, however the distance between the inlet centres at the base of the 'pillar' legs is some 180mm (UK standard). The legs come with securing nuts/washers. The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  59.95 P & P: see site
    at OurTaps
    help Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Wall-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with standard wall-mounting connections including two 'S Tails', two Chrome Cover Plates and 2 filter washers. The distance between the inlet centres at the back of the taps is the UK standard 150mm / 15cms. The centre of the shower outlet, with the chrome cover plates attached, is some 65mm from the wall. The left control knob (as you look at the front of the taps) controls the water on/off. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Tap/Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  65.00 P & P: see site
    at OurTaps
    help This 'All Metal' Thermostatic Mixer Diverter Valve is Wall-mounted and attaches to concealed pipework. There are 4 outlet functions, all controlled by one 'diverter' knob. This control knob also controls the flow and the 'on/off'. The body is very solidly made of brass. The control knobs are also brass finished in chrome. The male inlets/outlets are 1/2" BSP (measure 3/4" across in diameter - outside). The 'mirror-chrome' Front Cover Plates behind the knobs are some 7 & 8 cms in diameter. The body of the Valve requires a minimum recess depth of approx 7 cms. The distance between the centres of the control knobs is 10cms. The recommended water pressure is between 1 and 5 bar. The temperature is controlled Thermostatically for comfort and safety, and there is a safety override stop switch set at 38 degrees C. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. heart
  • £  129.95 P & P: see site
    at OurTaps
    help This 'Designer' Shower set comprising of a 1 way (1 outlet) Thermostatic Valve, a quality Square shower Head and a matching chrome Ceiling Arm. 1. SHOWER VALVE: This is a solidly made 'All Metal' Thermostatic Mixer Valve. This includes the control knobs. The upper knob controls the water on/off using 1/4 turn Ceramic Disc Technology. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. There is one outlet ('1 way') for one shower function. The front plate is finished with highly polished silver 'mirror' Chrome (please note that the lines shown in the picture above are reflections!). The plate measures 17.5cms wide by 22.5cms high. The body of the Valve requires a minimum recess depth of 7.5cms. The inlets/outlet are male 1/2" BSP, however it comes with adaptors to convert the inlets/outlet to 3/4" BSP female ones. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following (subject to adequate water pressure): Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. SHOWER HEAD: It comes with a Shower Head that is very solidly made of Brass with a polished Chrome Finish. It measures some 8" X 8" (195 X 195mm) and there is a swivel joint on top. It also has 'easy-clean' rubber nozzles. 3. SHOWER ARM: Also supplied is a matching Ceiling-mounted Brass/Chrome Arm which measures some 15cms long and has 1/2" BSP threaded ends. It comes with Chrome cover plate. heart
  • £  69.00 P & P: see site
    at OurTaps
    help This is a Compact Thermostatic Shower Panel. It measures 42cms high by 27cms wide by 10cms deep (excludes controls). Simple to install (hangs on brackets & connect up the 2 flexible hoses that are supplied), it comes with 3 adjustable Massage Water Jets, and Hand-held Shower Head (with Flexible Hose & seperate wall-mounted holder). The temperature is controlled thermostatically for comfort and safety. There is an override switch set at 38 degrees C. The Panel is White and is made of a Quality Durable ABS (like a hard plastic) with polished Chrome controls/trim. The Nozzles are 'easy-clean' grey rubber. The recommended water pressure is 0.5 to 6 bar. heart
  • £  85.00 P & P: see site
    at OurTaps
    help This is a Compact Luxury Thermostatic Shower Panel Tower. It measures 42cms high by 27cms wide by 10cms deep (excludes controls). It is simple to install (hang it on the supplied brackets & connect up the 2 flexible hoses at the back). It comes with 3 adjustable Massage Water Jets, and fittings. It is controlled by a Diverter valve. The Panel itself is made of a Quality Durable ABS, in white, and has polished Chrome controls/trim. The Nozzles are 'easy-clean' grey rubber. The temperature is controlled thermostatically for comfort and safety. There is an override switch set at 38 degrees C. The recommended water pressure is 0.5 - 6 bars. The Shower Rail measures approx 74 cms in height and is made of brass with a chrome finish. The ends are plastic/chrome. It comes with a soap dish. (NB The actual one supplied my vary slightly from the one shown in the picture). The Flexible Hose measures 1.5m and both it and the Handheld Shower Head are finished in Chrome. heart
  • £  199.95 P & P: see site
    at OurTaps
    help WHAT'S INCLUDED: 1. THERMOSTATIC 3 WAY (3 OUTLET FUNCTIONS) SHOWER MIXER VALVE IN CHROME . This is an 'All Metal' Thermostatic Mixer Valve with 3 outlets. This includes the control knobs. The upper knob is a Diverter control which switches water between the 3 outlets. The middle knob is the on/off control. Both use Ceramic discs to control the water flow/direction. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass and finished with highly polished Chrome. The beautiful 'mirror-like' Front Plate measures 17.5cms wide by 32.5cms high. The body of the Valve requires a minimum recess depth of 9cms. The inlets/outlet are 3/4" BSP female (NB. they measure 1" across in diameter), although the ends can be removed to reveal 1/2" BSP male ones, if preferred. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. STAR SHOWER HEAD: The Quality Star or 'Cloudburst' Shower Head is solidly made from brass with a polished Chrome finish. It measures some 7" (18.5cms) in diameter and has a swivel joint on top. Water emanates from the body and the prongs! 3. SHOWER ARM: A 'Wall-mounted' round style polished Chrome Arm (solidly made from brass) comes with the Head. It has 3/4 inch threaded ends (outside diameter) and it comes with a Chrome cover plate and securing nut/washer. It measures 35cms long and has a drop of 7cms. It is possible to exchange the Arm for a 15cms / 6" Ceiling-mounted one (round style). The price is the same. Simply make your purchase and add a note stating your preference. 4. ADJUSTABLE SHOWER RAIL: The Adjustable Shower rail measures approx 58cms in height. It's body is made of brass and the ends, sliding holder and soap dish are 'plastichrome'. It comes with fittings. 5. FLEXI HOSE: A metal Flexible Shower Hose that is 1.5m long. 6. HANDHELD SHOWER HEAD: A Stylish round 'pencil' style Handheld Shower Head that measures 21 cms (Length) x 3 cms (diameter) and is made of brass with a chrome finish. 7. WALL-OUTLET: A solidly made round style Wall-outlet that enables the connection between the Flexible hose and the concealed pipework. 8. BATH FILLER SPOUT: This Bath Filler Spout measures some 14.5cms in length and is solidly made from brass with a highly polished Chrome Finish. There is a mesh diffuser in the end of the spout to assist with smooth water flow, the threaded connection is 1/2" BSP and it has a securing nut. heart
  • £  204.95 P & P: see site
    at OurTaps
    help WHAT'S INCLUDED: 1. THERMOSTATIC 3 WAY (3 OUTLET FUNCTIONS) SHOWER MIXER VALVE IN CHROME . This is an 'All Metal' Thermostatic Mixer Valve with 3 outlets. This includes the control knobs. The upper knob is a Diverter control which switches water between the 3 outlets. The middle knob is the on/off control. Both use Ceramic discs to control the water flow/direction. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass and finished with highly polished Chrome. The beautiful 'mirror-like' Front Plate measures 17.5cms wide by 32.5cms high. The body of the Valve requires a minimum recess depth of 9cms. The inlets/outlet are 3/4" BSP female (NB. they measure 1" across in diameter), although the ends can be removed to reveal 1/2" BSP male ones, if preferred. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. RAIN SHOWER HEAD: A Quality Rain Shower Head that is very solidly made from brass with a polished Chrome finish. It measures some 7.5" in diameter and has a swivel joint on top. The Nozzles are easy clean rubber! 3. SHOWER ARM: A 'Wall-mounted' round style polished Chrome Arm (solidly made from brass) comes with the Head. It has 3/4 inch threaded ends (outside diameter) and it comes with a Chrome cover plate. It measures 35cms long and has a drop of 7cms. It is possible to exchange the Arm for a 15cms / 6" Ceiling-mounted one. The price is the same. Simply make your purchase and add a note stating your preference. 4. ADJUSTABLE SHOWER RAIL: The Adjustable Shower rail measures approx 58 cms in height. It's body is made of brass and the ends, sliding holder and soap dish are 'plastichrome'. It comes with fittings. 5. FLEXI HOSE: A metal Flexible Shower Hose that is 1.5m long. 6. HANDHELD SHOWER HEAD: A Stylish round 'pencil' style Handheld Shower Head that measures 21cms (Length) x 3cms (diameter) and which is made of brass with a chrome finish. 7. WALL-OUTLET: A solidly made round style Wall-outlet that enables the connection between the Flexible hose and the concealed pipework. 8. BATH FILLER SPOUT: This Bath Filler Spout measures some 14.5cms in length and is solidly made from brass with a highly polished Chrome Finish. There is a mesh diffuser in the end of the spout to assist with smooth water flow, the threaded connection is 1/2" BSP and it has a securing nut. heart
  • £  209.95 P & P: see site
    at OurTaps
    help WHAT'S INCLUDED: 1. THERMOSTATIC 3 WAY (3 OUTLET) SHOWER MIXER VALVE IN CHROME . This is an 'All Metal' Thermostatic Mixer Valve with 3 outlets. This includes the control knobs. The upper knob is a Diverter control which switches water between the 3 outlets. The middle knob is the on/off control. Both use Ceramic discs to control the water flow/direction. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass and finished with highly polished Chrome. The beautiful 'mirror-like' Front Plate measures 17.5cms wide by 32.5cms high. The body of the Valve requires a minimum recess depth of 9cms. The inlets/outlet are 3/4" BSP female (NB. they measure 1" across in diameter), although the ends can be removed to reveal 1/2" BSP male ones, if preferred. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. STAR SHOWER HEAD & ARM: The Quality Star or 'Cloudburst' style Shower Head is solidly made from brass with a polished Chrome finish. It measures some 7" (18.5cms) in diameter and has a swivel joint on top. Water emanates from both the body and the prongs! A solidly made 'Wall-mounted' polished Chrome Arm (made from brass) comes with the Head. It has 1/2" BSP threaded ends. It comes with a Chrome cover plate & securing nut/washer. It measures approx 35cms long and has a drop of 7cms. This arm may be exchanged for a 15cms / 6" Ceiling-mounted Arm if preferred. The price is the same. Simply make your purchase and add a note stating your preference. 3. ADJUSTABLE SHOWER RAIL, HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The Adjustable Shower rail measures approx 58cms in height. The rail itself is made of brass and the ends, sliding shower holder and soap dish are 'plastichrome'. It comes with fittings. The Flexible Shower Hose is 1.5m long and comes with a stylish round 'pencil' style Handheld Shower Head. The slimline 'Pencil' style Handheld head measures 21cms (Length) x 3cms (diameter) and is made of brass with a chrome finish. The Wall Outlet is also round style and enables the connection between the Flexible hose and the concealed pipework. 4. WALL MOUNTED WATER MASSAGE BODY JETS. Solidly made of Brass with a highly polished Chrome Finish, these Round 'Concealed' style Body Jets have 3 individually adjustable outlets. Each outlet measures 5cms in diameter and has 9 holes. The front cover plate is 30cms high, 6cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  219.95 P & P: see site
    at OurTaps
    help what's included: 1. THERMOSTATIC 3 WAY (3 OUTLET FUNCTIONS) SHOWER MIXER VALVE IN CHROME . This is an 'All Metal' Thermostatic Mixer Valve with 3 outlets. This includes the control knobs. The upper knob is a Diverter control which switches water between the 3 outlets. The middle knob is the on/off control. Both use Ceramic discs to control the water flow/direction. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass and finished with highly polished Chrome. The beautiful 'mirror-like' Front Plate measures 17.5cms wide by 32.5cms high. The body of the Valve requires a minimum recess depth of 9cms. The inlets/outlet are 3/4" BSP female (NB. they measure 1" across in diameter), although the ends can be removed to reveal 1/2" BSP male ones, if preferred. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. SQUARE SHOWER HEAD & ARM: The Quality Square Shower Head is very solidly made from brass with a polished Chrome finish. It measures some 195 X 195mm (approx 7.5" square), has a swivel joint on top and 'easy-clean' rubber nozzles. A 'Wall-mounted' square style polished Chrome Arm (made from brass) comes with the Head. It has 1/2" BSP threaded ends (measuring 3/4" outside diameter). It comes with a Chrome cover plate. It measures 40cms long and has a drop of 7cms. It is possible to exchange the Wall-mounted Arm for a 15cms / 6" Ceiling-mounted one (round style arm). The price is the same. Simply make your purchase and add a note stating your preference. 3. ADJUSTABLE SHOWER RAIL, HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The Adjustable Shower rail measures approx 58cms in height. The rail itself is made of brass and the ends, sliding holder, and soap dish are 'plastichrome'. It comes with fittings. The Flexible Shower Hose is 1.5m long and comes with a stylish slimline square style Handheld Shower Head. The square 'pencil' style Handheld head measures 20 (L) x 2.5 (W) x 2.5 (D) cms and is also made of lightweight brass with a chrome finish. The Wall Outlet is solidly made with a chrome finish and enables the connection between the Flexible hose and the concealed pipework. 4. WALL MOUNTED WATER MASSAGE BODY JETS. Solidly made of Brass with a highly polished Chrome Finish, these Round 'Concealed' style Body Jets have 3 individually adjustable outlets. Each outlet measures 5cms in diameter and has 9 holes. The front cover plate is 30cms high, 6cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  209.95 P & P: see site
    at OurTaps
    help WHAT'S INCLUDED: 1. THERMOSTATIC 3 WAY (3 OUTLET) SHOWER MIXER VALVE IN CHROME . This is an 'All Metal' Thermostatic Mixer Valve with 3 outlets. This includes the control knobs. The upper knob is a Diverter control which switches water between the 3 outlets. The middle knob is the on/off control. Both of these use Ceramic disc cartridges. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass and finished with highly polished Chrome. The beautiful 'mirror-like' Front Plate measures 17.5 cms wide by 32.5 cms high. The body of the Valve requires a minimum recess depth of 9 cms. The inlets/outlet are 3/4" BSP female (NB. they measure 1" across in diameter), although the ends can be removed to reveal 1/2" BSP male ones, if preferred. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. RAIN SHOWER HEAD & ARM: The Quality Rain style Shower Head is solidly made from brass with a polished Chrome finish. It measures some 7.5" (19cms) in diameter and has a swivel joint on top. The Nozzles are easy clean rubber! A solidly made round style 'wall-mounted' polished Chrome Arm (made from brass) comes with the Head. It has 1/2" BSP threaded ends. It comes with a Chrome cover plate and securing nut/washer. It measures 40cms long and has a drop of 7cms. It is possible to exchange the Wall-mounted Arm for a 15cms / 6" Ceiling-mounted one. The price is the same. Please make your purchase and add a note stating your preference. 3. ADJUSTABLE SHOWER RAIL, HANDHELD HEAD, FLEXI HOSE & WALL OUTLET: The Adjustable Shower rail measures approx 58cms in height. The rail itself is made of brass and the ends, sliding holder and soap dish are 'plastichrome'. The Flexible Shower Hose is 1.5m long and comes with a stylish round 'pencil' style Handheld Shower Head. The slimline 'Pencil' style Handheld head measures approx 21cms (Length) x 3 cms (diameter) and is made of lightweight brass with a chrome finish. The Wall Outlet is also round style and enables the connection between the Flexible hose and the concealed pipework. 4. WALL MOUNTED WATER MASSAGE BODY JETS. Solidly made of Brass with a highly polished Chrome Finish, these Round 'Concealed' style Body Jets have 3 individually adjustable outlets. Each outlet measures 5cms in diameter and has 9 holes. The front cover plate is 30cms high, 6cms wide and 2.5mm thick. It requires approximately 6cms depth for fixing into the 'concealed' pipework. The inlet connection at the back is 1/2" BSP 'male'. heart
  • £  209.95 P & P: see site
    at OurTaps
    help WHAT'S INCLUDED: 1. THERMOSTATIC 3 WAY (3 OUTLET FUNCTIONS) SHOWER MIXER VALVE IN CHROME . This is an 'All Metal' Thermostatic Mixer Valve with 3 outlets. This includes the control knobs. The upper knob is a Diverter control which switches water between the 3 outlets. The middle knob is the on/off control. Both use Ceramic discs to control the water flow/direction. The lower control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The Valve is Wall-mounted and attaches to concealed pipework. The body is solidly made of brass and finished with highly polished Chrome. The beautiful 'mirror-like' Front Plate measures 17.5cms wide by 32.5cms high. The body of the Valve requires a minimum recess depth of 9cms. The inlets/outlet are 3/4" BSP female (NB. they measure 1" across in diameter), although the ends can be removed to reveal 1/2" BSP male ones, if preferred. The recommended water pressure is between 1 and 5 bar. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water / un-vented hot water / Standard hot water cylinder type systems. 2. SQUARE SHOWER HEAD: A Quality Square Shower Head that is very solidly made from brass with a polished Chrome finish. It measures some 8" X 8" (20 x 20 cms), has a swivel joint on top andhas 'easy clean' rubber nozzles. 3. SHOWER ARM: A 'Wall-mounted' square style polished Chrome Arm (solidly made from brass) comes with the Head. It has 1/2" BSP threaded ends (3/4" outside diameter) and it comes with a Chrome cover plate. It measures 40 cms long and has a drop of 7 cms. It is possible to exchange the Arm for a 15 cms / 6" Ceiling-mounted one. If you want to exchange the wall arm for the ceiling one, please just add a note to your purchase stating your preference. 4. ADJUSTABLE SHOWER RAIL: The Adjustable Shower Rail measures approx 58 cms in height. It's body is made of brass and the ends are 'plastichrome', all in a chrome finish. It comes with a soap dish and fittings. 5. FLEXI HOSE: A metal Flexible Shower Hose that is 1.5m long. 6. HANDHELD SHOWER HEAD: A Stylish slimline square style Handheld Shower Head that measures 21 (L) x 2.5 (W) x 2.5 cms (D), and which is made of brass with a chrome finish. 7. WALL-OUTLET: A solidly made round style Wall-outlet that enables the connection between the Flexible hose and the concealed pipework. 8. BATH FILLER SPOUT: This Bath Filler Spout measures some 14.5 cms in length and is solidly made from brass with a highly polished Chrome Finish. There is a mesh diffuser in the end of the spout to assist with smooth water flow, the threaded connection is 1/2" BSP and it has a securing nut. heart
  • £  47.50 P & P: see site
    at OurTaps
    help Oval shaped 2 way (2 outlet) Thermostatic Shower Valve (concealed style). The main body is made from brass and it has a chrome Finish. The Front plate measures approx 17 X 18 cms. The inlets/outlets are 1/2" BSP (male) connections. The temperature is controlled thermostatically for comfort and safety. There is an override switch set at 38 degrees C. The Recommended Operating Pressure is 1 to 5 bar. Cold Water Supply 5-29 deg C. Hot Water Supply 50-80 deg C. Operating Range 20 - 50 degrees C. This shower valve is also available with a variety of shower, heads, arms, etc. heart
  • £  4.95 P & P: see site
    at OurTaps
    help REPLACEMENT THERMOSTATIC CONTROL HANDLE FOR 057 BATH MIXER & VARIOUS SHOWER VALVES: The Control handle comes with a 'stop ring', grub screw & end cap, and fits the 057 Bath Shower Mixer and various shower valves (058, 034, & 063). Specification & Features: Made from ABS plastic with 'mirror' chrome finish. The stop ring is used to stop the handle turning beyond the 38 degrees point unless the spring loaded red button is depressed. To install it with a Bath Mixer Tap or one of the Shower valves, to remove the old handle all you have to do is prise off the end cap and undo the grub screw inside the handle. heart
  • £  4.95 P & P: see site
    at OurTaps
    help REPLACEMENT THERMOSTATIC CONTROL HANDLE FOR 057 BATH MIXER & VARIOUS SHOWER VALVES: The Control handle comes with a 'stop ring', grub screw & end cap, and fits the 057 Bath Shower Mixer and various shower valves (058, 034, & 063). Specification & Features: Made from ABS plastic with 'mirror' chrome finish. The stop ring is used to stop the handle turning beyond the 38 degrees point unless the spring loaded red button is depressed. To install it with a Bath Mixer Tap or one of the Shower valves, to remove the old handle all you have to do is prise off the end cap and undo the grub screw inside the handle. heart
  • £  69.95 P & P: see site
    at OurTaps
    help DECK-MOUNTED THERMOSTATIC BATH SHOWER MIXER TAPS. Specification & Features: These Thermostatic Bath/Shower Mixer Tap are Deck-mounted. They have a connection for a shower hose on top of the body and this is controlled by the 'diverter' knob on top of the spout. This outlet is 1/2" BSP (measuring 3/4" diameter outside). The spout has a metal mesh filter for smoother water flow. The body is solidly made of brass with a polished Chrome finish. The recommended pressure is between 1 and 5 bar, although they should work at 0.5 bar. NB: To achieve 0.5 bars of pressure with a gravity tank you need a height drop of some 5 metres. The overall width of the taps is 26.5 cms, the height of main body is 4 cms, the depth of the main body is approx 5 cms, and the spout reaches some 8 cms from the body. The taps come with Deck-mounting 'legs' which are attached to the rear of the taps using the nuts on the back of the taps. The distance between the centres of the 2 nuts is 150mm, however the distance between the inlet centres at the base of the 'pillar' legs is some 180mm (UK standard). The legs come with securing nuts/washers. The left control knob (as you look at the front of the taps) controls the water on/off/flow using a ceramic disc. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems. The maximum unbalanced water pressure ratio is 5:1. heart
  • £  9.99 P & P: £  0.00
    at silver12moon14
    heart
  • £  3.20 P & P: £  3.20
    at dveli1234
    heart
  • £  37.95 P & P: £  0.00
    at uk.plumbing
    heart
  • £  45.00 P & P: £  4.30
    at rikos007
    heart
  • £  7.50 P & P: £  0.00
    at ashbez2004
    heart
  • £  17.95 P & P: £  0.00
    at hrh_solutions-4-heating
    heart
  • £  7.50 P & P: £  0.00
    at ashbez2004
    heart
  • £  40.00 P & P: £  0.00
    at barrie19622001
    heart
  • £  7.00 P & P: £  3.20
    at jaggsiebear101
    heart
  • £  9.99 P & P: £  2.95
    at mummypig27
    heart
  • £  64.95 P & P: £  0.00
    at jams-toyshop
    heart
  • £  1.20 P & P: £  3.99
    at caravan-man-89
    heart
  • £  66.50 P & P: £  0.00
    at adlink-co-uk
    heart
  • £  68.02 P & P: £  0.00
    at the-heat-is-on-247
    heart
  • £  0.99 P & P: £  3.99
    at caravan-man-89
    heart
  • £  39.95 P & P: £  0.00
    at date-66
    heart
  • £  20.00 P & P: £  5.00
    at chrish25
    heart
  • £  64.99 P & P: £  0.00
    at golden_lion30
    heart
  • £  107.98 P & P: £  0.00
    at the-heat-is-on-247
    heart
  • £  13.99 P & P: £  0.00
    at ukdiy579
    heart
  • £  10.94 P & P: £  8.68
    at Amazon Marketplace
    help fridge thermostat kit for Danfoss No.3 heart
  • £  23.82 P & P: £  0.00
    at Amazon Marketplace
    help Ariston MS Series, Hotpoint RLA, RLM Series fridge freezer thermostat Danfoss ROHS Ms11 11F 11M heart
  • £  49.95 P & P: see site
    at Amazon
    heart
  • £  88.90 P & P: see site
    at Amazon
    heart
  • £  56.39 P & P: see site
    at Amazon
    heart
  • £  53.45 P & P: see site
    at Amazon
    heart

Sort List By:

My Favorites

Add your favorites by clicking
on the heart!

Write a review on thermostat danfoss

Your opinion is important to us!
Let us know what you think by
writing a review about this
product.

WRITE A REVIEW
close

How likely are you to recommend SupaPrice.co.uk?

Likelihood to recommend SupaPrice.co.uk

Did SupaPrice.co.uk meet your shopping needs?

Yes       No

Please tell us the reason for your score above.